• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.415-425
• /
• 2000

An open architecture manufacturing strategy intends to integrate manufacturing components on a single platform so that a particular component can be easily added and/or replaced. Therefore, the control scheme based upon the open architecture concept is hardware-independent. In this paper, a modular and object oriented approach for a PC-based open robot control system is investigated. A standard reference model for robot systems, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then, a PC-based Open Robot Controller(PC-ORC), which can reconfigure robot control systems in various production environments, is developed. The PC-ORC is built upon the object-oriented method, and allows an easy implementation and modification of various modules. The PC-ORC consists of basic softwares, application objects, and additional hardware device on the PC Platform. The application objects are: sequencer, computation unit, servo control, ancillary equipment, external sensor control, and so on. In order to demonstrate the applicability of the PC-ORC, the proposed PC-ORC configuration is applied to an industrial SCARA robot system.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.136-142
• /
• 2004

This paper deals with the design and implementation of an open architecture CNC system for Wire-EDM, with a consideration of the difference between Wire-EDM and NC cutting machines. Recent open architecture controller(OAC) related research results could be applied to directly access Wire-EDM systems at the CNC level. However, previous research about OAC is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to Wire-EDM. To close the gap between previous general research on OAC and Wire-EDM specific needs, an open architecture NC model for Wire-EDM composed of a synchronization kernel and a NC functional module is proposed. Based on the control information flow and Wire-EDM specific machining process, the conceptual CNC model and the detailed implementation model for Wire-EDM is suggested.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.280-287
• /
• 2022

An open rack vaporizer is a facility that vaporizes liquefied natural gas using sea water. When a vaporization efficiency of the open rack vaporizer decreases, liquefied natural gas can leak, which can cause great damage to the facility. Operators have to monitor the operation state of the facility in real-time to prevent the accident. However, operators have visited the site and have checked the state by looking at the value of sensors installed in the open rack vaporizer through indicators. For the safe operation of the open rack vaporizer, a monitoring system is needed to monitor the operation state of the open rack vaporizer in real-time without the need for operators to visit the site. In this paper, we developed a long term evolution based monitoring system to monitor the operation state of the open rack vaporizer. The developed system can monitor the real-time operation state of the open rack vaporizer at a control center far from the facility. For the system development, data transmission infrastructure using long term evolution was built. Afterwards a software was developed to monitor the operation state of the open rack vaporizer in real-time using the transmitted data. Finally, performance evaluation was conducted to confirm that the developed system operated successfully without data transmission delay or data missing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.13 no.2
• /
• pp.99-114
• /
• 1985

^x Open space has become the subject o\ulcorner remarkable, new interest ; and many studies have been done recently. In urban pattern, the significance of open space is not its quantity but how it is arranged. The end of this article is to set up a plan for the open space system for Kyongiu city. This paper has three parts : first, a brief discussion of the concept and function of open space ; secondly, a review of open space system ; and finally, a case study of Kyongju City. Especially, this study is focuced on the methodology in conserving and using prototype plan for historic and cultural environment. The result of this study may be summed up as follows : 1) The open space network for kyongju city can be planned out as a belt and ripple pattern. 2) The linear element of open space must play an important role in connecting each element with the whole open space system. 3 ) The Hwangseong pork can be the focal element of the open space system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.7-10
• /
• 2002

The diagnosis of faults of machine tool, which is controlled by CNC and PLC, is generally based on ladder diagram of PLC. Because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching for logical relation to fault reasons is required a lot of fault experiences and times, because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault lastly and correctly. The diagnosed reasons for fault are tele-serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1147-1154
• /
• 1993

This paper introduces a case of SCADA System replacing from centralized processing system to distributed/open architecture system. The cons and pros of the distinctive two system configurations were studied and the requirements of new system that would be enable to easily follow 21 century's technical and operational inovation were presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.472-475
• /
• 2005

This paper present a robot controller developed for shipbuilding yard. Since shipbuilding process handles large work pieces and has dusty and noisy environment, the developed controller has separated architecture into main control part and servo control part. Main control part is located in control room while servo control part is located near robot with work pieces. Commutation between two parts is done through SynqNet and RS485. Air purging system is adapted to servo control part for better reliability. We aimed open architecture in both hardware and software architecture. For open hardware architecture, we employed Compact PCI (cPCI) because it is widely used bus system and very reliable. Since lots of commercial boards are available with cPCI interface, upgrade and reconfiguration is easy. For open software architecture, Windows XP�� Embedded is selected as operating system (OS), because it is very popular OS and most hardware vender supports device driver for the windows XP.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.465-470
• /
• 2004

In this paper, an open architecture control system for automatic container cranes is investigated. A standard reference model for cranes, which consists of three modules； hardware module, operating system module, and application software module, is proposed. A hybrid control architecture combining deliberative and reactive controls for the autonomous operation of the cranes is proposed. The main contributions of this paper are as follows： First, a new reference platform for the crane control system is proposed. Second, by analyzing the structure of a container crane, implementation strategies for the automatic container crane are described.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.136-143
• /
• 2005

Open architecture controller (OAC) is well known technology in factory automation. To better understand the requirements of OAC, authors have discussed the OAC related topics with a number of control experts who represents different segments of the machining industry. There is no common concept that is accepted or used, however, the common ideas for OAC is the control system that is hardware independent, interchangeable, and easily scalable. This paper presents summary of the understaning and requirements of OAC. Based on the requirements of OAC, authors developed the software based PC-CNC. The main focus of the PC-CNC was on the user customization capability and open interface between control networks in manufacturing system. This paper introduces the developed PC-CNC briefly. In addition to introduction of the PC-CNC, to fill the gap between end users and vendors of OAC, this paper presents two applications using OAC. One is a remote monitoring system. The OPC (Ole for Process Control) standard interface was used to monitor the status of open architecture CNC across network. The other is the remote production management module for machine tools using standard database interface.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.4
• /
• pp.17-24
• /
• 2016

Since the users have direct access to search and browse freely, the open access system has been employed to all the usual modern libraries. However, library space shortage problem created by the continuously increasing printed materials caused the degradation of usability and quality of the library space. Open Access system is superior in user convenience but is inferior in space efficiency. Keeping the open access system is considered as one of the reasons of the space shortage problem. Even though the closed access system does not provide free access or easy browsing for the uses, it's space efficiency is much higher than the open access system. The closed access system should be employed as a plan to relieve space shortage problem. Since the closed access system does not allow the public direct access to books, it is very economical. It also provides much better space efficiency with higher book shelving density. In this article, closed access library system models and their characteristics are examined as the reduction plans for the library space shortage problems.