• Wind and Structures
• /
• v.23 no.2
• /
• pp.91-107
• /
• 2016

Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.

• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.45-64
• /
• 2020

In the rapidly changing business environments, Internet companies have the characteristics of organizational culture that emphasize the flexible, open and autonomous nature of organizational culture, and are transforming into flexible smart working environment that is independent of time and place. Despite such an Internet business environment, the security management system still fails to reflect the business environment and organizational culture of the Internet company, and the control-focused security management system in the Internet company is facing limitations. Therefore, this study designed and developed Corporate members' autonomy-centered security items that considering the characteristics of the business environment and organizational culture of the Internet company. The results of this study are expected to be used to implement and operate corporate members' autonomy-centered security management system in internet companies with an agile business environment and an autonomous organizational culture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.15-21
• /
• 2015

In order to secure the compatibility of eBook viewers based on EPUB 3.0, IDPF launched an open project of Readium in February 2012, which supports the standard platform for eBook viewers and the related SDK that can be implemented on different OSs. The current EPUB standard, however, does not provide DRM standards to protect eBook copyrights. Therefore, the compatibility of Readium SDK cannot be secured. Even though the Readium project has tried to design a standard reference software in order to apply DRM independently of EPUB standards, it still does not definitely solve compatibility problems of plural DRMs. This paper suggests a compatibility model based on Readium SDK and ContentMudule technology, in which eBook viewers can work together with plural DRM technology.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.63-69
• /
• 2020

The rapid development in modern industrialization pollutant the water and atmospheric air across the globe that have a major impact on the human and livings health. In worldwide, every country government increasing the importance to improve the outdoor air pollution monitoring and control to provide quality of life and prevent the citizens and livings life from hazard disease. We proposed the environmental dust level detection method for outdoor facilities using sensor fusion technology to measure precise micro-dust level and monitor in realtime. In this proposed approach use the camera sensor and commercial dust level sensor data to predict the micro-dust level with data fusion method. The camera sensor based dust level detection uses the optical flow based machine learning method to detect the dust level and then fused with commercial dust level sensor data to predict the precise micro-dust level of the outdoor facilities and send the dust level informations to the outdoor air pollution monitoring system. The proposed method implemented on raspberry pi based open-source hardware with Internet-of-Things (IoT) framework and evaluated the performance of the system in realtime. The experimental results confirm that the proposed micro-dust level detection is precise and reliable in sensing the air dust and pollution, which helps to indicate the change in the air pollution more precisely than the commercial sensor based method in some extent.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.83-91
• /
• 2011

The purpose of this thesis was to implement effective blended PBL(Problem-Based Learning) systems for information communication ethics education. Online learning and face-to-face classes were systematically combined for achieving the teaching-learning goals. And the main module for online learning run on Moodle, an open source learning management system. To examine educational effectiveness of the proposed systems, an experimental study was conducted through the method to the subject of two class in the second-grade of university located in ${\bigcirc}{\bigcirc}$ city. For experiment 60 students(treatment group=30, control group=30) are participated. And they were assigned to one of ten subgroups, comprising of six students, respectively. The results of this study are follows, First, the education using proposed blended PBL method is more effective in cultivating consciousness of information communication ethics than the education using face-to-face PBL learning method. Second, learners who participated in the proposed blended PBL more experienced various effects of PBL, such as (1) Improvement of problem solving ability, (2) Understanding of cooperative learning than the other learners who participated in the face-to-face PBL.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.3
• /
• pp.132-137
• /
• 2016

Objective: Eversion of the foot is created with internal rotation of the shank, and inversion of the foot is created with external rotation of the shank. The purpose of the study was to investigate the effect of continuous changes in the angle of the subtalar joint on lower extremity alignments. Design: Cross-sectional study. Methods: Seventeen healthy young adult subjects recruited. The subjects were asked to stand up in a natural standing position on a footplate with eye open and equal weight on each foot for 10s in two different conditions: The right subtalar joint was everted continuously $0^{\circ}-20^{\circ}$ and in separate segments of $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$. The averages of three trials were used. The observation of the changes in the lower extremity was performed with the use of 3-dimensional motion analysis. For data analysis, the SPSS 18.0 software using paired t-test and repeated measures analysis of variance (ANOVA) was applied. Results: The angle was significantly increased at the horizontal rotation angle of the shank, thigh, and ankle without anterior rotation of the pelvis (p<0.05). The maximum horizontal rotation angle at the thigh on $20^{\circ}$ was $-4.52^{\circ}$ in static, and $-3.10^{\circ}$ in the dynamic conditions compared to $0^{\circ}$. Conclusions: Increased unilateral foot pronation, thigh, shank, ankle horizontal rotation variance was significantly effective. The observation of the changes in foot abduction with the use of a 3-dimensional motion analysis augmented in predicting the angle values of each segment of the lower extremity. In further studies, a comparison of the right and left subtalar joints need to be investigated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.307-320
• /
• 2009

This study was conducted not only to review airborne asbestos levels reported in workplaces in Korea, but also to analyze their levels according to various characteristics All asbestos concentration reported as either geometric mean (GM) and geometric standard deviation (GSD) or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means (WAMs) were calculated to weigh asbestos levels based on the different number of samples. Differences of asbestos levels among several characteristics such as industry type, decade, operation and sampling and analytical methods were analyzed using analysis of variance (ANOVA). The number of articles studying asbestos levels from workplaces was found to be 9 including two report types. Five of those were reported prior to 1990s and rest of them after 1990s. Only several industries such as asbestos textile, asbestos cement, brake-lining repair shops were studied, while various industries using asbestos or asbestos containing materials (ACMs) were not studied. ANOVA found that asbestos exposure levels (WAM = 5.26f/cc) reported from textile industry were significantly higher than those from other industries (cement = 0.63f/cc, brake-lining = 0.2f/cc - 0.47f/cc) (p < 0.0001). Average exposure levels studied prior to the 1990s (3.13f/cc) were found to be significantly higher than that (0.86f/cc) after the 1990s (p<0.0001). All WAMs reported until the 1994 were found to be higher than the current occupational exposure limits (0.1f/cc). This study recommends that retrospective exposure to asbestos based on various industry types and operations should be assessed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.31-36
• /
• 2006

Tritium has been used to directly measure the exchangeable hydrogen in bleached softwood kraft pulp. The hydrogen atoms associated with hydroxyl groups in pulp or with water contained in the pulp can dissociate and exchange with the hydrogen atoms in bulk water. Tritium is a radioactive isotope of hydrogen and behaves almost identically to it. The distribution of tritium between pulp and water ($k_{pw}$) can be easily measured and becomes an index of the protons available fur hydrogen bonding. Bleached kraft pulp was refined in a PFI mill to a range of freenesses. Tritiated water was added and the amount exchanged measured. There was a slight steady increase in $k_{pw}$ until approximately 300 CSF; $k_{pw}$ then rose sharply between 300 CSF and 100 CSF. This rise appears to correlate with FSP. It is likely that the action of refining on the fiber reaches a threshold at about 300 CSF causing the fiber surface to break open creating exponentially more surface area. This theory is visually confirmed through light microscopy. The slow increase in fibrillation of the fibers above 300 CSF correlates with the increase in $k_{pw}$. Beyond the threshold of 300 CSF a dramatic difference in fibrillation is shown, also corresponding with the large increase in $k_{pw}$. The freeness difference around 300 CSF is small, but the change in fiber properties is extreme within this region. This change in properties could lead to sheet breaks and other disruptions when producing products around the threshold. This study leads to a better understanding of how fiber changes during refining, resulting in a practical benefit of target freeness determination. Presently, freeness is selected based on product quality and on some measure of runnability. Yet, there are other considerations, demonstrated by the extreme change in fiber properties around 300 CSF.

• Journal of architectural history
• /
• v.16 no.4
• /
• pp.7-22
• /
• 2007

In San Francisco, two new museums were recently built in 1995 and 2005. The one is San Francisco Museum of Modern Art designed by Mario Botta and the other is De Young Museum designed by Jacques Herzog & Pierre de Meuron. The urban settings for the museums are compared with each other and theories of the architects are evolved on different branches in the modernist trends. The theories and settings are followed by the representation in the forms, facades, interior spaces and towers. SFMOMA is located on the SoMa area, which was recently developed into a cultural urban core with Moscone Center and Buena Yerba Garden. De Young Museum was rebuilt in the old museum site in the Golden Gate Park. The one is on the context of urban artefacts and the other on the context of natural artefacts. To Botta, the museum in today's city plays a role analogous to that of the cathedral of yesterday. It is a place of common encounter and confrontation. The volume of SFMOMA which is geometrical and symmetric with double pylons. The frontality on the street and public green open space and the axiality of SFMOMA runs through the Buena Yerba Garden over Buena Yerba Center for the Arts are reminded us of an urban core with a religious monument and a city square. The staircase with grandiose design in the atrium seems to work as an altar with lighting from skylight above enhancing the liturgical ambiance. De Young Museum is shaped in a rectangle with long narrow courtyards. Three bands of volumes are juxtaposed and the nature flows into the museum corridors and galleries. The tower is distorted so as to be aligned to the street grids of the surrounding area. The copper panel of De Young Museum and natural context evoke modern concept of "machine in the garden". The two museums from different pedigrees of Modern Architecture are now major landmarks of SF and urban expressions for the 21st century.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.29-35
• /
• 2018

A food waste disposer commonly used in restaurants or homes is a type of machine with an agitator attached. The food waste disposer of the crushing type has a problem that the agitator may be broken if the piping or decomposition filter is blocked. In addition, there is an inconvenience that the user must manually open the cover to check the level in the food waste disposer. To solve these problems, this paper proposes a device that combines basic IoT technology with food waste disposer. The proposed device additionally designs and implement a real-time monitor processor and an automatic control processor inside the existing food waste disposer. The proposed food waste disposer allows the user to monitor the inside of the device using the smartphone. In addition, when the food is filled up to a certain position in the food waste disposer, it automatically stops and alarms. Using the proposed system, the user can conveniently check the inside of the food waste disposer, which has the advantage of preventing malfunctions in advance and reducing the probability of malfunction.