• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.68-75
• /
• 2009

As the recent performance of microprocessor is improving quickly, the necessity of cache is growing because of the increase of the access time of main memory. Every block of direct-mapped cache maps to one cache line. Although the mapping rule is simple, if different blocks map to one cache line, the miss ratio will be higher than the set-associative cache due to conflicts. In this paper, for the improvement of the direct-mapped cache of OpenRISC, 4-way set-associative cache is proposed. Four blocks of the main memory of the proposed cache map to one cache line so that the miss ratio is less than the direct-mapped cache. Pseudo-LRU Policy, which is one of the Line Replacement Policies, is used for decreasing the number of bits that store LRU value. The OpenRISC core including the 4-way set-associative cache was verified with FPGA emulation. As the result of performance measurement using test program, the performance of the OpenRISC core including the 4-way set-associative cache is higher than the previous one by 50% and the decrease of miss ratio is more than 15%.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.9-15
• /
• 2014

A virtual platform models a processor core and the peripheral devices constituting the SoC in software. Major companies utilize a variety of platforms for product development with optimal SW+SoC integrated system architecture design and IP reuse based Top-Down design flow using a virtual platform. In this paper, we propose a virtual platform based on OpenRISC, an open source RISC based core. The proposed virtual platform supports high speed emulation of approximately 20 MIPS using DBT (Dynamic Binary Translation).

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.11-23
• /
• 2012

To achieve efficient code size reduction, this paper proposes a new compressed instruction set architecture for the OpenRISC architecture. The new instructions and their corresponding formats are designed by the profiling information of the existing instruction usage. New 16-bit instructions and 32-bit instructions are proposed to compressed the existing 32-bit instructions and instruction sequences, respectively. The proposed instructions can be classified into three types. The first is the new 16-bit instructions for the frequent normal 32-bit instructions such as add, load, store, branch, and jump instructions. The second type is the new 32-bit instructions for the consecutive two load instructions, two store instructions, and 32-bit data mov instructions. Finally, two new 32-bit instructions are proposed to compress function prolog and epilog code, respectively. OpenRISC hardware decoder is extended to support the new instructions. Experiments show that the efficiency of code size reduction improves by an average of 30.4% when compared to the OR1200 instruction set architecture without loss of execution performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.453-461
• /
• 2010

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of embedded RISC core and a clock-gating algorithm using ODC (Observability Don't Care) operation to improve the power consumption of the core. The branch prediction algorithm has a structure using BTB(Branch Target Buffer) and 4-way set associative cache has lower miss rate than direct-mapped cache. Pseudo-LRU Policy, which is one of the Line Replacement Policies, is used for decreasing the number of bits that store LRU value. The clock gating algorithm reduces dynamic power consumption. As a result of estimation of performance and dynamic power, the performance of the OpenRISC core applied the proposed architecture is improved about 29% and dynamic power of the core using Chartered $0.18{\mu}m$ technology library is reduced by 16%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.239-245
• /
• 2019

RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. Born in academia and research, RISC-V ISA delivers a new level of free, extensible software and hardware freedom on architecture, paving the way for the next 50 years of computing design and innovation. In this paper, according to the emergence of RISC-V architecture, we describe the RISC-V processor instruction set constituted by arithmetic logic, memory, branch, control, status register, environment call and break point instructions. Using ModelSim and Quartus-II, 38 instructions of RISC-V has been successfully simulated and synthesized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.281-284
• /
• 2008

This paper describes ASIC design of multimedia SoC Platform. The implemented Platform consists of 32-bit OpenRISC1200 Microprocessor, WISHBONE on-chip bus, VGA Controller, Debug Interface, SRAM Interface and UART. The 32-bit OpenRISC1200 processor has 5 stage pipeline and Harvard architecture with separated instruction/data bus. The VGA Controller can display RCB data on a CRT or LCD monitor. The Debug Interface supports a debugging function for the Platform. The SRAM Interface supports 18-bit address bus and 32-bit data bus. The UART provides RS232 protocol, which supports serial communication function. The Platform is design and verified on a Xilinx VERTEX-4 XC4VLX80 FPGA board. Test code is generated by a cross compiler' and JTAG utility software and gdb are used to download the test code to the FPGA board through parallel cable. Finally, the Platform is implemented into a single ASIC chip using Chatered 0.18um process and it can operate at 100MHz clock frequency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.115-121
• /
• 2023

RISC-V is an open-source instruction set architecture, and anyone can freely design and implement a RISC-V microprocessor. This paper designes and simulates the RISC-V architecture, synthesizing it in FPGA and verifying it using logic analyzer (ILA). RISC-V core is written in SystemVerilog, which has efficient design and high reusability, and can be used in various application fields. The RISC-V core is implemented as hardware by synthesizing it on the Ultra96-V2 FPGA board using Vivado, and the accuracy and operation of the design are verified through Integrated Logic Analyzer(ILA). As a result of the experiment, it is confirmed that the designed RISC-V core performs the expected operation, and these results can contribute to the design and verification of RISC-V based systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.289-292
• /
• 2008

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of OpenRISC processor and a clock gating algorithm using ODC (Observability Don't Care) operation for a low-power processor. The branch prediction algorithm has a structure using BTB(Branch Target Buffer) and 4-way set associative cache has lower miss rate than direct-mapped cache. The clock gating algorithm reduces dynamic power consumption. As a result of estimation of performance and dynamic power, the performance of the OpenRISC processor using the proposed algorithm is improved about 8.9% and dynamic power of the processor using samsung $0.18{\mu}m$ technology library is reduced by 13.9%.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.78-84
• /
• 2012

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of an embedded RISC core and a clock-gating algorithm with observability don’t care (ODC) operation to reduce the power consumption of the core. The branch prediction algorithm has a structure using a branch target buffer (BTB) and 4-way set associative cache that has a lower miss rate than a direct-mapped cache. Pseudo-least recently used (LRU) policy is used for reducing the number of LRU bits. The clock-gating algorithm reduces dynamic power consumption. As a result of estimation of the performance and the dynamic power, the performance of the OpenRISC core applied to the proposed architecture is improved about 29% and the dynamic power of the core with the Chartered 0.18 ${\mu}m$ technology library is reduced by 16%.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1172-1175
• /
• 2020

Automotive ECU integrates CPU core, IVN controller, memory interface, sensor interface, I/O interface, and so on. Current automotive ECUs are often developed with proprietary processor architectures. However, demends for standard processors such as ARM and RISC-V increase rapidly for saftware compatibility in autonomous vehicles and connected cars. In this paper, an automotive ECU is designed for parking assist system based on RISC-V with open instruction set architecture. It includes 32b RISC-V CPU core, IVN controllers such as CAN and LIN, memory interfaces such as ROM and SRAM, and I/O interfaces such as SPI, UART, and I2C. Fabricated in 65nm CMOS technology, its operating frequency, area, and gate count are 50MHz, 0.37㎟, and 55,310 gates, respectively.