• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.349-354
• /
• 2001

The present study addresses the open end correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open end correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end, and computation is performed to simulate the experimental flow field using the unsteady, axisymmetric, compressible, flow governing equations. The results obtained show that an open end correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open end baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude. However, for a baffle plate larger than three times the duct diameter, it is independent of the baffle plate diameter. The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open end correction is found for the weak shock reflection and discharge phenomena occurring at the open end of the duct with and without a baffle plate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.7
• /
• pp.239-246
• /
• 2001

The present study addresses the open correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end. and computaion is performed to simulate the experimental flow field using the unsteady, axisymmetric compressible. flow governing equations. The results obtained show the an open correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude However, for a baffle plate larger than three the duct diameter it is independent of the baffle plate diametre, The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open correction is found for the weak shock reflection and discharge phenomena occurring at the open of the duct with and without a baffle plate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.618-626
• /
• 1998

This paper describes a series of fundamental studies on reflection and emission of weak pressure waves from an open end of a pipe. Acoustical theories which have been employed in the plane pressure waves inside a pipe are applied to the present study. The objective of the present study is to investigate the reflection or emission coefficient of pressure wave at an open end of a pipe, the length of open end correction, and the directivity characteristics of the pressure waves emitted from the pipe. The results show that the reflection coefficient of pressure wave at an open end and the length of open end correction decrease for the wave length of pressure wave to increase. It is also found that the reflection coefficient for a baffle plate at the exit of pipe is larger than that for no baffle plate.

• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.174-182
• /
• 1979

This is a report on four cases of successful surgical correction of coarctation of the aorta [COA] in Department of the Thoracic & Cardiovascular Surgery, Hanyang University Hospital. The first case was a postductal type of coarctation of the aorta associated with Patent ductus arteriosus [PDA], Persistent left superior vena cava [LSVC] and richly developed collateral circulation. Blood pressure was measured to be hypertensive at the arm, but hypotensive at the legs. The coarctation of the aorta was corrected with following procedure: Partial resection of the aortic wall with diaphragmatic structure lust above and below the coarctating line of the aorta, and then the defect of the aortic wall was closed by lateral aortographic suture. PDA was closed by ligation procedure. The second case a preductal type of coarctation of the aorta associated with PDA, LSVC, ventricular septal defect [VSD] and poorly developed collateral circulation. Normal blood pressure was measured at the arm, but hypotension was observed at the legs. Correction of coarctation of the aorta was performed under the establishment of tube bypass because of poor collateral circulation. After resection of coarctating short segment, end to end anastomosis was performed without any tension. PDA was closed by division procedure. Simple suture closure of VSD was performed by open heart surgery two weeks after correction of COA. The third case was a long segment COA without any other anomaly. Blood pressure was measured to be hypertensive at the arm, but hypotensive at the legs. Vascular prosthesis was performed using Teflon graft tube after resecting coarctating long segment [6.5 cm] of the aorta. The fourth case was a long segment COA associated with aortic insufficiency and richly developed collateral circulation. Normal blood pressure was measured at the arm, but hypotension was observed at the legs. Vascular prosthesis was performed using Teflon graft tube after resecting coarctating long segment [6.0 cm] of the aorta. Both blood pressure and peripheral pulse on the arm and the legs returned to normal postoperatively in all patients.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.605-614
• /
• 1985

The principal aim of surgery for congenital heart anomalies is the establishment of normal hemodynamic function. Palliative and corrective operations are selected with time to attain this end with minimal risk. In recent years, as operative mortality after primary total correction is lower than the mortality after early palliation and delayed correction, corrective operations in infants have increasingly supplanted palliative ones. Two hundred and eighteen infants below 10 kg with congenital heart anomalies underwent primary surgical intervention at Yonsei Medical Center from March 1979 to June 1985. There were 155 infants with VSD, 35 Infants with TOF, 5 infants with ECD, 4 infants with TGV, 3 infants with DORV, 3 infants with Pulmonary atresia, 3 infants with ASD and PDA, 2 infants with DOLV, and the remainders were Sinus Valsalva rupture, residual mitral regurgitation after total correction of ECD, PAPVR, Cor triatriatum, Truncus arteriosus, and Tricuspid atresia. The overall surgical mortality was 15.1%. In the acyanotic group, 13 infants died among 168 infants, and mortality was 7.7%. But in the cyanotic group, the mortality rate was very high and 20 infants died among 50 infants raising the mortality to 40.0%. These poor surgical results in the cyanotic or complicated group was due to inaccurate diagnosis, improper surgical methods and inadequate post-operative care which should be improved.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.31-40
• /
• 2008

Objective: This study investigated the skeletal and dentoalveolar changes after intrusion of maxillary posterior teeth using miniscrew implants during the treatment and posttreatment period. Method: The subjects consisted of 11 adults (1 male, 10 females) whose open bites were treated by posterior teeth intrusion with miniscrew. The lateral cephalometric x-rays of pre-treatment, post-treatment, and the retention period were evaluated. Results: The average intrusion of maxillary posterior teeth at the end of the treatment period was 2.22 mm (p < 0.001) and the average extrusion of maxillary posterior teeth at the end of the 17.4 month retention period was 0.23 mm (p = 0.359). The relapse rate was calculated at 10.36%. A decrease in overbite after the 17.4 month retention period was 0.99 mm (p < 0.05). The relapse rate was calculated at 18.10%. The skeletal changes and vertical height change of maxillary posterior teeth during the retention period was statistically insignificant, but there was a significant decrease in overbite (mean 0.99 mm, p < 0.05). The amount of intrusion and the overbite improvement from treatment significantly correlates to the degree of relapse. Conclusions: The results indicate that intrusion of the maxillary posterior teeth using miniscrews is an effective, non-surgical treatment modality which can reasonably be used to address adult open bite.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.183-196
• /
• 2016

Ground control points are needed for precision geometric correction of satellite images, and the coordinates of a high-quality ground control point can be obtained from the GPS measurement. However, considering the GPS measurement requires an excessive amount o f t ime a nd e fforts, there is a need for coming up with an alternative solution to replace it. Therefore, we examined the possibility of replacing the existing GPS measurement with coordinates available at online maps to acquire the coordinates of ground control points. To this end, we examined error amounts between the coordinates of ground control points obtained through Daum Map API, and them compared the accuracies between three types of coordinate transformation equations which were used for geometric correction of satellite images. In addition, we used the coordinate transformation equation with the highest accuracy, the coordinates of ground control point obtained through the GPS measurement and those acquired through D aum M ap A PI, and conducted geometric correction on them to compare their accuracy and evaluate their effectiveness. According to the results, the 3rd order polynomial transformation equation showed the highest accuracy among three types of coordinates transformation equations. In the case of using mid-resolution satellite images such as those taken by Landsat-8, it seems that it is possible to use geometrically corrected images that have been obtained after acquiring the coordinates of ground control points through Daum Map API.

• Archives of Plastic Surgery
• /
• v.36 no.1
• /
• pp.66-74
• /
• 2009

Purpose: The importance of the deformities in alar - columellar complex has been underestimated in Asian ethnic groups for the last decades. Fortunately, with increasing familiarity of the open rhinoplasty techniques, the anatomic details of the nasal tip have been pointed up. Definitely, having an interest and demand for improving the sub - normal relationship between the alar rim and columella are indebted for such growing of knowledge about nasal tip anatomy. However, it is true that any single procedure is not settled as versatile and fully confident modality to correct the retracted notching of the alar rim. With this article, I should like to propose another useful option for treating retracted ala. Methods: The author has tried to correct alar rim retraction by means of: (1) Triangular onlay septal cartilage graft on the lower lateral cartilage with the medial end fixed to the anterior surface of the lateral crus(Alar extension graft), (2) Inserting lateral end of the alar extension graft to the vestibular skin pocket in the form of a finger - in - groove, (3) using the vestibular skin in the form of an advancement flap, and (4) using the soft shield graft to prevent possible visible step - off of the alar margin. Results: The author applied an alar extension graft to 16 patients in order to correct a retracted ala for the last 27 months (August, 2003 - October, 2005). The distances from alar rim to long axis of nostril were improved to be within 2 mm in all of the cases, and also the shape of the alar rim changed to a round form. Nostril asymmetry (6%) in one case, temporary palpable step - off (18%) in three cases, temporary visible step - off (6%) in one case, and temporary paresthesia of the tip (25%) in four cases were observed. Conclusion: The alar extension graft is simple and efficacious. It does not need donor sites other than the operative field, and its results are predictable. In particular, since it may give structural intensity to a weak lower lateral cartilage, it may be preferentially used for the correction of a retracted ala that arises from hypoplastic lower lateral cartilage. Moreover intensified lower lateral cartilage also improves the esthetic shape of lobule.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.120-126
• /
• 2009

Purpose: Autogenous cartilage is generally first choice in rhinoplasty because of its biocompatibility and resistance to infection. On the other hand, allogeneous cartilage graft might preferred over an autogenous graft to avoid additional donor site scars, morbidity and lengthened operating time. Allogenous costal cartilage ($Tutoplast^{(R)}$) not only have the advantage of averting donor site morbidity but also are resistant to infection, resembling autogenous cartilage graft. We report here a technique for rhinoplasty by using allogenous costal cartilage graft. Methods: Through open rhinoplastic approach, alar cartilage is released from upper lateral cartilage and relocated caudally. After relocation of alar cartilage, allogenous costal cartilage is immobilized by nonabsorbable suture material at caudal aspect of septal cartilage. Caudal end of allogenous costal cartilage is sutured between medial crura of alar cartilage. Tip projection is improved by using interdormal suture, transdormal suture and shield-shape cartilage graft which is harvested from concha Results: No significant resorption and infection was detected in any of patients. Aesthetic and functional results were satisfactory. Conclusion: The low incidence of major complication and versatility of allogeneous costal cartilage graft make safe and reliable source of cartilage graft in rhinoplasty.

• Journal of Educational Research in Mathematics
• /
• v.17 no.1
• /
• pp.67-90
• /
• 2007

The purpose of this study is to understand students' thinking process in the algebra problem solving, on the base of the works of Vinner(1997a, 1997b). Thus, two middle school students were evaluated in this case study to examine how they think to solve algebra word problems. The following question was considered to analyze the thinking process from the similarity-based perspective by focusing on the process of solving algebra word problems; What is the relationship between similarity and the characteristics of thinking process at the time of successful and unsuccessful problem solving? The following results were obtained by analyzing the success or failure in problem solving based on the characteristics of thinking process and similarity composition. Successful problem solving can be based on pseudo-analytical thought and analytical thought. The former is the rule applied in the process of applying closed formulas that is constructed structural similarity not related with the situations described in the text. The latter means that control and correction occurred in all stages of problem solution. The knowledge needed for solutions was applied with the formulation of open-end formulas that is constructed structural similarity in which memory and modification with the related principles or concepts. In conclusion, the student's perception on the principles involved in a solution is very important in solving algebraic word problems.