• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.719-726
• /
• 2015

This paper presents a velocity-synchronizing control for the multiple axes of an injection unit; based on MBS, a virtual design model has been developed for the multiple-axes servomechanism. Prior to the design of the controller, a linear plant model was derived via open-loop response simulations. To synchronize the motions of the multiple axes, a cross-type synchronizing controller was designed and combined with the PID control to accommodate any parameter mismatches among the multiple axes. From the tracking control simulations, a significant reduction of both velocity-tracking and position-tracking errors was achieved through the use of the proposed control scheme.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1683-1689
• /
• 2017

Wheelsets are an important component affecting the dynamic characteristics of railway vehicles. Research on wheelsets has been conducted for a long time. It is possible to generate the restoring force by the individual torque control of the left and right wheels in the independently rotating wheelsets (IRWs). Although this method solves the problems of conventional wheelsets, such as the solid axle wheelsets, the restoring force control must be added to the existing traction force control, and the restoring force requires a higher precision and quicker response than the traction force. In this paper, we study the robust control strategy of wireless trams with independently rotating wheelsets. The interior permanent magnet synchronous motor (IPMSM) and the controller with the actual scale wireless tram are designed to verify the torque control performance. Moreover, we propose an open loop control method to test and verify the traction and restoring force control algorithm of the IRWs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.154-156
• /
• 1999

A Linear Stepping Motor(LSM) can operate open loop control mode similarly to a rotary stepping motor. The linear motion without any mechanical linkage in the LSM results in several advantages for precise positioning actuators. However, to realize the more stable and higher speed control without hunting, it is necessary to derive an equivalent circuit to explain the steady-state and transisent characteristics in order to find an adequate control rule for high performance control of the LSM. In this paper, magnetic equivalent circuit is obtained, based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. The 1-step response characteristic of the LSM is analyzed by the ACSL with the voltage equations, the force equations, the force equations and the kinetic equation.

• 한국정보통신학회논문지
• /
• 제13권4호
• /
• pp.636-644
• /
• 2009

본 논문에서는 구형공진기와 SIOS를 사용하여 삽입손실이 작고, 차단특성이 아주 좁고, 광대역 특성을 갖는 마이크로스트립 대역통과필터를 연구하였다. 계단 입피던스 스터브는 일반$0.25{\lambda}$ 스터브 보다 약 30%의 길이를 줄일 수 있고, 또한 스터브의 임피던스의 크기를 변경할 수 있는 장점이 있음으로 필터의 특성 개선에 적용할 수 있다. 본 논문의 객관성을 입증하기 위해서 이중모드 구형공진기를 사용한 최적화된 광대역 대역통과 필터를 구현하였다. 전송선로 모델을 사용하여 계산한 주파수 특성 결과는 실험 값과 아주 잘 일치하였다. 구현된 필터의 주파수 특성은 $L_4$ = 1.94mm인 경우에 필터의 3dB 대역폭은 52.5%(3.267GHz)이고, 삽입 손실은 0.33dB, 30dB 차단특성은 저주파수 대역에서 221MHz, 고주파수대역에서 0.181MHz이다. 최대 차단특성은 저주파 대역에서 -54dB, 고주파 대역에서 -60dB이다.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.200-207
• /
• 2009

본 논문에서는 구형 공진기와 SIOS(Step-Impedance-Open-Stub)를 사용하여 삽입 손실이 적고, 차단 특성이 아주 좁고, 광대역 특성을 갖는 대역 통과 필터를 연구하였다. SIOS는 일반 $0.25\;{\lambda}$ 개방 스터브보다 약 30 %의 길이를 줄일 수 있고, 또한, SIOS의 길이에 따라 임피던스 값을 조정함으로써 필터의 특성 개선에 적용할 수 있다. 본 논문의 객관성을 입증하기 위해서 이중 모드 구형 공진기를 사용한 최적화된 광대역 대역 통과 필터를 구현하였다. 전송 선로 모델을 사용하여 계산한 주파수 특성 결과는 실험값과 아주 잘 일치하였다. 본 논문에서 구현된 필터의 주파수 특성은 필터의 3 dB 대역폭은 51.75 %(3.206 GHz)이고, 삽입 손실은 0.44 dB, 30 dB 차단 특성은 저 주파수 대역에서 221 MHz($4.326{\sim}4.587\;GHz$), 고주파수 대역에서 181 MHz($7.739{\sim}7.954\;GHz$)이다. 최대 차단 특성은 저주파 대역에서 -61.8 dB, 고주파 대역에서 -76.3 dB이다.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.157-165
• /
• 2000

연안 소형 어선의 조업 효율을 향상시키기 위한 연구의 일환으로 소형 유압식 어로윈치시스템을 설계하고, auto tension 기능을 내장시켜 이 시스템의 개루프 상태에 대한 동적 응답 특성을 분석, 고찰한 결과를 요약하면 다음과 같다. 1. 본 연구에서 설계, 제작한 소형 윈치시스템은 갑판상 어느 장소에서도 조작이 가능하도록 원격조작방식을 채용하고 있기 때문에 어로 작업시의 인력 감소와 작업의 효율성을 높일수 있다고 생각된다. 2. 솔레노이드 밸브를 ou/off 조작하여 윈치를 구동할 때, 정전 및 역전 구동 조작에 대한 윈치 드럼의 회전 지연시간(dead time)은 각각 0.09 sec, 0.04 sec이었다. 또한 on/off 레버의 조작을 행한 직후 응답 특성은 약간 불안정하였지만, 짧은 경과 시간을 거쳐 안정되는 추종성능을 나타내었다. 3. 윈치를 auto tension mode로서 구동하는 경우, 윈치의 회전축에 55.9 kgf$.$m 이상의 토오크가 작용하면 윈치는 5.1 rpm의 회전속도로서 줄을 풀어내고, 그 이하의 토오크가 작용하면 11.1 rpm의 회전속도로서 줄을 감아들이는 자동 권양 윈치의 기능을 발휘한다. 4. 윈치의 auto tension mode에 대한 과도 응답에서 부하가 급격히 증가할 때와 감소할 때의 정정 시간은 0.12 sec, 0.2sec이었고, 그 때의 회전속도는 각각 11 rpm, 5.3 rpm이었다. 5. 원격제어조작에 따른 윈치의 토오크 및 회전속도에 대한 추종성능은 정전 구동에 있어서는 0.23 sec, 역전 구동의 경우에 있어서는 0.37 sec 이내로서 비교적 안정된 응답 특성을 나타내었다. 이상의 결과로부터 본 연구에서 설계한 소형 어선용 자동 권양 윈치 시스템은 인력을 절감하고, 부하의 급속한 변화에 대한 추종 성능이 현용 어로시스템에 비하여 매우 우수하기 때문에 해상에서 어로작업시 과부하에 대한 어구의 손상 방지 및 조업 효율의 향상에 크게 기여할 것으로 판단된다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.1-8
• /
• 2019

The HPM (High-speed Power Matching) system is an electro-hydraulic control system. It directly controls the swash plate of the pump by selecting four-loop logic based on joystick signals, pump flow, and pressure signal to improve the efficiency and controllability of construction machines. In the NFC (Negative Flow Control) system, a typical pump control system using conventional open center type MCV, the loss is continuously generated by flow through the center bypass line even when the excavator is not in operation. Also, due to the slow response of the pump that indirectly controls the flow rate using the pressure regulator, peak pressure occurs at the start or stop of the operation. Conversely, the HPM system uses an MCV without center-by-pass flow path and the swash plate of a pump for the HPM is controlled by a high-speed proportional flow control valve. As a result, the HPM system minimizes energy loss in standby state of the excavator and enables peak pressure control through rapid electro-hydraulic control of a pump. In this paper, the concept of the HPM system algorithm is introduced and the hydraulic system efficiency is compared with the NFC system using the excavator SAT (System Analysis Tool).

• Smart Structures and Systems
• /
• 제19권5호
• /
• pp.487-497
• /
• 2017

Semi-active devices use the building's own motion to produce resistive forces and are thus strictly dissipative and require little power. Devices that independently control the binary open/closed valve state can enable novel device hysteresis loops that were not previously possible. However, some device hysteresis loops cannot be obtained without active analog valve control allowing slower, controlled release of stored energy, and is presents an ongoing limitation in obtaining the full range of possibilities offered by these devices. This in silico study develops a proportional-derivative feedback control law using a validated nonlinear device model to track an ideal diamond-shaped force-displacement response profile using active analog valve control. It is validated by comparison to the ideal shape for both sinusoidal and random seismic input motions. Structural application specific spectral analysis compares the performance for the non-linear, actively controlled case to those obtained with an ideal, linear model to validate that the potential performance will be retained when considering realistic nonlinear behaviour and the designed valve control approach. Results show tracking of the device force-displacement loop to within 3-5% of the desired ideal curve. Valve delay, rather than control law design, is the primary limiting factor, and analysis indicates a ratio of valve delay to structural period must be 1/10 or smaller to ensure adequate tracking, relating valve performance to structural period and overall device performance under control. Overall, the results show that active analog feedback control of energy release in these devices can significantly increase the range of resetable, valve-controlled semi-active device performance and hysteresis loops, in turn increasing their performance envelop and application space.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.146-153
• /
• 1996

A SCARA type direct drive robot which can be used in the assembly operation was designed and manufactured. Graphite fiber epoxy composite material was used in the fabrication of the robot arm structure in order to improve the speed of the robot arm with a high damping effect. For model-based control and sensitivity analysis of system parameters, the dynamic model of robot arm and drive servo amplifier parameters such as equivalent gains of PWM driver and velocity gains of servo system were estimated from frequency response tests. The complete dynamic model for overall robot system was used in the simulation of the open-loop control. The simulation results agreed reasonably well to the experimental results. The feedforward control using the dynamic models improved the trajectory tracking performance, decreasing the tracking error by factor of three compared with PID control. This study found that the inverse dynamic model of the robot arm including the drive servo system showed better performances than the case of arm dynamic model only.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.219-233
• /
• 2014

In a companion paper, Pasala and Nagarajaiah analytically and experimentally validate the Adaptive Length Pendulum Smart Tuned Mass Damper (ALP-STMD) on a primary structure (2 story steel structure) whose frequencies are time invariant (Pasala and Nagarajaiah 2012). In this paper, the ALP-STMD effectiveness on a primary structure whose frequencies are time varying is studied experimentally. This study experimentally validates the ability of an ALP-STMD to adequately control a structural system in the presence of real time changes in primary stiffness that are detected by a real time observer based system identification. The experiments implement the newly developed Adaptive Length Pendulum Smart Tuned Mass Damper (ALP-STMD) which was first introduced and developed by Nagarajaiah (2009), Nagarajaiah and Pasala (2010) and Nagarajaiah et al. (2010). The ALP-STMD employs a mass pendulum of variable length which can be tuned in real time to the parameters of the system using sensor feedback. The tuning action is made possible by applying a current to a shape memory alloy wire changing the effective length that supports the damper mass assembly in real time. Once a stiffness change in the structural system is detected by an open loop observer, the ALP-STMD is re-tuned to the modified system parameters which successfully reduce the response of the primary system. Significant performance improvement is illustrated for the stiffness modified system, which undergoes the re-tuning adaptation, when compared to the stiffness modified system without adaptive re-tuning.