• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.140-146
• /
• 2002

The tulip-inversion of flames in half-open tubes was investigated experimentally. Experiments was carried out in tubes with various shapes. The image of a flame propagation were pictured by HICCD(High speed intensified CCD) and the dynamic pressure of tubes was measured by a piezo pressure sensor. By analyzing the images of the flame propagation, we found the time and the distance for the occurrence of tulip-inversion. Regardless of the shapes of tubes, time of tulip-inversion are similar and inversely proportional to the burning velocity. But distances have different tendency. In a straight tube, the distance of tulip-inversion increases when the burning velocity increases. But in a converging tube, the distance of tulip-inversion decreases when a burning velocity increases. And the distance of tulip-inversion in a converging tube is much smaller than the distance of tulip-inversion in a straight tube. These results are caused by the deceleration of a flame when the diameter of a hole in open-side of a tube is small. The deceleration causes little effect on the time of tulip-inversion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.754-755
• /
• 2015

Computer Vision Syndrome(CVS) is a temporary condition resulting from focusing the eyes on a computer display for protracted, uninterrupted periods of time. To prevent CVS, you have to blink your eyes frequently, also have to keep distances from monitor. In this paper, real-time notification system for preventing CVS by checking user's distance between eyes and monitor and user's frequency of nictation in real time through monitor webcam is described.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.637-642
• /
• 1997

Degradation of a compound with a hydroxyl group during the course of its diffusion across the skin was investigated. Based on the experimental findings of ashortened retention time of a degradant peak from post-diffusion samples and from the ability to evaporate radioactivity from such samples, it seems that during diffusion the parent compound degrades into a more hydrophilic product which is then oxidized. A tritium label at the carbon with a hydroxyl group was released as a tritiated water. When the post-diffusion samples were left open to the air allowing evaporation of water, there was a corresponding decrease in radioactivity of such samples. There was a linear relationship between the time left open and the fraction of radioactivity lost. When such samples were fractionated by HPLC, and then had their radioactivities measured by scintillation counting, two peaks wre identified. The first peak, which may be attributable to tritiated water, was eluted at the same retention time as the solvent front. The second peak eluted at the retention time of the parent compound. When the evaporation/loss of radioactivity experiment was repeated using a $^{14}C$-labeled compound there was no significant loss of radioactivity, indicating that the earlier loss with $^{3}H$-labeled compound was related to the formation and loas sof tritiated water.

• Fourth Industrial Review
• /
• v.3 no.1
• /
• pp.13-20
• /
• 2023

Purpose - By designing a PEF(Personalized Education Feedback) system for real-time prediction of learning achievement and motivation through real-time EEG analysis of learners, this system provides some modules of a personalized adaptive learning system. By applying these modules to e-learning and offline learning, they motivate learners and improve the quality of learning progress and effective learning outcomes can be achieved for immersive self-directed learning Research design, data, and methodology - EEG data were collected simultaneously as the English test was given to the experimenters, and the correlation between the correct answer result and the EEG data was learned with a machine learning algorithm and the predictive model was evaluated.. Result - In model performance evaluation, both artificial neural networks(ANNs) and support vector machines(SVMs) showed high accuracy of more than 91%. Conclusion - This research provides some modules of personalized adaptive learning systems that can more efficiently complete by designing a PEF system for real-time learning achievement prediction and learning motivation through an adaptive learning system based on real-time EEG analysis of learners. The implication of this initial research is to verify hypothetical situations for the development of an adaptive learning system through EEG analysis-based learning achievement prediction.

• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.66-75
• /
• 2023

Hydrological survey measurement technology has improved due to the introduction of high-tech equipment and advances in technology, but hydrological survey still requires a lot of manpower and time, and the manpower invested is very limited compared to the size and scope of work. In addition, although automatic flow measurement facilities are in operation, it is difficult to expand them nationwide due to limited field conditions. Therefore, it is necessary to improve the operating infrastructure and environment rather than the measurement technology itself for hydrological investigation. In addition, in terms of flow investigation, it is necessary to schedule an investigation using real-time water level information in order to inventory the accuracy of the water-flow relationship equation and improve work efficiency. Therefore, in this paper, research related to domestic hydrological surveys was analyzed and a hydrological survey scheduling system using real- time water level information based on Open API was implemented to increase the economic and efficiency of hydrological surveys.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.541-550
• /
• 2021

While open-air compost has value as a source of nutrients for crops in agricultural land, it acts as a pollution that adversely affects the environment during rainfall, and management is required. In this study, it was intended to analyze the accuracy of calculating open-air compost volume using fixed-wing UAV (unmanned aerial vehicle) capable of acquiring a wide range of images and automatic path flights and to identify the possibility of utilization. In order to evaluate the accuracy of calculating the three open-air compost volume, ground LiDAR surveys and precision surveys using a rotary UAV were performed. and compared with the open-air compost volume acquired through a fixed-wing UAV. As a result of comparing the calculation of open-air compost volume based on the ground LiDAR, the error rate of the rotary-wing was estimated to be ±5%, and the error rate of fixed-wing was -15 ~ -4%. one of three open-air compost volume calculated by fixed-wing was underestimated as about -15 %, but the deviation of the open-air compost volume was 2.9 m3, which was not significant. In addition, as a result of periodic monitoring of open-air compost using fixed-wing UAV, changes in the volume of open-air compost with time could be confirmed. These results suggested that efficient open-air compost monitoring and non-point pollutants in agricultural for a wide range using fixed-wing UAV is possible.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.191-196
• /
• 2019

The development of open-pit mines leads to large-area topographical changes in highland forests and can lead to severe deterioration of forests, requiring continuous monitoring. The drone photogrammetry is performed at a lower altitude than the existing manned aerial photogrammetry, and thus has a relatively high accuracy. The purpose of this study is to construct spatial information of large open pit mine using drone photogrammetry and to evaluate the accuracy and utilization of the results. The accuracy of the drone photogrammetric results was 0.018 ~ 0.063m in the horizontal direction and 0.027m ~ 0.088m in the vertical direction. These results satisfy the permissible accuracy of 1: 1,000 digital topographic map and it can be used for open mine monitoring. The geospatial information of the open pit mine can be used in various ways, and it can be used to monitor the quantitative change of a specific area for time series change through data management by periodic data acquisition. If drone photogrammetry is applied to open-pit mine monitoring in the future, work time and cost can be greatly reduced compared to the conventional GNSS or total station method, and the work efficiency can be greatly improved because more visible data can be generated.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.745-754
• /
• 2019

As GeoWeb 2.0 technologies are widely used, various kinds of services that mashup spatial data and user data are being developed. In particular, various spatial information platforms such as Google Maps, OpenStreetMap, Daum Map, Naver Map, olleh Map, and VWorld based on GeoWeb 2.0 technologies support mashup service. The mashup service which is supported through the Open APIs of the platforms, provides various kinds of spatial data such as 2D map, 3D map, and aerial image. Also, application fields using the mashup service are greatly expanded. Recently, as user data for mashup have been greatly increased, there was a problem in mashup performance. However, the research on the mashup performance improvement is currently insufficient, even the research on the mashup performance comparison of various platforms has not been performed. In this paper, we perform comparative analysis of the mashup performance for large amounts of user data and spatial data using various spatial information platforms available in Korea. Specifically, we propose two performance analysis indexes of mashup time and user interaction time in order to analyze the mashup performance efficiently. Also, we implement a system for the performance analysis. Finally, from the performance analysis result, we propose a spatial information platform that can be efficiently applied to cases when user data increases greatly and user interaction occurs frequently.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.816-824
• /
• 2003

In this study, variations of cutting performance with pulse time, open circuit voltage, wire speed and dielectric fluid pressure were experimentally investigated in Wire Electrical Discharge Machining (WEDM) process. Brass wire with 0.25 mm diameter and AISI 4140 steel with 10 mm thickness were used as tool and work materials in the experiments. The cutting performance outputs considered in this study were surface roughness and cutting speed. It is found experimentally that increasing pulse time, open circuit voltage, wire speed and dielectric fluid pressure increase the surface roughness and cutting speed. The variation of cutting speed and surface roughness with cutting parameters is modeled by using a regression analysis method. Then, for WEDM with multi-cutting performance outputs, an optimization work is performed using this mathematical models. In addition, the importance of the cutting parameters on the cutting performance outputs is determined by using the variance analysis (ANOVA).

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.236-240
• /
• 2004

In this paper we examine the reflection characteristics of dielectric microstrip lines with open-ended termination containing an optically induced plasma region, which are analyzed by the assumption that the plasma is distributed homogeneously in laser illumination. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. To estimate theoretically the characteristic response of identical systems in the time domain, the Fourier transformation method is evaluated. The reflection characteristics of time and frequency response in microwave systems have been calculated using an equivalent circuit model.