• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.181-189
• /
• 2018

In this study, the risk rates of different contamination sources of the contaminant in a minienvironment were analyzed through Computational Fluid Dynamics (CFD) simulation. The airflow pattern characteristics can only predict the qualitative variation of contaminant concentration, but cannot evaluate the quantitative variations in the risk rate of sources. From the results, the ambient contamination sources mainly affect wafers in the Front Opening Unified Pod (FOUP), whereas the internal contamination sources mainly affect wafers laid on the robot arm in the minienvironment. And the purging plenum system is very useful in protecting the wafers in the FOUP from contaminants transferred from the Fan Filter Unit (FFU). However, this system is unable to protect the wafers on the robot arm from internal contaminants and the wafers in the FOUP from sources of the interface between the FOUP and the minienvironment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.388-394
• /
• 1999

To compare the effect of hyaluronate and dexamethasone on the temporomandibular joint arthrocentesis the author investigated 22 temporomandibular joint disorder(TMD) patients with pain and limitation of mouth opening who visited at the Department of Oral and Maxillofacial Surgery. Chosun Dental Hospital and were made a diagnosis as Wilkes stage III or IV of TMJ internal derangement clinically and radiographically. The two groups consisted of 10 patients with injection of sodium hyaluronate 10mg$(Artz^{(R)})$(hyaluronate group) on the upper joint space of the affected temporomandibular joint 5 times at intervals of a week after arthrocentesis, and 12 patients with injection of dexamethasone$(Oradexon^{(R)})$ at a time(dexamethasone group). Maximum mouth opening, pain value and satisfaction value during mastication were assessed on a visual analog scale before arthrocentesis and after 6 months. Then the within-group and between-group differences were evaluated in the obtained data and the clinical success rate of each group was calculated according to our success criteria. The results were as follows. 1. the mean of maximum mouth opening before arthrocentesis and after 6 months in the hyaluronate group were 24.9mm and 39.0mm respectively, and those before arthrocentesis and after 6 months in the dexamethasone group were 25.7mm and 41.3mm respectively. 2. The mean of pain value on a visual analog scale in the hyaluronate group before arthrocentesis and after 6 months were 6.7 and 1.8 respectively, and those in the dexamethasone group before arthrocentesis and after 6 months were 7.0 and 1.8 respectively. 3. The mean of satisfaction value during mastication on a visual analog scale in the hyaluronate group before arthrocentesis and after 6 months were 2.8 and 7.7 respectively, and those in the dexamethasone group before arthrocentesis and after 6 months were 3.1 and 7.8 respectively. 4. There were statistically significant differences between all measurements before arthrocentesis and after 6 months(P<0.001), but no difference between all measurements in the hyaluronate group and those in the dexamethasone group. 5. The over all success rate of the hyaluronate group and the dexamethasone group were 60.0% and 63.6% respectively. In summary, there was significant difference between the effect of hyaluronate and dexamethasone on the temporomandibular joint arthrocentesis but hyaluronate is better than corticosteroid as the injection drug in consideration of the side effect related with repeated injection.

• 한국화재소방학회논문지
• /
• 제31권5호
• /
• pp.19-27
• /
• 2017

밀폐된 구획실 화재에서 화원의 면적 및 위치, 화재성장률, 구획 체적의 변화가 열발생률을 포함한 주요 화재특성에 미치는 영향이 검토되었다. 이를 위해 닫힌 개구부가 적용된 ISO 9705 화재실을 대상으로 Fire Dynamics Simulator (FDS)를 활용한 화재시뮬레이션이 수행되었다. 주요 결론으로서, 화원의 면적 및 위치의 변화는 최대 열발생률, 총 열량, 상층부의 최대 온도 및 화학종 농도를 포함한 구획 내의 열적 특성과 화학적 특성에 큰 영향을 주지 않음을 확인하였다. 그러나 화재성장률과 구획 체적의 증가는 최대 열발생률 및 총 열량의 증가를 가져오며, 한계산소농도의 감소 및 최대 CO 농도의 증가를 발생시킨다. 마지막으로 화재성장률과 구획 체적의 함수로 표현된 최대 열발생률의 상관식을 도출하여, 밀폐된 구획실 화재에 대한 화재성장곡선의 적용을 위한 방법론이 제안되었다.

• 한국컴퓨터산업학회논문지
• /
• 제3권9호
• /
• pp.1145-1156
• /
• 2002

스테레오 비전 시스템을 이용하여 이동 물체의 거리와 속도를 측정하기 위한 방법을 제안하였다. 이동 물체의 거리와 속도 측정에 있어서 가장 중요한 요소 중 하나는 물체 추적의 정확성이다. 따라서 빠르게 움직이는 물체 추적을 위해 배경 영상 기법을 이용하였고, 물체의 그림자와 잡음을 제거하기 위해 지역 Opening 연산을 이용하였다. 적응형 임계치를 적용하여 자기 변화에 상관없이 이동 물체의 추출 효율을 높이도록 하였다. 좌, 우 중심점 위치를 보정하여 더 정확한 물체의 속도와 거리를 측정할 수 있도록 하였다. 배경 영상 기법과 지역 Opening 연산을 사용하여 계산 과정을 줄임으로써 이동 물체의 거리와 속도의 실시간 처리가 가능하도록 하였다. 실험 결과, 배경 영상 기법은 다른 알고리즘과는 달리 빠르게 움직이는 물체를 추적할 수 있음을 보여준다. 적응형 임계치를 적용하여 후보 영역을 줄임으로써 목표물 추출 효율이 개선되었다. 양안 시차를 이용하여 목표물의 중심점을 보정함으로써 거리와 속도 측정 오차가 감소하였다. 스테레오 카메라에서부터 이동 물체까지의 거리 측정 오차율은 2.68%, 이동 물체의 속도 측정 오차율은 3.32%로 본 시스템의 향상된 효율성을 나타냈다.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.562-575
• /
• 2023

새만금 호의 수질 개선을 위하여 국가에서 해수 유통을 증가시킴에 따라 해수 유통 빈도 증가로 인한 새만금 호 내 염분과 저층수 교환 변화를 알아보기 위하여, EFDC(Environmental Fluid Dynamics Code) 모델을 이용하였다. 갑문 개폐 횟수를 하루 1회에서 2회로 증가했을 때, 새만금 호 내부 수위는 최대 약 0.7 m 상승하였다. 염분은 서측 방조제 근방에서 2.12 psu 증가하였으며, 담수 유입 부근에서는 1.18 psu 감소하였다. 입자추적을 이용하여 저층수 교환 정도 분석한 결과, 수심 5m 이하 입자 잔류율은 Case 2(1일 2회 개방)에서 Case 1(1일 1회 개방)에 비해 2.52% 감소한 것으로 나타났다. 이는 수문 개폐 횟수를 증가시켰을 때, 저층수 교환이 더 활발해 질 수 있다는 것을 알 수 있다. 따라서 해수 유통 증가에 따른 염분 및 저층수 교환 증가로 새만금 호의 수질 개선이 될 수 있다고 판단된다.

• 수산해양기술연구
• /
• 제39권3호
• /
• pp.189-196
• /
• 2003

무부자 쌍끌이 중층망은 유속에 관계없이 뜸줄은 거의 일직선으로 유지되고 뜸줄의 깊이 변화가 없었다 또한, 뜸이 없기 때문에 부력은 작용하지 않지만 아래 끌줄의 길이를 조절함으로써 망고를 유지할 수 있었다. 그리고, 무부자 썽끌이 중층망의 전개성능은 발줄의 침자 외에도 추(Front weight)와 날개끝 추(Wing-end weight)의 침강력을 증가시킴으로써 더욱 향상될 수 있었다. 연구는 회류수조에서의 모형실험을 통하여 무부자쌍끌이 중층망의 추와 날개끝 추의 무게에 따른 전개 성능을 규명하고 그 결과를 기준형과 비교 분석하였다. 그 결과를 요약하면 다음과 같다. 1. 유체저항은 유속이 2.0∼5.0knot로 증가함에 따라 거의 직선적으로 증가하였으며, 느린 유속에서는 저항의 증가폭이 작지만, 유속이 빠를 때는 저항의 증가폭이 커지는 경향을 보였다. 추의 무게 및 날개끝 추의 무게의 증가함에 따라서도 유체저항은 증가 하였다. 2. 망고는 유속이 증가함에 따라 거의 직선적으로 감소하는 경향을 나타내었으며, 망고의 감소율은 기준형보다 무부자망이 낮았다. 추의 무게가 0.70ton 에서 1.75ton으로 증가할 때 각 단계별로 약 2m씩, 날개끝 추의 무게가 0.28ton에서 1.11ton으로 증가할 때 각 단계별로 약 1m씩 각각 망고가 증가하였다. 망폭은 기준형보다 모든 무부자망이 약 10m 정도 더 컸으며, 추와 날개끝 추의 무게가 증가햄에 따라 그 변화폭은 2m 내외로 거의 일정하였다. 3. 망구면적은 추의 무게가 1.75ton 일 때, 날개끝 추의 무게가 1.11ton일 때 최대가 되었고 유속이 2.0∼3.0knot에서는 무부자망이 기준형보다 작았으나, 4.0-5.0knot에서는 무부자망이 기준형보다 더컸다. 4. 여과량은 기준형에서는 3.0knot일 때, 무부자망에서는 4.0knot일 때 각각 최대가 되었으며, 추의 적정무게는 1.40ton이었다. 팀은 환자가 원하는 영적 간호를 실시하도록 체계적인 접근 방법을 강구해야 할 것으로 사료된다.된다. 통하여 움직임 감소 장치를 사용함으로써 내부 장기 중 횡격막 움직임의 범위가 감소함과 동시에 CTV-PTV 마진이 크게 줄어드는 결과를 확인하였다. 이 결과를 통하여 흉부 또는 복부에 종양을 가진 환자 치료 시 더욱 질 높은 방사선 치료가 실현될 것으로 기대한다. 30∼40％ 정도 느렸고, 퍼레니얼라이그라스도 퍼레니얼라이그라스 100％ 단일종류에 비해 20∼30％정도 늦었다. 따라서, 뗏장 재배시 여러 종류의 초종을 천편일률적으로 혼합하여 파종하는 것은 바람직하지 않으며, 컨셉에 따라 적절하게 초종 및 품종을 선택해서 사용하는 것이 필요하다. 5. 뗏장의 뿌리 형성 능력은 퍼레니얼라이그라스가 가장 좋았고, 가장 저조한 초종은 켄터키블루그라스였다. 톨훼스큐는 켄터키블루그라스와 퍼레니얼라이그라스의 중간정도로 나타났다. 혼합구의 뗏장 형성 능력은 초종의 혼합비에 따라 뿌리 형성력 차이가 다르게 나타났는데, 특히 퍼레니얼라이그라스 혼합비율이 많을수록 뿌리 형성 능력은 증가하였다. 6. 뗏장 수확시 잔디 품질은 단일 초종구의 품질이 혼합구에 비해 양호하였는데 가장 우수한 초종은 켄터키블루그라스였고, 톨훼스큐는 켄터키블루그라스 다음으로 중간정도, 그리고 퍼레니얼라이그라스는 가장 저조하였다. 켄터키블루그라스는 균일한 잔디 면, 고밀도 및 예초 후 상태가 우수한 특성으로 품질이 양호하였고, 퍼레니얼라이그라스의 품질이 저조하였던 것은 초장이 길어 잔디 면이 누운 상태로 나타나 균일도 저하 및 예초 후 품질이 켄터키블루그라스나 톨훼스큐 보다 떨어지기 때문이다. 그리고 혼합구의 품질은 여러 종류가 혼합됨으로 인해 색상 및 밀도의 균일도가 떨어지고, 또한 예초 시 물결처럼 불균일하게 깎여 잔디 표면이 불량하였기 때문이었다. 7. 골프장이나 경기장 기본 설계 시 초기 피복도 및 뿌리 형성력이

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.417-433
• /
• 2010

Purpose: This study evaluated the manpower planning of dental technicians. Methods: Methods : Survey was conducted regarding subject's general characteristics, characteristics of dental technician's occupational view and working conditions, and reason to enter into branches of the public health enter. The survey sample consisted of 323 dental technicians (221 male/ 102 female). Survey was conducted for one month from August 1 to September 1 in 2010. Following results were obtained. Results: 1. Regarding general characteristics of the subjects, there was a slight male predilection with 68.4%. Subjects in their 40s occupied the highest proportion of 32.2%. Majority of subjects worked in the big cities (71.5%). Favored working places were dental laboratory (57.6%) and dental hospital or dental clinic (19.5%). Although no position is available in the public sector such as public health center or health care civil servant, 9.3% preferred working in the public health center. Public sector is more favored than 2-year technical colleges or dental supply and equipment companies. In respect to education, 57% of the subjects graduated college. 67.8% were married. Subjects who specialize in the porcelain or all-ceramic were 57.9%. With regard to current position, head of the dental laboratory was most common. 2. Following occupation characteristics were found. Economic reason took the highest proportion when deciding their occupation (39.9%) followed by gaining social experience (36.5%). Majority of the subjects (76.5%) wanted to work as dental technicians until their retirement. 71.5% pursuit to become a manager of the dental laboratory. 76.1% agreed on opening a dental technician position in the public health center. Regarding an authority to lead developing the dental technician position in the public sector, majority of the subject chose ministry of health and welfare (35.6%) and Korean dental technologist association (34.7%). Employment (average, 30%) and turnover rate (average, 36.5%) of dental technology college graduates ranged from 40% to 60%. Most important factors for the employment were practical experience (41.2%) and competency (34.4%). With regard to job satisfaction, so-so as 46.7% and satisfactory was 42.7% 3. In respect to the reason for opening a position in the public health center, 'It is needed to continue denture rogram for elderly patients' obtained the highest score (4.14 point). 'Institutional devices are required to open a position for dental technicians as a public healthcare provider' received high score (4.11 point). 4. Concerning the working conditions, 'professional knowledge is required' received the highest score (4.23) followed by 'too short maternity and parental leave' (4.21). 5. Relationship between general characteristics of the subjects and favor of working in the public health center was investigated. Significant differences were found according to the current and favored working area, favored occupation, education level, marital status, and specialty. Working in the public health center was favored by following subjects: working in mid- or small-sized cities (4.16 point, p<0.05); PhD degree-holder (4.59 point, p<0.01). 6. Among general characteristics of the subjects, significant difference of working conditions was found in the following factors: gender; working areas; favored working areas; favored working positions, and education level. Majority of subjects favored working in big cities and currently work in big cities although satisfaction was comparatively low (3.75 score). 7. Future plan to work in public health center was evaluated according to occupational characteristics. Subject's intention to work in the public healthcare center was significantly affected by opening of dental technician position, leading authority, average turnover rate, and factors affecting employment. Working in the public health care center was favored by the following subjects: Dental technicians who actively supported opening of the dental technician position (4.34 point, p<0.001); subjects who thought the Korean dental technologist association is responsible for the opening of positions in the public sector (4.26 point, p<0.001); and subjects who thought that attitude and character are important for the employment (p<0.001). 8. Concerning difference of working conditions according to the occupational characteristics, significant difference was demonstrated by factors such as a reason to choose to be a dental technician, work plan, pursuing position, responsible authority, average employment rate, and job satisfaction. High standard of working conditions was required in subjects who selected to be a dental technician for the leisure time after work (s.05 point, p<0.01), who planted to work until their marriage (4.25 point, p<0.001), and who pursuit to be a manager (3.98, p<0.05). 9. In respect to influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.068 and age affected the working condition with significant difference according to the pvalue. 10. Regarding influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.335 and work plan, opening of dental technician position in the public sector, and responsible authority had significant influence over the subject's intention to work in the public health center according to the p-value. 11. With regard to the influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.091 and reason to choose to be a dental technician, work plan, and responsible authority significantly affected subject's working conditions. Conclusion: Korean society is becoming a super-aged society according to several statistics. As aged population is rapidly increasing, national health insurance plans to cover denture for senior citizen over 75 years old from 2012. Therefore, dental technicians are urgently needed in the public health centers all over the nation. Many subjects in this study planed to work until their retirement and recognized dental technician's expertise. Ministry of health and welfare and Korean dental technologist association should co-operate each other to prepare foundation and institutional devices for dental technicians to advance into the public health center. This will improve oral health of the population. This study showed urgency of medical facilities and services which meets increasing number of aged population and welfare of the population.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.9-18
• /
• 2014

Small and medium-sized local airports have suffered from chronic operating deficits due to many factors except for large airports in Incheon, Gimpo, Jeju and Gimhae. These small and medium-sized local airports have currently been degraded to inefficient airports handling the significantly lower airline demand than their carrying capacities. In this context, this study conducted a survey on the actual conditions of the airline demand in small and medium-sized local airports for the last 10 years after the opening of the Korea Train eXpress and investigated the causes and actual conditions of an increase and a decrease in the airline demand. In addition, it analyzed the functionality, convenience and economic feasibility, competition elements in comparison with other means of transportation, and the actual competitive conditions of local airports. It investigated facility improvements through a field visit for local airports and analyzed the performance rate of passenger demands and the use rate of terminal facilities according to a change in the airline demand. This study aimed to provide basic data in the architectural planning field, needed to establish a plan for the airport revitalization of local airports with the results of an analysis on the actual conditions of small and medium-sized local airports.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.47-53
• /
• 2001

This paper investigates the characteristics of interlaminar fracture toughness of foam core sandwich structures under opening mode by using the double cantilever beam (DCB) specimens which are Carbon/Epoxy and foam core composites. Instead of using a DCB specimen of symmetric geometry, a non-symmetric DCB specimen was used to calculate the interlaminar fracture toughness. Three approaches for calculating the energy release rate(G$\sub$IC/) were used and fracture toughness of foam core sandwich structures made by autoclave, vacuum bagging and hotpress were compared. Experiment, analysis using nonlinear beam bending theory, and numerical work by FEM methods were performed. Bonding surface compensation and equivalent moment of inertia were used to calculate the energy release rate in nonlinear analytical work. Conclusions of experimental, nonlinear analytical and FEM methods were compared. It is, also, shown that the vacuum bagging forming can substitute the method of autoclave without serious loss of Mode I energy release rate(G$\sub$I/).

• Industrial Engineering and Management Systems
• /
• 제10권1호
• /
• pp.34-42
• /
• 2011

Many companies open multiple projects simultaneously due to market trends, which results in a crowding out effect because of limited resources. R&D engineers become overloaded and scheduling of product development is delayed resulting in timing misses and lost sales leads. The company in this case study (Company A), often opens up many projects simultaneously in order to respond to market needs quickly. The engineers are overloaded and, of course, the schedule is delayed. In order to identify problems, Company A began using Dr. Goldratt's Thinking Processes (TP) during new product development (NPD). When the analysis phase of TP was completed, Company A's core problem was identified as "the quantity of kick-off projects." Consequently, new rules and conditions and procedures were proposed for the opening, suspending, stopping, and closing of projects. Finally, the "Future Reality Tree" ensured that the proposed rules, conditions and procedures were set up as an available solution approved for practical application by executives. After a one-year trial run, the results showed that the Project Duration Rate was reduced by 53%, the Project Closed Rate was increased by 140% and the Project on Time Rate was increased from 10% to 68%. The above results give significant evidence of the benefits of the proposed methodology.