Nayoung, Kim;Do Won, Kim;Nam Su, Park;Gyeong Hun, Kim;Yang Do, Kim;Chang-Seok, Kim
Current Optics and Photonics
/
제7권1호
/
pp.38-46
/
2023
Optical Fourier-domain reflectometry (OFDR) sensors have been widely used to measure distances with high resolution and speed in a noncontact state. In the electroplating process of a printed circuit board, it is critically important to monitor the copper-plating thickness, as small deviations can lead to defects, such as an open or short circuit. In this paper we employ a phase-based OFDR sensor for in situ relative distance sensing of a sample with nanometer-scale resolution, during electroplating. We also develop an optical-path difference (OPD)-regulated sensing probe that can maintain a preset distance from the sample. This function can markedly facilitate practical measurements in two aspects: Optimal distance setting for high signal-to-noise ratio OFDR sensing, and protection of a fragile probe tip via vertical evasion movement. In a sample with a centimeter-scale structure, a conventional OFDR sensor will probably either bump into the sample or practically out of the detection range of the sensing probe. To address this limitation, a novel OPD-regulated OFDR system is designed by combining the OFDR sensing probe and linear piezo motors with feedback-loop control. By using multiple OFDR sensors, it is possible to effectively monitor copper-plating thickness in situ and uniformize it at various positions.
Min Gyu Kong;Inki Moon;Hye-Sun Seo;Jon Suh;Jah Yeon Choi;Jin Oh Na;Eung Ju Kim
International Journal of Heart Failure
/
제6권1호
/
pp.22-27
/
2024
Body fluid monitoring and management are essential to control dyspnea and prevent re-hospitalization in patients with chronic heart failure (HF). There are several methods to estimate and monitor patient's volume status, such as symptoms, signs, body weight, and implantable devices. However, these methods might be difficult to use for reasons that are slow to reflect body water change, inaccurate in specific patients' condition, or invasive. Bioelectrical impedance analysis (BIA) is a novel method for body water monitoring in patients with HF, and the value in prognosis has been proven in previous studies. We aim to determine the efficacy and safety of home BIA body water monitoring-guided HF treatment in patients with chronic HF. This multi-center, open-label, randomized control trial will enroll patients with HF who are taking loop diuretics. The home BIA group patients will be monitored for body water using a home BIA device and receive messages regarding their edema status and direction of additional diuretics usage or behavioral changes through the linked application system once weekly. The control group patients will receive the usual HF management. The primary endpoint is the change in N-terminal prohormone of brain natriuretic peptide levels from baseline after 12 weeks. This trial will provide crucial evidence for patient management with a novel home BIA body water monitoring system in patients with HF.
본 논문에서는 저 전력 멀티미디어 응용을 위한 10b 100 MS/s $1.4\;mm^2$ CMOS A/D 변환기(ADC)를 제안한다. 제안하는 ADC는 해상도 및 속도 사양을 만족시키면서, 면적 및 전력 소모를 최소화하기 위해 기존의 다단 구조가 아닌 2단 파이프라인 구조를 사용하였다. 그리고 10 비트 해상도에서 1.2 Vp-p의 단일 및 차동 입력 신호 처리 대역폭을 넓히기 위해 입력 샘플-앤-홀드 증폭기에는 게이트-부트스트래핑 회로를 적용하며, 6 비트 해상도를 필요로 하는 두 번째 단의 flash ADC에는 오픈-루프 오프셋 샘플링 기법을 적용하였다. 또한 커패시터 등 소자 부정합에 의해 해상도에 크게 영향을 줄 수 있는 MDAC의 커패시터에는 3차원 완전 대칭 구조를 갖는 레이아웃 기법을 제안하였다. 기준 전류/전압 발생기는 온-칩으로 집적하여 잡음 에너지를 줄였으며, 필요시 선택적으로 다른 크기의 기준 전압을 외부에서 인가하도록 설계하였다. 제안하는 10b 시제품 ADC는 0.18 um CMOS 공정으로 제작되었고, 측정된 DNL 및 INL은 각각 0.59 LSB, 0.77 LSB 수준을 보여준다. 또한 100 MS/s의 샘플링 속도에서 SNDR 및 SFDR이 각각 54 dB, 62 dB 수준을 보였으며, 전력 소모는 56 mW이다.
본 논문에서는 초광대역 통신시스템 응용을 위한 이중채널 6b 1GS/s A/D 변환기 (ADC)를 제안한다. 제안하는 ADC는 IGS/s의 신호처리속도에서 전력, 칩 면적 및 정확도를 최적화하기 위해 인터폴레이션 기반의 6b 플래시 ADC 회로로 구성되며, 입력 단에 광대역 열린 루프 구조의 트랙-앤-홀드 증폭기를 사용하였으며, 넓은 입력신호범위를 처리하기 위한 이중입력의 차동증폭기와 함께 래치 단에서의 통상적인 킥-백 잡음 최소화기법 등을 적용한 비교기를 제안하였다. 또한, CMOS 기준 전류 및 전압 발생기를 온-칩으로 집적하였으며, 디지털 출력에서는 새로운 버블 오차 교정회로를 제안하였다. 본 논문에서 제안하는 ADC는 0.18um 1P6M CMOS 공정으로 제작되었으며, 1GS/s의 동작속도에서 SNDR 및 SFDR은 각각 최대 30dB, 39dB를 보이며, 측정된 시제품 ADC의 DNL 및 INL은 각각 1.0LSB, 1.3LSB 수준을 보여준다. 제안하는 이중채널 ADC의 칩 면적은 $4.0mm^2$이며, 측정된 소모 전력은 1.8V 전원 전압 및 1GS/s 동작속도에서 594mW이다.
본 설계에서는 무선 랜 등 최첨단 무선 통신 및 고급영상 처리 시스템과 같이 고해상도와 높은 신호처리속도, 저전력 및 소면적을 동시에 요구하는 고성능 집적시스템 응용을 위해 기존의 보정기법을 사용하지 않는 14b 70MS/s 0.13um CMOS A/D 변환기(Analog-to-Digital Converts- ADC)를 제안한다. 제안하는 がU는 중요한 커패시터 열에 인접신호에 덜 민감한 3차원 완전 대칭 구조의 레이아웃 기법으로 소자 부정합에 의한 영향을 최소화하였고, 3단 파이프라인 구조로 고해상도와 높은 신호처리속도와 함께 전력 소모 및 면적을 최적화하였다. 입력 단 SHA 회로에는 Nyquist 입력에서도 14비트 이상의 정확도로 신호를 샘플링하기 위해 게이트-부트스트래핑 (gate-bootstrapping) 회로를 적용함과 동시에 트랜스컨덕턴스 비율을 적절히 조정한 2단 증폭기를 사용하여 14비트에 필요한 높은 DC전압 이득을 얻음과 동시에 충분한 위상 여유를 갖도록 하였으며, 최종 단 6b flash ADC에는 6비트 정확도 구현을 위해 2단 오픈-루프 오프셋 샘플링 기법을 적용하였으며, 기준 전류 및 전압 발생기는 온-칩으로 집적하여 잡음을 최소화하면서 필요시 선택적으로 다른 크기의 기준 전압 값을 외부에서 인가할 수 있도록 하였다. 제안하는 시제품 ADC는 0.13um CMOS 공정으로 요구되는 2.5V 전원 전압 인가를 위해 최소 채널길이는 0.35um를 사용하여 제작되었으며, 측정된 DNL 및 INL은 14비트 해상도에서 각각 0.65LSB, 1.80LSB의 수준을 보이며, 70MS/s의 샘플링 속도에서 최대 SNDR 및 SFDR은 각각 66dB, 81dB를 보여준다. 시제품 ADC의 칩 면적은 $3.3mm^2$이며 전력 소모는 2.5V 전원 전압에서 235mW이다.
연안 소형 어선의 조업 효율을 향상시키기 위한 연구의 일환으로 소형 유압식 어로윈치시스템을 설계하고, auto tension 기능을 내장시켜 이 시스템의 개루프 상태에 대한 동적 응답 특성을 분석, 고찰한 결과를 요약하면 다음과 같다. 1. 본 연구에서 설계, 제작한 소형 윈치시스템은 갑판상 어느 장소에서도 조작이 가능하도록 원격조작방식을 채용하고 있기 때문에 어로 작업시의 인력 감소와 작업의 효율성을 높일수 있다고 생각된다. 2. 솔레노이드 밸브를 ou/off 조작하여 윈치를 구동할 때, 정전 및 역전 구동 조작에 대한 윈치 드럼의 회전 지연시간(dead time)은 각각 0.09 sec, 0.04 sec이었다. 또한 on/off 레버의 조작을 행한 직후 응답 특성은 약간 불안정하였지만, 짧은 경과 시간을 거쳐 안정되는 추종성능을 나타내었다. 3. 윈치를 auto tension mode로서 구동하는 경우, 윈치의 회전축에 55.9 kgf$.$m 이상의 토오크가 작용하면 윈치는 5.1 rpm의 회전속도로서 줄을 풀어내고, 그 이하의 토오크가 작용하면 11.1 rpm의 회전속도로서 줄을 감아들이는 자동 권양 윈치의 기능을 발휘한다. 4. 윈치의 auto tension mode에 대한 과도 응답에서 부하가 급격히 증가할 때와 감소할 때의 정정 시간은 0.12 sec, 0.2sec이었고, 그 때의 회전속도는 각각 11 rpm, 5.3 rpm이었다. 5. 원격제어조작에 따른 윈치의 토오크 및 회전속도에 대한 추종성능은 정전 구동에 있어서는 0.23 sec, 역전 구동의 경우에 있어서는 0.37 sec 이내로서 비교적 안정된 응답 특성을 나타내었다. 이상의 결과로부터 본 연구에서 설계한 소형 어선용 자동 권양 윈치 시스템은 인력을 절감하고, 부하의 급속한 변화에 대한 추종 성능이 현용 어로시스템에 비하여 매우 우수하기 때문에 해상에서 어로작업시 과부하에 대한 어구의 손상 방지 및 조업 효율의 향상에 크게 기여할 것으로 판단된다.
In order to observe the responses of the periodontal tissue on the tension side following the experimental tooth movement, 35 Guinea pigs were divided into the control group (5 animals) and 6 experimental groups (3 movement groups and 3 retention groups) consisting of each 5 animals. The experimental tooth movement of Guinea pig's upper incisors installing open helical loop were carried out by rendering continuous force : 5g (1st groups) 35g (2nd groups), 100g (3rd groups), respectively for 7 days. 3 movement groups (15 animals) were sacrificed soon after the continuous force, and 3 retention groups (15 animals) were sacrificed after the retention period of another 7 days. The following results were obtained from the observation of the surrounding tissues of teeth on the tension side through light microscopy any transmission electron microscopy. 1. The vessel walls in the experimental groups were thinner than those of the control group, the number of blood vessel had the tendency to increase. The greater the strong force applied to each group, the more the destruction of cells and fibers was found and the more the number of the red blood cell of vessel outside appeared. 2. New collagen fibers were produced from fibroblasts in the 1st groups (light force), but were produced rather less in the 2nd groups (medium force) and the 3rd groups (heavy force). 3. In the forming patterns of the new alveolar bone of the 3rd groups (heavy force), the bone trabeculae were formed towards the direction of the force to be applied, but the new alveolar bone in the 1st groups (light force) was produced evenly throughout the all surfaces of the alveolar bone rather than the patterns of bone trabeculae ; therefore, the patterns of new alveolar bone were observed differently according to the magnitude of the force applied. 4. In the retention group, it was observed that the collagen fibers were produced from the osteoblasts in the marginal areas of the periodontal ligaments being widely opened and were deposited on the alveolar bone surface but the production of collagen fibers from the osteoblasts in the other area of the periodontal ligaments was almost ceased, and a rest line on the new alveolar bone surface was found.
미래형 이동통신 시스템에서 셀 경계와 같이 반송파댄간섭전력비 (Carrier-to-Interference Ratio; CIR)가 낮은 열악한 채널 환경에서 하향링크 실시간 트래픽의 전송 성능 개선을 위한 Beanforming 기반 MIMO-OFDMA (Multi Input Multi Output-Orthogonal Frequency Division Multiple Access) 시스템을 제안한다. 우선 기본적인 MIMO-OFDM 시스템의 성능 향상을 위해 송신단 MRT (Maximum Ratio Transmission) 및 수신단 MRC (Maximum Ratio Combining) 기법의 연동을 고려하고, 이에 적합하도록 공간 자원 그룹화 기반의 CSI (Channel State Information) 계산법을 이용한 M-GTA-SBA (Modified-Grouped Transmit Antenna-Simple Bit Allocation) 기법을 고려한다 또한 Beamforming 적용으로 인한 상향링크에서의 과도한 궤환 정보량의 감소를 위해 Beam Weight 양자화 기반의 QEGT (Quantized Equal Gain Transmission) 기법을 적용하며, 다중 사용자 환경에서의 효율적인 자원 할당을 위해 P-SRA (Proposed Simple Resource Allocation) 알고리즘을 제안한다. 모의실험 결과, 제안된 시스템은 상향링크의 궤환 정보량을 감안하더라도 H-ARQ IR (Hybrid-Automatic Repeat Request Incremental Redundancy)과 Pseudo-Orthogonal Space Time Block Code를 사용하는 전형적인 개방루프형 MIMO-OFDMA 시스템에 비해 낮은 CIR 영역에서 월등히 개선된 주파수 효율 성능을 보임을 확인하였다.
최근 영화적 제작에서 필름과 애니메이션은 입체시각과 3D 댑스를 관객들을 위해 만들고 있다. 소비자 입장의 VR 기술의 성숙은 동시에 미디어 제작 추세를 3D 공간, 컴퓨터 게임에서 포르노 비디오 그리고 아카데미에 노미네이트된 VR 단편 'Pearl'에 이르기까지 박차를 가한다. 이 모든 작업들이 양안시차의 정도에 반응하는 우리의 눈이 뇌의 좌우반구에 영향을 받아 입체시를 이루는 입체 퓨전과 연관이 있다. 이는 인간의 정상 시각을 모방한 것이다. 하지만 실험적 작업에서는 3D 공간 제작이 바람직한 것만은 아니다. 본인의 추상 애니메이션 작품에서, 본인은 2D의 평평함과 장소의 혼돈성을 즐겨 사용한다. 이러한 점이 본인이 추상적 시각을 추구하는 부분이다. 내 앞에 있는 것과 무엇이 뒤에 있는지를 즉각적으로 이해할 수 없어서, 감상에서 요구되는 효과를 강화한다. 2015년에 큐레이터인 제프리 쇼(Jeffrey Shaw)가 나에게 아니마 믹스 비엔날레(2015~2016)를 위한 입체시각 작품 제작을 요구했다. 이것이 나로 하여금 어떻게 3차원에서 초결정적 공간보다 입체경이 장소적 시각의 혼돈을 성취하는가라는 질문에 대한 호기심이 일도록 만들었다. 그리고 연달아서, 어떻게 추상과 실험 움직임 이미지 실행이 입체경으로부터 새로운 시각과 네러티브 기회를 여는 해택을 얻을 수 있는가, 만약 유기적인 융합을 넘어서는 방법으로 사용된다면 말이다. 주목할 만한 작업은 전통성 내의 전형적인 예, 양안시에 대한 확장된 접근이 본 논문에서 논의될 것이다. 본고에서는 본인이 아니마믹스 비엔날레를 위해 작업한 반복 입체시 애니메이션 III=III의 간략한 소개와 예술가들이 관심가질 만한 기술, 즉 입체시와 관련된 더욱 실험적이고 확장된 작업방법에 대해 논할 것이다.
For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.