• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• 한국광학회지
• /
• 제23권5호
• /
• pp.227-232
• /
• 2012

본 논문에서는 RLD (Reflective Laser Diode)와 FBG (Fiber Bragg Grating)가 하이브리드 집적된 LD (이하 FG-LD)의 정적 및 동적 특성을 해석하기 위하여 대신호 시영역 모델링 방법을 구현하였다. FBG의 유효길이 2.1 mm를 포함한 외부 집적 공진기의 길이가 8 m인 경우에 0.44GHz의 동적 주파수 요동과 6.4 GHz 정도의 동적 주파수 요동 결과를 나타내었다. 또한 10 Gbps NRZ 신호의 아이가 크게 오픈된 상태를 잘 유지함을 확인하였다. FG-LD는 50 km 정도의 길이를 커버하는 10 Gbps 급 단일파장 레이저로서의 효용성이 있을 것으로 기대된다.

• Smart Structures and Systems
• /
• 제12권1호
• /
• pp.23-39
• /
• 2013

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.287-296
• /
• 2019

최근 지자체들이 경쟁하듯이 건설하고 있는 장경간 케이블 보도교(일명 출렁다리)는 공원 시설로 인식되어 제대로 된 검토와 설계 없이 진행되는 경우가 있다. 케이블 보도교는 기존 도로 현수교보다 훨씬 유연한 특성으로 인하여 내풍안정성 확보는 반드시 필요하며, 오히려 더 기존의 도로교보다 다양한 관점에서 상세하게 검토되어야 한다. 이에 본 연구에서는 케이블 보도교의 내풍 특성을 파악하고, 고유진동수를 추정할 수 있는 추정식을 제시하였다. 또한 경간장에 따른 플러터 풍속 추정에 대한 추세선을 제시하여 평판 거더 보도교의 내풍안정성 확보의 어려움과 그 한계를 제시하였다. 그리고 풍동실험을 통해 바닥 데크 그레이팅 적용 비율 변화를 통해 내풍안정성을 만족하는 단면을 제시하였다. 본 연구에서 제시한 방법은 향후 세장 케이블 보도교 계획시 기초 자료로 활용할 수 있을 것으로 판단된다.

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.115-134
• /
• 2007

This study proposes two new approaches for identifying damage patterns in a holed CFRP cross-ply laminate using an embedded fiber Bragg grating (FBG) sensor. It was experimentally confirmed that the reflection spectrum from the embedded FBG sensor was significantly deformed as the damage near the hole (i.e. splits, transverse cracks and delamination) extended. The damage patterns were predicted using forward analysis (a damage analysis and an optical analysis) with strain estimation and the proposed damage-identification method as well as the forward analysis only. Forward analysis with strain estimation provided the most accurate damage-pattern estimation and the highest computational efficiency. Furthermore, the proposed damage identification significantly reduced computation time with the equivalent accuracy compared to the conventional identification procedure, by using damage analysis as the initial estimation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.