• Title/Summary/Keyword: Opening condition

Search Result 504, Processing Time 0.024 seconds

Characteristics of speech intelligibility and speech acceptability connected with mouth opening condition (구강 개방 상태에 따른 말 명료도 및 말 용인도 특성)

  • Song, Yun-Kyung
    • Phonetics and Speech Sciences
    • /
    • v.3 no.3
    • /
    • pp.141-148
    • /
    • 2011
  • There are many factors that affect speech intelligibility and speech acceptability. Structural anomalies and neuromotor pathologies are known for the reasons of abnormal speech sounds. And there are minor variations related to oral mechanism. Speaking with restricted mouth opening related to therapeutic procedure or habitual speech pattern might affect the quality of speech sounds. So this study compared speech intelligibility and speech acceptability of recorded 24 words in two conditions (restricted mouth opening condition and normal mouth opening condition) by 30 normal hearing adults. The results showed that speech intelligibility and speech acceptability were significantly lower in restricted mouth opening condition. And speech acceptability was significantly lower than speech intelligibility in restricted mouth opening condition. Speech acceptability in restricted mouth opening condition was significantly lower especially in open vowel. These findings indicated that the mouth opening condition could affect vowel shape and could be an adverse effect on speech intelligibility and speech acceptability.

  • PDF

Coronoid Process Hyperplasia: A Rare Case of Restricted Mouth Opening Masquerading as Temporomandibular Disorder

  • Juhyun Cha;Jin Woo Chung
    • Journal of Oral Medicine and Pain
    • /
    • v.48 no.3
    • /
    • pp.112-117
    • /
    • 2023
  • Coronoid process hyperplasia (CPH) of the mandible is a rare condition in which abnormal elongation of the coronoid process leads to chronic mandibular hypomobility. CPH causes impingement or impedance of the coronoid process on the inner surface of the frontal part of the zygomatic bone during mouth opening. The lack of significant symptoms makes the diagnosis difficult. Its etiology remains inconclusive despite several theories being suggested. In this report, three reviewed cases are presented. All three patients visited our clinic with limited mouth opening as the chief complaint. Standard clinical and radiographic examinations were conducted under the initial impression of temporomandibular disorders (TMDs), and restricted jaw movements were confirmed in all cases. The absence of improved signs and symptoms following conservative treatment for TMDs or the indeterminate plain radiographs required the attending clinicians to consider three-dimensional imagery. Computed tomography revealed bilateral coronoid hyperplasia in all cases and impingement on the zygomatic bone in two of the three cases. After concluding that this condition caused the patients' limited mouth opening, the patients were referred to the Department of Oral and Maxillofacial Surgery for possible bilateral coronoidectomy or coronoidotomy. CPH usually presents no symptoms apart from a progressive reduction of mouth opening over time. Diagnosis is often delayed, and patients may undergo unnecessary treatment procedures. Clinicians should be aware of this condition and exercise caution in the differential diagnosis of patients with chronic mandibular hypomobility.

Effects of Opening Condition of the Fore Body on the Resistance and Self-Propulsion Performance of a Ship (일반상선의 선수 개구부가 저항 및 자항성능에 미치는 영향)

  • Park, Dong-Woo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.1
    • /
    • pp.78-85
    • /
    • 2014
  • LNG-RV has the additional equipments that enable to re-gastify liquefied LNG in LNG carrier. This vessel has Submerged Turret Loading(STL) system which transports gas through submarine terminal. When LNG-RV is operating at sea, the opening condition is formed by detaching STL equipment from a vessel. The primary objective of the current work is to estimate accurate speed loss for the opening condition of the LNG-RV employing numerical calculations and model tests. In the model tests, resistance and self-propulsion tests are carried out for the bare-hull and the opening condition without STL. In addition to these, flow visualization utilizing tuft is used to make the flow patterns visible, in order to get a qualitative or quantitative information for inner part in case of detaching the STL.

An Experimental Study on Reinforcing Effectiveness of H-Shaped Steel Beams with Rectangular Web Openings (다공 H 형강보의 보강효과에 관한 실험적 연구)

  • Kim, Jin-Mu
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.3 no.3
    • /
    • pp.213-222
    • /
    • 1999
  • On condition that opening located at high shear strength position in H-shaped steel beams with web opening, beams are structurally to be frailed so necessity and efficiency of vertical reinforcement to add horizontal reinforcement already published ahead study. Up to the present study of web opening beams, limited one opening which located in comparatively small shear strength position. But frequently opening area is enlargement by necessity, so width of opening is larger by limit of depth or increasing number of opening. This study carry out experiment to make efficient reinforcing method about strength and deformation of steel beams with web openings. Parameters of this study are openings location, ratio of opening width within opening height and various reinforcing types.

  • PDF

Experimental Study for the Development of New Type Water Ejector (신형 수이젝터 개발을 위한 실험연구)

  • Mun, Soo-Bum;Choi, Hyun-Kue;Choi, Jae-Hyuk;Kwon, Hyung-Jung;Kim, Kyung-Keun;Choi, Soon-Ho
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.30 no.6
    • /
    • pp.677-684
    • /
    • 2006
  • An ejector is a fluid transfer device to be used for mixing of fluids, maintaining vacuum, and overcoming a poor suction condition. To date, most ejectors have been made from the casting process. which is time-consuming and high-cost process. Therefore, a new production method of ejectors is desired if any. In this experimental study, we proposed a new type ejector manufactured from the commercial fitting materials and the welding process, which is equipped with an orifice type nozzle. The proposed ejector has a good integrity compared with the conventional ejector because the fittings have manufactured by forging and they have more strength than the casting materials. Furthermore we adopted a multi-opening orifice type nozzle for improving a suction capacity and compared with a single-opening orifice type nozzle. From the experimental results. we confirmed that the multi-opening nozzle had a food suction capacity than the single-opening nozzle and the proposed new type ejector showed higher vacuum than the conventional type ejector in non-load condition. These improved characteristics suggests that a new type ejector by using the commercial fittings opens the feasibility to be adopted in various industry fields and that the increased suction capacity can be achieved by altering the nozzle design of a conventional ejector.

Measurement and Analysis of Knock for Rapid Throttle Opening in SI Engines (가솔린 엔진에서 급가속 운전시 노킹 측정 및 분석)

  • 이종화;박경석;김현용
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.7 no.9
    • /
    • pp.28-35
    • /
    • 1999
  • In this study, investigation of transient knock characteristics in a spark-ignition engine has been carried out. The universal knock threshold values were found by a DFDD method and a NSDBP method which is a non-dimensional version of the SDBP method. Also modified NSDBP method could be used for transient knock detection. In a commercial ECU , spark timing was retarded from the steady -state spark timing during rapid throttle opening to avoid uncomfortable feeling and knock. Knock usually occurred just after the start of rapid throttle opening when spark timing was set, as values for the steady state condition. We found that air/fuel ratio deeply involved with the knock during transient condition. Due to the difference of initial heat release rate, knock occurred more easily at rich air/fuel ratio than at lean air/fuel ratio.

  • PDF

Ventilation Efficiency of Clothing through Openings under an Isothermal Condition (등온 환경하에서 개구부를 통한 의복의 환기 효율)

  • 추미선
    • The Research Journal of the Costume Culture
    • /
    • v.6 no.4
    • /
    • pp.229-237
    • /
    • 1998
  • The ventilation efficiency of clothing was investigated by a trace gas method using a manikin wearing an impermeable overall under an isothermal condition, where the ventilation occurred only through the openings by diffusion. The ventilation patterns were different for each part of the body. The ventilation efficiency in the clothing microenvironment of the arm and the leg greatly depended on the distance from each opening when the wrist- or the ankle-opening was opened. When both side of wrist- or ankle-openings were opened to provide the opening area double respectively, the ventilation efficiency did not correspondingly increase twice, as compared one side opened. Even though it as certainly affected by the opening area, the ventilation efficiency was more significantly influenced by the position of openings.

  • PDF

The Present Condition of Opening of Archival Documents and Providing Reference Services in China (중국의 기록물 공개 및 서비스 현황)

  • Youn, Mi-Kyung
    • Journal of Korean Society of Archives and Records Management
    • /
    • v.8 no.2
    • /
    • pp.105-125
    • /
    • 2008
  • In this study, system of opening of archival documents and providing reference services and archives web service in China have been reviewed. Throughout laws and regulations of archives management since found the People's Republic of China, related to opening of archival documents and providing reference services are analyzed. This paper also consider the present condition of archives web service in China and web service of Beijing archives.

Assessment of Clothing Ventilation through Openings (개구부를 통한 의복의 환기 양상 평가)

  • 추미선
    • The Research Journal of the Costume Culture
    • /
    • v.8 no.5
    • /
    • pp.660-667
    • /
    • 2000
  • Clothing ventilation was investigated using a manikin wearing an impermeable overall under an isothermal condition, in which the ventilation occurred only through the openings. The ventilation volume was estimated by both microenvironment volume and ventilation rate, where, the microenvironment volume was measured by an air subsitution method and the ventilation rate by a trace gas method. Microenvironment volume of the experimental garment was about 21.0 liters. Even though it was certainly affected by the distance from the opening, the ventilation rate was more significantly influenced by the opening area and the shape of air layer in the clothing. The volume of air exchange in the clothing microenvironment was affected greatly by the microenvironment volume and the opening area, and it was different for each part of the body with bigger air exchange volume in the microenvironment of the leg as compared to that of the arm.

  • PDF

The Eye-Opening Conditions for the Minimum Bandwidth Signaling (최소대역폭 전송에서의 개안 조건)

  • Baek, Je-In
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.27 no.9
    • /
    • pp.1321-1326
    • /
    • 1990
  • In this paper, the eye-opening conditions are investigated for the minimum bandwidth digital transmission systems where the sinc functions is used as a basic pulse so that only the Nyquist bandwidth is required for the channel. In order for these systems to be tolerant to the timing jitter in the receiver, the eye pattern should be open horizontally. It is proved that an eye opening condition which has been understood only as a sufficiency becomes a necessity as well. As its result, having a spectral null at teh Nyquist frequency is shown to have the same meaning as eye opening.

  • PDF