• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.771-774
• /
• 1999

This study was carried out to quantitatively investigate the amount of corrosion at the time of onset of cracks in cover concrete due to rebar corrosion. In this experiments, the accelerated galvanostatic corrosion method was carried out. FEM analyses were also conducted to investigate the expansive behaviors due to rebar corrosion and the mechanical properties of corrosion products. As a result, it was concluded that the corrosion ratio at the time of onset of cracks in cover concrete was 3% by weight. The onset of cracks in cover concrete due to rebar corrosion could be analyzed by the finite element method.

• 분석과학
• /
• 제15권5호
• /
• pp.459-465
• /
• 2002

본 연구에서는 금속가공유 (metalworking fluids, MWF)를 취급하는 사업장에서 채취한 벌크시료와 공기중 시료를 대상으로 엔도톡신 (endotoxin)의 정확한 분석을 위한 Optical Density (OD)의 설정조건을 검토하였다. OD값을 설정하는 Onset time방법이 "time to $V_{max}$"방법보다 재현성, 정확성이 높았다. 구체적인 OD설정값은 "0.03"이 가장 적정한 것으로 나타났다. 검량선의 상관계수 (직선성)가 0.998로서 가장 높았고 회수율도 88% - 105% (0.05 EU/mL과 5 EU/mL 범위)로서 다른 OD값 (OD "0.05", OD "0.1", "time to $V_{max}$")보다도 적정하였다. Onset time방법에서 설정해야 할 OD값은 "0.03"과 "0.05"이 적정한 것으로 나타났다. OD "0.03"과 "0.05"에 의한 엔도톡신 분석결과간의 상관계수 ($\gamma$)는 MWF시료에서는 0.97 그리고 공기 중 시료에서는 0.99로 유의하게 나타났다. 따라서 금속가공유를 대상으로 엔도톡신을 분석할 때는 Onset time 방법을 선택하고 구체적인 OD설정 값은 "0.03"과 "0.05"중에서 검량선의 상관성 (linearity)이 0.98 이상을 나타내는 OD값으로 분석하는 것이 적정한 것으로 판단된다.

• 정형스포츠물리치료학회지
• /
• 제14권2호
• /
• pp.55-64
• /
• 2018

Purpose : The purpose of this study was to investigate the effect of the sprinter and skater combined patterns on muscle contraction onset time and muscle activation of body stabilizing muscles. Method : Our study included young and healthy men in their 20s. The participants used the sprinter and skater combined patterns of the proprioceptive neuromuscular facilitation (PNF) methods to measure muscle activation and muscle contraction onset time of the trunk muscles. To measure muscle contraction onset time and muscle activation, electrodes were attached to the rectus abdominis (RA), external oblique (EO), internal oblique (IO), and erector spinalis (ES) regions. Significant differences were identified using a paired t-test and a one-way analysis of variance (ANOVA) analysis. Result : In the sprinter combined pattern, the muscle with the fastest onset time of contraction was the RES, and that with the slowest was the RRA (p<.001). In the skater combined pattern, the muscle with the fastest onset time of contraction was the LES, and that with the slowest was the LRA (p<.001). In the sprinter combined pattern, the REO and LIO presented medium muscle contraction onset times (p<.001). In the skater combined pattern, the LEO and RIO presented medium muscle contraction onset times (p<.001). Conclusions: Based on these results, these patterns could be used as exercise methods for the elderly with delayed proactive response speeds of the body stabilization methods due to imbalances in body stabilizing muscles or limbs movement.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.496-504
• /
• 2023

This paper recognizes the motion intention of the wearer using a muscle stiffness sensor and proposes a control system for a wearable robot based on this. The proposed system recognizes the onset time of the motion using sensor data, determines the assistance mode, and provides assistive torque to the hip flexion/extension motion of the wearer through the generated reference trajectory according to the determined mode. The onset time of motion was detected using the CUSUM algorithm from the muscle stiffness sensor, and by comparing the detection results of the onset time with the EMG sensor and IMU, it verified its applicability as an input device for recognizing the intention of the wearer before motion. In addition, the stability of the proposed method was confirmed by comparing the results detected according to the walking speed of two subjects (1 male and 1 female). Based on these results, the assistance mode (gait assistance mode and muscle strengthening mode) was determined based on the detection results of onset time, and a reference trajectory was generated through cubic spline interpolation according to the determined assistance mode. And, the practicality of the proposed system was also confirmed by applying it to an actual wearable robot.

• 한국전문물리치료학회지
• /
• 제10권1호
• /
• pp.51-62
• /
• 2003

The purpose of this study was to compare the relative accuracy of a range of computer-based analysis with respect to EMG onset determined visually by an experienced examiner. Ten healthy students (6 male, 4 female) were recruited and three times randomly selected trials of isometric contraction of wrist flexion and extension were evaluated using four technique. These methods were compared which varied in terms of EMG processing, threshold value and the number of samples for which the mean must exceed the defined threshold, and beyond 7% of maximum amplitude. To identify determination of onset time, ICCs(Intraclass Correlation Coefficients) was used and inter-rater arid intra-rater reliability ranged good in visually derived onset values. The results of this study present that in wrist flexion and extension, the reliability of the inter and intra-examiner muscle contraction onset times through visual analysis showed beyond .971 with ICCs. The reliability of the muscle contraction onset time decision through visual reading, tested with computer analysis, showed a relationship of all the selected analysis methods with ICCs .859 and .871. The objective computer-based analysis comparing with visual reading at the same time is the effective and qualitative data analysis method, considering the specificity of each study method.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.44-46
• /
• 2002

This study was conducted to identify the proper analytical conditions regarding optical density for endotoxin analysis in the workplace using metalworking fludis. Our study found the "onset method" was more accurate than "time to Vmax" Reproducibility and accuracy analyzed by "onset method" was more greater than those by "time to Vmax""0.03"of optical density was the most appropriate analytical condition among onset method. Through this analytical condition, 0.998 of linearity was obtained and recovery rate ranged from 88％ to 105％ at endotoxin concentration below 5 EU/$m\ell$. No significant difference of endotoxins between "0.03"and "0.05" of optical density was observed from this study. Furthermore, correlation coefficients between them were statistically significant(p＜0.01). This study concluded that 0.03”or "0.05" of optical density is used to analyze endotoxin. Of these optical density value, value with higher linearity should be used to analyze endotoxin in environmental samples.

• 지구물리와물리탐사
• /
• 제6권2호
• /
• pp.71-76
• /
• 2003

정확한 초동 발췌는 고해상 속도 토모그램 도출에 중요한 요소이다. 주시 발췌의 정확도에 영향을 주는 2가지 요인은 지질학적 요인과 기계적인 요인이 있다. 중요한 기계적인 요인은 발파시간 제어이다. 임펄시브형 시추공 탄성파 송신원에 의한 기록에서 다음과 같은 문제가 확인되었다. 즉, 불규칙한 발파시간 제어 문제와 기록에 나타난 발파시간의 불확실성이다. 이러한 발파시간 문제는 발췌된 초동에 정확도를 저하시키게 되며, 따라서 속도 토모그램을 왜곡시키게 된다. 본 연구에서는 수평방향의 속도와 NMO 속도를 반복적으로 비교함으포써 최적의 발파시간을 산출하는 방법을 제시하였다.

• 음성과학
• /
• 제9권1호
• /
• pp.17-26
• /
• 2002

Voice onset time (VOT) is defined as the time interval from the oral release of a stop consonant to the onset of glottal pulsing in the following vowel. VOT is a temporal characteristic of stop consonants that reflects the complex timing of glottal articulation relative to supraglottal articulation. There have been many reports on efforts to clarify the acoustical and physiological properties that differentiate the three types of Korean stops, including acoustic, fiberscopic, aerodynamic and electromyographic studies. In the acoustic and fiberscopic studies for stop consonants, the voice onset time and glottal width during the production of stops has been known as the longest and largest in the heavily aspirated type followed by the slightly aspirated type and unaspirated types. The thyroarytenoid and posterior cricoarytenoid muscles were physiologically inter-correlated for differentiating these types of stops. However, a review of the English literature shows that the fine movement of the mucosal edges of the vocal folds during the production of stops has not been well documented. In recent. years, a new method for high-speed recording of laryngeal dynamics by use of a digital recording system allows us to observe with fine time resolution. The movements of the vocal fold edges were documented during the period of stop production using a fiberscopic system of high speed digital images. By observing the glottal width and the visual vibratory movements of the vocal folds before voice onset, the heavily aspirated stop was characterized as being more prominent and dynamic than the slightly aspirated and unaspirated stops.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.56-63
• /
• 2006

This study examined the effects of the abdominal drawing-in (ADI) maneuver using a pressure biofeedback on muscle recruitment pattern of erector spinae and hip extensors and anterior pelvic tilt during hip extension in the prone position. Fourteen able-bodied volunteers, who had no medical history of lower extremity or lumbar spine disease, were recruited for this study. The muscle onset time of erector spinae, gluteus maximus, and medial hamstring and angle of anterior pelvic tilt during hip extension in prone position were measured in two conditions: ADI maneuver condition and non-ADI maneuver condition. Muscle onset time was measured using a surface electromyography (EMG). Kinematic data for angle of anterior pelvic tilt were measured using a motion analysis system. The muscle onset time and angle of anterior pelvic tilt were compared using a paired t-test. The study showed that in ADI maneuver during hip extension in prone position, the muscle onset time for the erector spinae was delayed significantly by a mean of 43.20 ms (SD 43.12), and the onset time for the gluteus maximus preceded significantly by a mean of -4.83 ms (SD 14.10) compared to non-ADI maneuver condition (p<.05). The angle of anterior pelvic tilt was significantly lower in the ADI maneuver condition by a mean of 7.03 degrees (SD 2.59) compared to non-ADI maneuver condition (15.01 degrees) (p<.05). The findings of this study indicated that prone hip extension with the ADI maneuver was an effective method to recruit the gluteus maximus earlier than erector spinae and to decrease anterior pelvic tilting.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.279-285
• /
• 2011

본 논문에서는 비정상열선법을 이용한 나노유체의 열전도도 측정시, 자연대류 개시점을 수치적 방법을 통하여 파악해 보았다. 측정 유체는 부피비 1, 4, 10% 를 갖는 물-기반 알루미나 나노유체이고, 이에 대한 물성치는 기존 이론모델 및 실험적 상관관계식을 이용하여 계산하였다. 비정상열선법 장치는 FDM 방식으로 모델링 되었으며, 자연대류의 개시점은 중력장하의 열선의 온도변화를 관찰함으로써 파악하였다. 자연대류의 개시점은 물의 경우 11.5 초이고, 10% 부피비에서 Maxwell 모델로 열전도도를 예측한 알루미나 나노유체인 경우 41.6 초로 계산되었다. 특히 부피비가 증가할수록 자연대류가 늦게 발생함을 확인하였으며, 계산된 결과를 이용하여 비정상열선법의 실린더 내부에서 나노유체의 자연대류 개시점을 예측할 수 있는 관계식을 제시하였다. 또한 비정상열선법으로 열전도도를 측정할 때, 기본유체의 자연대류 발생시점 이전에 측정이 이루어진다면 나노유체의 열전도도 측정시 자연대류에 의한 측정오차는 무시할 수 있음을 확인하였다.