• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.19-30
• /
• 2022

The static strength and fatigue crack resistance of the aircraft skin structures depend on the materials used and joint type. Most of the commercial aircraft's skin panel structures are made from aluminium alloy and carbon fibre reinforced epoxy. In this study, the fatigue resistance of four joint configurations (metal/metal, metal/composite, composite/composite and composite/metal) with riveted, adhesive bonded, and hybrid joining techniques are investigated with experiments and finite element analysis. The fatigue tests were tension-tension because of the typical nature of the loads on aircraft skin panels susceptible of experimenting fatigue. Experiment results suggest that the fatigue life of hybrid joints is superior to adhesive bonded joints, and these in turn much better than conventional riveted joints. Thanks to the fact that, for hybrid joints, the adhesive bond provides better load distribution and ensures load-carrying capacity in the event of premature adhesive failure while rivets induce compressive residual stresses in the joint. Results from FE tool ABAQUS analysis for adhesive bonded and hybrid joints agrees with the experiments. From the analysis, the energy release rate for adhesive bonded joints is higher than that of hybrid joints in both opening (mode I) and shear direction (mode II). Most joints show higher energy release rate in mode II. This indicates that the joints experience fatigue crack in the shear direction, which is responsible for crack opening.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.1
• /
• pp.7-19
• /
• 2023

Purpose: Mobility impairment persons are all people who experience mobility difficulties in their daily lives, which makes up about 30% of the population in Seoul Metropolitan City; this number is expected to increase with population aging. As the number of mobility impairment persons in need of vision correction increases, it is necessary to create the Universal Design guidelines and to provide the foundation to access convenience facilities at the entrance of optical shops, a health and medical institution. Methods: Of the 2,282 optical shops located in Seoul, 252 optical shops were chosen for data collection of actual photos, from April 10, 2022 to September 4, 2022. Based on the photographs, the height difference between the entrance and the sidewalk, safety handles, and opening and closing methods of entrances were investigated, as these factors correspond to the accessibility and the mobility of the mobility impairment persons. Results: Of the 252 optical shops surveyed, 114 (45.2%) have resolved the problems of height difference through improving horizontal accessibility (61) or using ramps (53). 36 (14.3%) optical shops chose automatic doors for opening and closing methods of the entrance. Implications: The rate of installation of access convenience facilities for the entrance of optical shops is slightly lower than the rate of installation of ramps, surveyed by the Ministry of Health and Welfare. It is necessary to apply the Universal Design to access convenience facilities for the entrance of optical shops for not only the mobility impairment persons but all people, regardless of age or ability, to conveniently access healthcare services.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.177-198
• /
• 2016

China has retained economic growth rate of average 9% for more than ten years recently after China introduced capitalistic market economy system in 1979 by Deng Xiaoping. China has attracted foreign direct investment for a long time because it has retained very high economic growth rate, low labor cost, and various policies for foreign investors. This paper tries to analyse the determinants of foreign direct investment inflow after reform-opening of China with empirical analysis methods utilizing each province·city's specific characteristics by using the panel data from 1985 to 2013. For the empirical analysis we use random effect model, fixed effect model, pooled OLS, and random coefficient model. The results by pooled OLS and random coefficient model are presented for the comparison with the main results in the process of research. The research shows the results by fixed effect model are better than those by random effect model after doing Hausman's test. The results shows that GRDP, capital stock, and telecommunication exert a positive relationship with foreign direct investment, while express way variable exerts a negative one. China's education level surprisingly does not attract foreign direct investment even though it is not at a critical level. Therefore, the Chinese government should try to increase national income level as it symbolizes market size; encourage domestic investment; and construct high quality telecommunication infrastructure.

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.71-79
• /
• 2011

Aim: Disc displacement without reduction of the temporomandibular joint (TMJ) has been managed by mandibular manipulation to reduce the displaced disc but with a low success rate. The purpose of this study was to determine whether auriculotemporal nerve block anesthesia had an effect on the reduction of the displaced disc and to analyze the factors that influenced the result. Methods: 112 patients were diagnosed with disc displacement without reduction and treated by mandibular manipulation. Disc was recaptured in 35 patients. Among the 77 patients with whom disc recapture had failed, the auriculotemporal nerve was blocked with a local anesthetic in the 49 patients (mean $age \;{\pm}\; SD\; =\; 34.4\;{\pm}\; 15.1$; male 24, female 25) and then mandibular manipulation was performed again. Factors including age, elapsed time from the onset, and opening amount were analyzed in association with disc reduction rate with the auriculotemporal nerve block. Results: Among 49 patients who did not respond to manipulation only, manual reduction with auriculotemporal nerve block anesthesia was successful in 19 patients (38.8%). Maximum unassisted opening amount significantly increased in the 19 patients with successful recapture of the disc ($mean \;{\pm}\; SD\; =\; 46.1 \;{\pm}\; 4.5\; mm$), in contrast to the limited opening amount of the 49 patients before local anesthesia of the auriculotemporal nerve ($mean \;{\pm}\; SD\; =\; 25.7 \;{\pm}\; 6.0\; mm$). Age, elapsed time after the onset, and preoperative opening amount were not associated with the reduction rate. Conclusion: The results of this study suggest that auriculotemporal nerve block anesthesia increases the reduction rate of the disc displacement without reduction of the TMJ when combined with mandibular manipulation, and such anesthesia should be applied at the first stage of manual treatment of disc displacement without reduction.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.79-86
• /
• 1998

The effect of specimen thickness on fatigue crack growth behavior has been carried out by compact tension specimens of thickness of 3mm, 10mm and 25mm for maraging steel and Al 7075-T6. The closure points were determined during the test by means of a clip-gage situated at the notch mouth. Specimen thickness have no apparent influence on the fatigue crack growth rate of maraging steel, but the crack growth rate of 25mm thickness specimen for Al 7075-T6 is faster than that of 3 and 10mm specimens. The difference of crack growth rates can be successfully explained by considering the different stress state of plane strain and plain stress due to the variation of specimen thickness. Also the crack opening ratio of 25mm specimen is greater than those of 3 and 10mm specimens. When a side groove is introduced in a 10mm specimen, the crack growth rate is approximately similar to that of 25mm specimen. The effective thickness expression of $B_e=B_o-(B_o-B_N)^2B_o$ is the most appropriate to evaluate the crack growth rate of side-grooved specimen. Fatigue crack growth rates can be well described by $\Delta K_{eff}$ of the crack closure points in regardless of all thickness and side-grooved specimens.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.11-20
• /
• 2011

PSALI is referred to the supplementary lighting for the interior lighting under the daily lighting situation, and pursuant to the pertinent regulations in energy savings design standard and others in recent architecture works, the importance thereof has been increasing gradually coupled with the energy performance index (EPI), energy savings plan and the like as well as expansion of submittal and implementation policies. However, this type of PSALI studies indeed have a number of limitations since it has surrounding environmental conditions in direction, season, region, climate, time, opening rate, window area ratio, actual index, reflection rate of finishing materials and others in the architecture work as well as frequent changes in interior lighting environment for variables in daily light volume flowing into the interior, and others. Therefore, this study has analyzed existing advance research cases to produce the actual-sized model and scaled-down model, and installed the artificial lighting of LED light source possible to reproduce with same capability on both models. As a result of comparison and analysis of the artificial lighting with the key light, it has certain level of error rate from the scaled down lighting device in certain rate and actual model butit was noticeably significant within specific scope.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.526-529
• /
• 2009

In this study, we analyze the characteristic of burning classified by a propellant according to a flux of an oxidizer to analyze propellant regression distance in accordance with a thrust control and burning time of hybrid rocket using hybrid combustor of Lab-Scale. To control a flux of an oxidizer, we design flow control system to regulate the mount of opening and shutting of a needle valve by a driving of stepping motor by a combination the needle valve with stepping motor. We derive the relationships between mass flow rate and regression rate according to a propellant through the oxidizer flux change. While doing the thrust control, we estimate regression distance through the oxidizer flux in accordance with thrust and confirm the creditability through the actual thrust control burning experimentation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.97-103
• /
• 1984

Post weld heat treatment(PWHT) of weldment of the low alloy steel is carried out to remove residual stress existing in weldment and to improve fracture toughness, but it is often observed that there occurs grain boundary failure and that fracture toughness decreases in weld heat affected zone(HAZ)because of PWHT. In this paper, the effect of heating rate and holding time of PWHT on fracture toughness were evaluated by crack opening displacement (CDD)test and micro-hardness test under the constant stress simulated residual stress in HAZ of Cr-Mo steel. The experimental results are as follow; (1)Transition temperature of weld HAZ after PWHT was dependent upon heating rate greater than holding time, and fracture toughness was decreased with an increase of the heating rate. (2)Softening ration of the notch tip was increased with holding time within one hour and saturated after one hour, but under applied stress it was increasing continuously. (3)The average hardness value in weld HAZ was increased with heating rate of PWHT.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1886-1895
• /
• 1999

The delamination behavior of multidirectional carbon-fiber/epoxy composite laminates under 10NA intermediate and high rates of test, up to rate of about 11.4m s has been investigated using the double cantilever beam specimens. The mode I loading under rates above l.0m/s showed considerable dynamic effects on the load-time curves and thus higher values of the average crack velocity than that expected from a simple proportional relationship with the test rate. The modified beam analysis utilizing only the opening displacement and crack length exhibited an effective means for evaluating the dynamic fracture energy $G_{IC}$. Based on the assumption of constant flexural modulus, values of $G_{IC}$ at the crack initiation and arrest were decreased with an increase of the test rate up to 5.7m/s, but the maximum $G_{IC}$ was increased at 11.4m/s.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.59-66
• /
• 2009

High temperature and pressure valves in power plant have been used for fluid flowing and leakage occurred owing to valve internal damage such as disc wear, crack and inserting of foreign objects etc. in these valves. Recently, multi-measuring technique applied both ultrasonic and acoustic method have been used for evaluation of valve internal leakage in order to raise measurement reliability. Therefore, we have performed various leakage tests using ultrasonic and acoustic measuring system and acquired leakage data for the various leakage conditions. In this study, we developed the estimation method of regression model through leakage data, and expectation method for valve opening ratio, which is directly proportion to leakage rate, using the established estimation model from the measured data, valve size and fluid pressure so as to enhance data reliability. As a result of this study, it was founded that expectation method of leakage rate by statistical analysis method is appropriate to valve leakage evaluation.