• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.533-546
• /
• 2023

Cost-effective solutions provided by composite construction are gaining popularity which, in turn, promotes the appearance on the market of new types of composite sections that allow not only to take advantage of the synergy of steel and concrete working together at room temperature, but also to improve their behaviour at high temperatures. When combined with high performance materials, significant load-bearing capacities can be achieved even with reduced cross-sectional dimensions. Steel-reinforced concrete-filled steel tubular (SR-CFST) columns are one of these innovative composite sections, where an open steel profile is embedded into a CFST section. Besides the renowned benefits of these typologies at room temperature, the fire protection offered by the surrounding concrete to the inner steel profile, gives them an enhanced fire performance which delays its loss of mechanical capacity in a fire scenario. The experimental evidence on the fire behaviour of SR-CFST columns is still scarce, particularly when combined with high performance materials. However, it is being much needed for the development of specific design provisions that consider the use of the inner steel profile in CFST columns. In this work, a new experimental program on the thermo-mechanical behaviour of SR-CFST columns is presented to extend the available experimental database. Ten SR-CFST stub columns, with circular and square geometries, combining high strength steel and concrete were tested. It was seen that the circular specimens reached higher failure times than the square columns, with the failure time increasing both when high strength steel was used at the embedded steel profile and high strength concrete was used as infill. Finally, different proposals for the reduction coefficients of high performance materials were assessed in the prediction of the cross-sectional fire resistance of the SR-CFST columns.

• ETRI Journal
• /
• 제35권1호
• /
• pp.1-6
• /
• 2013

In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.88-91
• /
• 2000

An MMIC oscillator operating at the 24.55 GHz has been designed using 0.2 ${\mu}{\textrm}{m}$AlGaAs/InGaAs/GaAs Pseudomorphic HEMT technology. The active device used in the oscillator design has a 0.2 ${\mu}{\textrm}{m}$ gate length PHEMT with 4$\times$80 ${\mu}{\textrm}{m}$ gate width. We obtained 4.08 dB of S$_{21}$ gain and 317 mS/mm of transconductance, and extrapolated unit current gain cut-off frequency (f$_{T}$) and maximum oscillation frequency (fmax) were 62 GHz and 120 GHz, respectively. The circuit are based on a series feedback and negative resistance topology. Microstrip line open stub is used to terminating. The oscillator circuits has designed for delivering maximum power to load and conjugated matching. The simulated small signal negative resistance was 50 Ω. We obtained 1.002 of loop gain and 0.0005$^{\circ}$angle from the simulation by HP libra 6.1. The layout for oscillator is 1.2$\times$1.8 $\textrm{mm}^2$.>.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.153-160
• /
• 2005

In this paper, the novel microwave oscillator incorporating a planar cavity resonator(PCR) is presented to reduce the phase noise of the oscillator in a planar environment. Compared to the conventional planar( $\lambda$/4 open stub resonator), the phase noise is improved about 16 dBc/Hz @100 kHz. The design of the oscillator is based on a reflection type configuration using the low 1/f SiGe HBT transistor(LPT16ED). The output power is measured 2.76 dBm at 12.5 GHz. In this paper, the oscillator used to the PCR can be expected to provide a solution for low phase noise oscillator in microwave circuits.

• 한국항해항만학회지
• /
• 제30권7호
• /
• pp.607-610
• /
• 2006

A new compact microstrip low-pass filter and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.79-84
• /
• 2006

A novel design of compact low-pass filter based on microstrip structure and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.225-228
• /
• 2000

In this paper, the design for a low noise amplifier with the EM simulation is presented. The ATF36077 pHEMT device is applied to design LNA for U-NII frequency band (5 GHz ～ 6 GHz). The matching networks have been designed by the only open ended stub in order to reduce parasitic effects generated from a via structure. Through EM simulator, the simulation result shows that the linear gain (@5.5 GHz) is over 10 dB, input return loss and output return loss (@ 5.5 GHz) are a below 10 dB respectively, and the 3rd order intercept point is about 17 dBm.

• 한국항행학회논문지
• /
• 제20권4호
• /
• pp.361-366
• /
• 2016

본 논문은 S-파라미터를 어드미턴스 파라미터로 변환하는 것을 바탕으로 비대칭 분배되면서 동시에 임의의 임피던스로 변환시킬 수 있는 임피던스 변환기를 나타내었다. 회로 해석 방법을 우수/ 기수 모드 방법과 비교하면 본 논문의 파라미터 변환을 통한 방법은 위상 지연 정보와 임의의 포트 임피던스 값을 포함시키고 그리고 비대칭 구조등을 해석하는데 간단함을 알 수 있다. 이 설계 방법의 타당성을 확인하기 위해서 중심주파수 1 GHz에서 3:1의 비대칭 분배비율을 갖고 있고 $50{\Omega}$을 $12.5{\Omega}$ 비율로 변환되는 임피던스 변환기를 설계하였다. 임피던스 변환기를 구현하는 방법은 유도된 수식으로부터 계산된 작은 임피던스 선로를 병렬 오픈스터브가 연결된 전송선로를 사용하여 구현하였고, 이것의 실험 결과는 시뮬레이션 결과와 동일하게 나옴을 확인하였다.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.115-130
• /
• 2017

A new type of moment-resisting bolted connection was developed for use in composite steel- concrete construction to connect composite open section steel beams to concrete filled steel square tubular columns. The connection was made possible using anchored blind bolts along with two through bolts. It was designed to act compositely with the in-situ reinforced concrete slab to achieve an enhanced stiffness and strength. The developed connection was incorporated in the design of a medium rise (five storey) commercial building which was located in low to medium seismicity regions. The lateral load resisting system for the design building consisted of moment resisting frames in two directions. A major full scale test on a sub-assembly of a perimeter moment-resisting frame of the model building was conducted to study the system behaviour incorporating the proposed connection. The behaviour of the proposed connection and its interaction with the floor slab under cyclic loading representing the earthquake events with return periods of 500 years and 2500 years was investigated. The proposed connection was categorized as semi rigid for unbraced frames based on the classification method presented in Eurocode 3. Furthermore, the proposed connection, composite with the floor slab, successfully provided adequate lateral load resistance for the model building.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.411-415
• /
• 2003

본 논문에서는 고주파 특성이 우수한 NEC사의 ne71300-N MESFET를 이용하여 24GHz 대역 국부 발진기용 주파수 체배기를 설계 및 제작하였다. 멀티하모닉 로드 풀 시뮬레이션을 통하여 최적의 고조파 소스ㆍ부하 임피던스를 선택하였다. 리플렉터를 이용하여 변환 이득을 개선할 수 있었고, 대역 저지필터를 이용하여 기본파와 3차 고조파 성분을 억제하였다. 측정한 결과 0dBm의 입력신호에ㆍ대해 출력주파수인 24GHz에서의 출력 전력은 -3.776dBm이고, 변환 이득은 0.736dB, 41.064dBc의 고조파 억압 특성을 얻었다.