• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.521-536
• /
• 2019

Using magnetorheological (MR) dampers in multiswitch open-loop control mode has been shown to be cost-effective for cable vibration mitigation. In this paper, a method for analyzing the damping performance of taut cables incorporating MR dampers in open-loop control mode is developed considering the effects of damping coefficient, damper stiffness, damper mass, and stiffness of the damper support. Making use of a three-element model of MR dampers and complex modal analysis, both numerical and asymptotic solutions are obtained. An analytical expression is obtained from the asymptotic solution to evaluate the equivalent damping ratio of the cable-damper system in the open-loop control mode. The individual and combined effects of the damping coefficient, damper stiffness, damper mass and stiffness of damper support on vibration control effectiveness are investigated in detail. The main thrust of the present study is to derive a general formula explicitly relating the normalized system damping ratio and the normalized damper parameters in consideration of all concerned effects, which can be easily used for the design of MR dampers to achieve optimal open-loop vibration control of taut cables.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.553-564
• /
• 2019

Modeling of magnetorheological (MR) dampers for cable vibration control to facilitate the design of even more effective and economical systems is still a challenging task. In this study, a parameter-adaptive three-element model is first established for a full-scale MR damper based on laboratory tests. The parameters of the model are represented by a set of empirical formulae in terms of displacement amplitude, voltage input, and excitation frequency. The model is then incorporated into the governing equation of cable-damper system for investigation of open-loop vibration control of stay cables in a cable-stayed bridge. The concept of optimal voltage/current input achieving the maximum damping for the system is put forward and verified. Multi-mode suboptimal and Single-mode optimal open-loop control method is then developed. Important conclusions are drawn on application issues and unique characteristics of open-loop cable vibration control using MR dampers.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.23-28
• /
• 2002

• 전기학회논문지
• /
• 제66권1호
• /
• pp.100-106
• /
• 2017

In this paper, we propose a parallel optimization method of Aho-Corasick (AC) algorithm and Parallel Failureless Aho-Corasick (PFAC) algorithm using Open Computing Language (OpenCL) on Field Programmable Gate Array (FPGA). The low throughput of string matching engine causes the performance degradation of network process. Recently, many researchers have studied the string matching engine using parallel computing. FPGA's vendors offer a parallel computing platform using OpenCL. In this paper, we apply the AC and PFAC algorithm on DE1-SoC board with Cyclone V FPGA, where the optimization that considers FPGA architecture is performed. Experiments are performed considering global id, local id, local memory, and loop unrolling optimizations using PFAC algorithm. The performance improvement using loop unrolling is 129 times greater than AC algorithm that not adopt loop unrolling. The performance improvements using loop unrolling are 1.1, 0.2, and 1.5 times greater than those using global id, local id, and local memory optimizations mentioned above.

• 한국통신학회논문지
• /
• 제29권4A호
• /
• pp.439-446
• /
• 2004

본 논문에서는 통신 시스템의 저전력, 고속 동작에 적합한 2단 8비트 500Msamples/s ADC 설계 기법을 제안하였다. 이를 위하여 기존의 2단 변환기에서 사용하는 폐쇄형 구조 대신 개방형 구조를 사용하였고 리셋 스위치를 사용하여 mux-array를 이용한 개방형 구조에서 문제가 되는 기생 캐패시턴스에 의한 정착 시간 지연 문제를 해결하여 고속 동작에 적합하도록 하였다. 또한 아날로그 래치를 제안하여 기존의 정적 동작 대신 동적 동작을 통하여 전력 소모를 줄였다. 위에서 제안한 설계 기법을 이용하여 설계된 ADC는 모의실험 결과 103MHz 입력 신호를 500MHz로 샘플링 할 때 7.6비트의 ENOB을 가지며 1.8V 단일 전원에서 203㎽의 전력을 소모한다. 레이아웃은 1-poly 6-metal 0.18$\mu\textrm{m}$ CMOS 공정을 이용하였으며 면적은 760$\mu\textrm{m}$*800$\mu\textrm{m}$이다.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.207-212
• /
• 2015

The use of groundwater and ground_heat is one of the ways to use natural and renewable energy, and it has been considered as a technology to reduce greenhouse gas emissions and increase energy-saving. There are a few researches on the optimum design for the open-loop geothermal system. In this study, to develop the optimal design method numerical simulation of the open-loop geothermal system with two-wells was performed by a groundwater and heat transfer model. In this paper, a study was performed to analyze the system performance according to well distance and pumping flow rate. In the result, average heat exchange rate and heat source temperature were calculated and it was found that they were dependent on the pumping rate.

• ETRI Journal
• /
• 제19권3호
• /
• pp.98-115
• /
• 1997

The architecture of the CDMA mobile system (CMS) is developed based on three function groups - service resource, service control, and service management groups. In this paper, the CMS architecture is discussed from the point of view of implementing these functions. The variable length packets are used for transmission. The synchronization clock signals are derived form the GPS receiver. The open loop and closed loop techniques are used for the power control. The internationally accepted signaling and network protocols are employed. The call control for the primary services in designed to provide efficient mobile telecommunication services. The softer handoff is implemented in one card. The mobile assisted handoff and the network assisted handoff are employed in the soft and hard handoffs. The authentication is based on the secret data which includes random numbers. The management functions, which include the location management, resource management, cell boundary management and OAM management, are implemented to warrant the system efficiency, maximum capacity and high reliability. The architecture ensures that the CMS is flexible and expandable to provide subscribers with economic and efficient system configuration. The dynamic power control, adaptive channel allocation. and dynamic cell boundary management are recommended for future work.

• 한국통신학회논문지
• /
• 제30권1A호
• /
• pp.104-112
• /
• 2005

본 논문에서는 고속, 저전력 8-비트 ADC를 설계하는 기법들을 제안하였다. 비교적 적은 전력 소모를 가지면서 고속으로 동작 시키기 위해 기존의 파이프라인 구조인 MDAC를 이용한 폐쇄형 구조 대신에 개방형 구조를 채택하였다. 또한 Distributed THA와 캐스캐이드 형태의 구조를 이용하여 높은 샘플링 속도에 최적화 하였다. 제안한 각 단의 크로싱 지점을 판별하는 기법은 증폭기의 개수를 줄일 수 있도록 함으로서 저전력과 좁은 면적의 ADC 구현을 가능하게 하였다. 모의 실험 결과 500-MHz의 샘플링 속도와 1.8V 전원 전압에서 테스트에 필요한 디지털 회로까지 포함, 210mW의 전력을 소비함을 확인 할 수 있었다. 또한 1.2Vpp(Differential) 입력 범위와 200-MHz까지의 입력 주파수에서 8-비트에 가까운 ENOB를 가짐을 볼 수 있었다. 설계된 ADC는 $0.18{\mu}m$ 6-Metal 1-Poly CMOS 공정을 이용, $900{\mu}m{\times}500{\mu}m$의 면적을 차지한다.

• 방송공학회논문지
• /
• 제16권6호
• /
• pp.1009-1017
• /
• 2011

실시간 홀로그래피 방송을 제작하기 위해서는 디지털 홀로그램을 고속으로 생성하는 것이 중요하다. 본 논문에서는 디지털 홀로그램 생성을 위한 Computer-Generated Holography(CGH) 식의 병렬 구조를 최적화하고, Compute Unified Device Architecture(CUDA)와 Open Multi-Processing (OpenMP) 를 이용한 Multi Graphic Processing Unit(Multi-GPU) 기반의 디지털 홀로그램의 고속 생성을 위한 최적화 기법을 제안한다. 디지털 홀로그램을 생성하는 과정은 독립적인 연산을 할 수 있는 다수의 개체로 병렬화 할 수 있는 구조이기 때문에 이에 특화된 CUDA와 OpenMP를 사용함으로써 CGH식을 고속으로 연산할 수 있다. 여기서 더 나아가 이를 최적화하기 위해서 상수화, 벡터화, 루프풀기 등의 방법을 제안한다. 본 논문에서 제안된 기법을 통해서 기존 CPU에서의 CGH 연산속도에 비해 약 9,700배 정도의 속도를 개선할 수 있었다.

• Advances in concrete construction
• /
• 제12권5호
• /
• pp.399-409
• /
• 2021

The existing method to improve the coordination performance of the inner and outer parts of concrete-encased concrete-filled steel tube (CFST) composite columns by increasing the volume-stirrup ratio causes difficulties in construction due to over-dense stirrups. Thus, this paper proposes an open polygonal composite stirrup with high strength and high ductility CRB600H reinforced rebar, and seventeen specimens were constructed, and their axial compressive performance was tested. The main parameters considered were the volume-stirrup ratio, the steel tube size, the stirrup type and the stirrup strength. The test results indicated: For the specimens restrained by open octagonal composite stirrups, compared with the specimen of 0.5% volume-stirrup ratio, the compressive bearing capacity increased by 14.6%, 15.7% and 21.5% for volume-stirrup ratio of 0.73%, 1.07% and 1.61%, respectively. For the specimens restrained by open composite rectangle stirrups, compared with the specimen of 0.79% volume-stirrup ratio, the compressive bearing capacity increased by 7.5%, 6.1%, and -1.4% for volume-stirrup ratio of 1.12%, 1.58% and 2.24%, respectively. The restraint ability and the bearing capacity of the octagonal composite stirrup are better than other stirrup types. The specimens equipped with open polygonal composite stirrup not only had a higher ductility than those with the traditional closed-loop stirrup, but they also had a higher axial bearing capacity than those with an HPB300 strength grades stirrup. Therefore, the open composite stirrup can be used in practical engineering. A new calculation method was proposed based on the stress-strain models for confined concrete under different restrain conditions, and the predicted value was close to the experimental value.