• Wind and Structures
• /
• v.23 no.1
• /
• pp.45-57
• /
• 2016

Open-cross-section composite beam (OCB) tends to suffer vortex-induced vibration (VIV) due to its bluff aerodynamic shape. A cable-stayed bridge equipped with typical OCB is taken as an example in this paper to conduct sectional model wind tunnel test. Vortex-induced vibration is observed and maximum vibration amplitudes are obtained. CFD approach is employed to calculate the flow field around original cross sections in service stage and construction stage, as well as sections added with three different countermeasures: splitters, slabs and wind fairings. Results show that flow separate on the upstream edge and cause vortex shedding on original section. Splitters can only smooth the flow field on the upper surface, while slabs cannot smooth flow field on the upper or lower surface too much. Thus, splitters or slabs cannot serve as valid aerodynamic means. Wind tunnel test results show that VIV can only be mitigated when wind fairings are mounted, by which the flow field above and below the bridge deck are accelerated simultaneously.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.31-36
• /
• 2015

The fatigue analysis for cutout panel used for the weight reduction of aircraft has been conventionally performed through the open hole concept using the reference stress and stress concentration factor (Kt). However, in the actual structure cases, the goal of weight reduction might be less meaningful due to the conservative approach induced by the difficulties of extracting the confident reference stress from FE-Analysis in the complicated loading behavior. Therefore a new approach is proposed in order to secure the effectiveness of weight reduction and validate the confidence of the analysis results using the interaction of max-min principal stress at the critical location of open hole edge line.

• Archives of Plastic Surgery
• /
• v.50 no.4
• /
• pp.389-392
• /
• 2023

A 14-year-old girl had a midfacial trauma event caused by hitting against an opening door and experienced discomfort and swelling of the columella and upper lip. Physical examination revealed mild tenderness on light palpation without any discomfort with upper lip movement. A computed tomography scan of the maxillofacial bones with three-dimensional reconstruction showed a fracture of the anterior nasal spine with obvious leftward displacement, mild-deviation of the caudal aspect of the nasal septum, and no sign of nasal bone fracture. Open reduction and internal fixation was performed with regard to aesthetic and functional concerns, including nasal septum deviation. The postoperative course was uneventful, and healing proceeded normally without complications. Herein, we emphasize the importance of differential diagnosis of isolated anterior nasal spine fractures in patients with midfacial trauma and clinicians' strategic decision-making in treatment modalities.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.11-23
• /
• 2012

To achieve efficient code size reduction, this paper proposes a new compressed instruction set architecture for the OpenRISC architecture. The new instructions and their corresponding formats are designed by the profiling information of the existing instruction usage. New 16-bit instructions and 32-bit instructions are proposed to compressed the existing 32-bit instructions and instruction sequences, respectively. The proposed instructions can be classified into three types. The first is the new 16-bit instructions for the frequent normal 32-bit instructions such as add, load, store, branch, and jump instructions. The second type is the new 32-bit instructions for the consecutive two load instructions, two store instructions, and 32-bit data mov instructions. Finally, two new 32-bit instructions are proposed to compress function prolog and epilog code, respectively. OpenRISC hardware decoder is extended to support the new instructions. Experiments show that the efficiency of code size reduction improves by an average of 30.4% when compared to the OR1200 instruction set architecture without loss of execution performance.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.792-796
• /
• 2006

Purpose: After exposure of fracture site, the proximal segment must be reduced to their preinjury position for open reduction of fractured mandibular condyle. We examined the use of inter-maxillary fixation screws or titanium screws tied with stainless steel wire to assist in positioning of proximal segment. Since it enables to make a relatively small preauricular incision by not disturbing the operative field like Moule pin, we can reduce the danger of injury to the facial nerve. Methods: A preauricular approach was used for exposure, reduction, and rigid fixation in 4 cases of mandibular condylar fractures. Inter-maxillary fixation screws or titanium screws tied with stainless steel wire were used to assist in aligning proximal segment. The joints were submitted to functional exercises and postoperative radiologic and clinical follow-ups were performed. Results: No facial nerve lesions were found in all 4 cases. Radiologic follow-up showed correct reduction and fixation in all 4 cases. Clinical follow-up showed an initial limitation, but normal morbility of the condyle was achieved within 4 months after the operation, with a maximum mouth opening of $34.1{\pm}5.2mm$ after 12 months. There found no occlusal disturbances, no trismus, no lateral deviations of the mandible. Conclusion: By using Inter-maxillary fixation screws tied with stainless steel wire, it was shown that reducing the proximal segment to their preinjury position is easy to perform and it enables us to make a minimal dissection below preauricular skin incision to avoid facial nerve injury.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.397-402
• /
• 2013

Background Fracture-dislocation of the proximal interphalangeal (PIP) joint is a relatively common injury. Various treatments for fracture-dislocation of the PIP joint have been reported. In the present study, we performed open reduction through a midlateral incision using absorbable sutures to reduce the small bone fragments and performed volar plate repair. Methods We treated nine patients with fracture-dislocation of the PIP joint with small fractured bone fragments too small for pinning or screw fixation. Patients with volar plate injury were treated with open reduction and volar plate repair at the periosteum of the middle phalangeal bone base by the modified Kessler method using absorbable sutures. All patients were placed in a dorsal aluminum extension block splint, which maintained the PIP joint in approximately 30 degrees of flexion to avoid excessive tension on the sutured volar plate. Results At a mean final follow-up of postoperative 9 months, all patients were evaluated radiographically and had adequate alignment of the PIP joint and reduction of the displaced bone fragments. Range of motion was improved and there were no complications. Conclusions This technique is an excellent alternative to the current method of treating patients with fracture-dislocations that include small fragments that are too small for pinning or screw fixation. It is a less invasive surgical method and enables stable reduction and early exercise without noticeable complications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.6
• /
• pp.297-300
• /
• 2014

Objectives: To compare the clinical and radiological outcomes after closed reduction (CR) and open reduction and internal fixation (ORIF) in the management of subcondylar fractures. Materials and Methods: Forty-eight patients presenting with subcondylar fracture between January 2010 and March 2013 were evaluated retrospectively. Fifteen patients were treated with CR and 33 patients with ORIF. The clinical and radiologic parameters were evaluated during follow-up (mean, 7.06 months; range, 3 to 36 months). Results: In the CR group, no patients had any problems with regard to the clinical parameters. The average period of maxillomandibular fixation (MMF) was 5.47 days. The preoperative average tangential angulation of the fractured fragment was $3.67^{\circ}$, and loss of ramus height was 2.44 mm. In the ORIF group, no clinical problems were observed, and the average period of MMF was 6.33 days. The preoperative average tangential angulation of the subcondylar fragment was $8.66^{\circ}$, and loss of ramus height was 3.61 mm. Conclusion: CR provided satisfactory clinical results, though ORIF provided more accurate reduction of the fractured fragment. So there is no distinct displacement of fractured fragment, CR should be selected than ORIF because of no need for surgery.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.4
• /
• pp.248-251
• /
• 2007

Atlantoaxial rotatory dislocation [AARD] is an uncommon disorder of childhood in which clinical diagnosis is generally difficult and often made late. It is very rare in adults because of the unique biomechanical features of the atlantoaxial articulation. We report a case of post-traumatic AARD in an adult. Reduction was difficult to obtain by skull traction and gentle manipulation. Therefore, the patient was treated surgically by an open reduction, transpedicular screw fixation, and posterior C1-2 wiring with graft. The normal atlantoaxial relation was restored with disappearance of torticollis. Postoperatively, the patient remains neurologically intact and has radiographic documentation of fusion. Atlantoaxial transpedicular screw fixation can be one of the treatment options for the AARD.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.720-724
• /
• 1998

Open-top field chamber study was carried out to investigate effect of ambient ozone level on the yield of rice cultivar 'Dongjin' in Kwangyang area located in the vicinity of the industrial complex of Yechon petrolium refinery and chemical works or Kwangyang Iron and Steel works during the summer of 1997. mean ozone concentration of ambient air during daytime (9:00∼17:00) was revealed to exceed over 40 ppb which is defined to be a critical level causing plant injury and yield reduction in Europe. Yield component analysis showed that there was no significant difference in rice yield between ambient air and charcoal-filtered air. The results suggest that the ambient ozone levels during the exposure period had no effect on yield reduction of rice cultivar 'Dongjin' and it is likely that the cultivar is tolerant to ambient ozone levels.

• Wind and Structures
• /
• v.9 no.1
• /
• pp.59-74
• /
• 2006

Vertical stabilizer plates have been found to be an effective aerodynamic measure to improve the aerodynamic stability of bridges either with an open cross section or with a streamlined box cross section in wind tunnel testings and have been adopted in some long span bridges. By taking an open deck II-shaped section and a closed box section as examples, the mechanism of vertical stabilizer plates for improving aerodynamic stability are investigated by using numerical simulation based on Random Vortex Method. It is found that vertical stabilizer plates can increase the amplitude of the heaving motion, and decrease that of the rotational motion of the bridge decks.