• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.3
• /
• pp.124-130
• /
• 2014

Onlay bone grafting, guided bone regeneration, and alveolar ridge split technique are considered reliable bone augmentation methods on the horizontally atrophic alveolar ridge. Among these techniques, alveolar ridge split procedures are technique-sensitive and difficult to perform in the posterior mandible. This case report describes successful implant placement with the use of piezoelectric hinge-assisted ridge split technique in an atrophic posterior mandible.

• Journal of Trauma and Injury
• /
• v.35 no.1
• /
• pp.46-50
• /
• 2022

Traumatic flank hernia (TFH) is rare and prone to recurrence, which makes appropriate treatment challenging. No current guidelines define the optimal timing and method of repair. Meanwhile, recent advances in laparoscopic techniques are reshaping the options for the treatment of TFH. A dual approach that utilizes both laparoscopic and open methods has not previously been reported. Herein, we present the successful treatment of TFH after blunt trauma. A 46-year-old male patient underwent elective herniorrhaphy on hospital day 3, in which laparoscopic implantation of a sublay mesh and extracorporeal implantation of an onlay mesh were performed. Such techniques may be appropriate and result in feasible outcomes in hemodynamically stable patients with large TFH who are strongly suspected of having bowel herniation or concomitant intraperitoneal injuries. Larger studies are needed to assess the long-term results.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.363-372
• /
• 1997

One hundred forty-four patients underwent operation for coarctation of the aorta at Seoul National University Children's Hospital between June 1986 and Decembsr 1995. Age ranged 0.1 to 191 months. Of these 78.5%(113) were infants. We classified the patients in terms of the anatomic location of coarctatiln and the associatCd anomalies(I[401= primary coarctation, 11(741=isthmic hypoplasia, lIIf30)=tubular hypoplasia involving transverse arch, Ar63 =with ventricular septal defect, B(28)=with other major cardiac defects). Subcalvian flap coarctoplasty(60), resection & anastomosis(44), extended aortoplasty(26), and onlay patch(14) were used as surgical methods. Overall operative mortality was 16.0(23/144)%. The hospital mortality was signific'antly higher in patheints with type 111, subtype B, younger age(under 3 months), extended aortoplasty(p(0.01). However, one-stage total repair in patients with subtype A or B were not found to be a predictor of hospital death. Restenosis had occured in 18 patients among 121 survivals(14. 9%). The mean follow-up period was 29.1 $\pm$28.8(0~129.2) months. Preoperative, immediate postoperative(within 3 months after operation) and postoperative(later than 6 months after operation) echocardiographic data on the dimensions of ascending aorta(AA), transverse arch(TA), an4 aortic isthmus(Al) were available in 77 patients(I=20, ll=42, 111= 15). Preoperative and postoperative aortic isthmus(All) and tra sverse arch indices(TAI), defined as TAIAA & AIIAA respectively, were compared. Immediate postoperative All in type 1, II and TAI in type 111 were significantly smaller in stenotic than non-stenotic group suggesting incomplete relieves of stenotic segment Younger age, subclavian coarctoplasty in patient under 3 months of age were round to be the risk factors for restenosis in this series. In conclusion, We found that aortic arch index and transverse arch index can be a useful tool to figure out the anatomic and clinical characteristics of the patients with aortic coarctation, and that anatomy, associated anomalies, age, and surgical methods may influence the surgical outcome of the coarctation repair.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.330-333
• /
• 2009

Alveolar bone resorption after extraction impairs the necessary bone volume and complicates the case for implant surgery and aesthetic implant prosthesis. Immediate implant surgery after extraction decreases the number of surgical procedures and the duration of treatment, while allowing minimum alveolar bone resorption and preserving the residual bone volume. Although immediate implant holds many advantages such as preservation of hard and soft tissue around the extraction socket, greater implant survival rate and higher patient satisfaction, various complications and high failure rate are discouraging factors for the clinicians. In this case report, severe alveolar bone resorption with soft tissue changes were predicted after the extraction of prolonged retained deciduous incisors and impacted maxillary canines and thus decided on immediate implant procedure. Immediate implant surgery after extraction was carried out with minimal bone reduction and tapered wide-neck implant to establish initial stability. Simultaneous bone graft was done by filling the defect area with iliac cancellous bone with additional onlay-type bone graft and absorbable membrane on the labial bone for upper lip support. A stable and esthetic result was obtained with shortened treatment period.

• Journal of Periodontal and Implant Science
• /
• v.50 no.2
• /
• pp.106-120
• /
• 2020

Purpose: A new form of porous polyethylene, characterized by higher porosity and pore interconnectivity, was developed for use as a tissue-integrated implant. This study evaluated the effectiveness of porous polyethylene blocks used as an onlay bone graft in rabbit mandible in terms of tissue reaction, bone ingrowth, fibrovascularization, and graft-bone interfacial integrity. Methods: Twelve New Zealand white rabbits were randomized into 3 treatment groups according to the study period (4, 12, or 24 weeks). Cylindrical specimens measuring 5 mm in diameter and 4.5 mm in thickness were placed directly on the body of the mandible without bone bed decortication, fixed in place with a titanium screw, and covered with a collagen membrane. Histologic and histomorphometric analyses were done using hematoxylin and eosin-stained bone slices. Interfacial shear strength was tested to quantify graft-bone interfacial integrity. Results: The porous polyethylene graft was observed to integrate with the mandibular bone and exhibited tissue-bridge connections. At all postoperative time points, it was noted that the host tissues had grown deep into the pores of the porous polyethylene in the direction from the interface to the center of the graft. Both fibrovascular tissue and bone were found within the pores, but most bone ingrowth was observed at the graft-mandibular bone interface. Bone ingrowth depth and interfacial shear strength were in the range of 2.76-3.89 mm and 1.11-1.43 MPa, respectively. No significant differences among post-implantation time points were found for tissue ingrowth percentage and interfacial shear strength (P>0.05). Conclusions: Within the limits of the study, the present study revealed that the new porous polyethylene did not provoke any adverse systemic reactions. The material promoted fibrovascularization and displayed osteoconductive and osteogenic properties within and outside the contact interface. Stable interfacial integration between the graft and bone also took place.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.383-390
• /
• 2011

Purpose: To correct the upper lip depression after the correction of unilateral cleft lip, autologous grafts such as bone, dermal, fascial grafts and fat injections or alloplastic implants are used. Transplanted bones, dermis and fascia have a tendency to be absorbed and have donor morbidity. Fat injections are absorbed inconsistently and alloplastic implants have problems such as foreign body reactions, protrusions and infections. Authors corrected the upper lip depression using conchal cartilage graft in unilateral cleft lip deformity and the results was analysed with photos. Methods: 26-unilateral cleft lip and 2-microform cleft lip cases, totally 28 cases were performed. Their mean age was 21.89 years. The male and female cases were 12 and 16, respectively. Under anesthesia (general: 18 cases and local: 10 cases), cavum conchae (n=8), cymba conchae (n=16) and whole conchae (n=4) were harvested. Transversely cut the margin of the obtained cartilage, we cut out the most bent portion and put a partial-thickness incision on concave surface in cases of excessive convexity. Then, we performed the onlay graft of the conchal cartilage via scar revision site in unilateral cleft lip and via the reconstruction site of the cupid bow in microform cleft lip. The augmentation of the upper lip was evaluated with photos. Adapting the baseline connecting between the both cheilions as a horizontal standard line, we measured the highest point among the tangents between the upper lip and nose (point a), the lowest point (point c), the middle point between a and c (point b) and the vertical line from the alare (point d) to the horizontal standard line. To assess the postoperative symmetry, we compared cleft side upper lip contour index (%) A,B,C,D=(a,b,c,d)-ch ${\times}$ 100/(ch-ch) and non-cleft side upper lip contour index (%) A',B',C',D'= (a',b',c',d')-ch ${\times}$ 100 / (ch-ch).h) Results: After the surgery, no complication was found except in one case which double layers graft performed in the cleft lip deformity, the lateral portion was protruded. The upper lip contour index, the difference of A and A' were-0.83%, and thus the mild depression was persisted. Difference of B and B', C and C', D and D' were 0.83%, 1.07%, 0.90%. There were statistically significant difference, and thus the depression of upper lip were improved generally. Conclusion: Authors performed the onlay graft of the conchal cartilage in unilateral cleft lip deformity and found that the depression of the upper lip was well corrected except the uppermost part when photogrammetrically analyzed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.2
• /
• pp.166-172
• /
• 1998

Missing of the upper posterior dentition can cause alveolar bone resorption & pneumatization of Maxillary sinus wall, which makes traditional implant placement impossible, The solution includes various methods to the posterior maxilla to provide adequate bone support for implant installation and long-term survival. -- sinus floor elevation, sinus-lift graft, inlay graft using LeFort I osteotomy, onlay graft, This is a clinical Sr. retrospective study on implant surgery & prosthodontic restoration with upper edentulous posterior jaw from Jan. 1990. to Jun. 1997 at implant clinic of Chonbuk National University Hospital. The results obtained were as follows: 1. Six hundred ninety-nine implants were placed on upper posterior jaw of two hundred seventeen patients, among them one hundred sixty-five implants were placed in forty-four patients with sinus lift. 2. The height of the remained alveolar bone was classified on the base of Misch's concept. This included seventy-nine SA-1s, ninety-seven SA-2s, sixty-five SA-3s and sixty SA-4s. 3. Ninety percent of implants were successfully integrated in non-grafted area and eighty-seven percent of implants were successully integrated in sinus lift area.

• Journal of Trauma and Injury
• /
• v.25 no.2
• /
• pp.63-66
• /
• 2012

Resection of the bowel is necessary for the repair of a ventral hernia after recovery from trauma in some cases. In such instances, polyester or polypropylene meshcannot be used due to the possibility of infection; we had to use biological mesh instead. We report a case in which a traumatic hernia was repaired with Permacol (Covidien, Norwalk, CT, USA). A 42-year-old male patient had been injured by a factory machine seven months prior to admission. At that time, he had abdominal wall injury and small bowel perforation. His abdominal wall had been a defect after operation. A CT scan of the abdomen showed that the left abdominal wall, which is lateral to left rectus abdominis muscle had only one muscle layer, an external oblique muscle, and that a previous abdominal incision had a defect along the entire incision. During the exploration, 10 cm of small bowel was removed due to firm adhesion to the previous surgical scar. Permacol mesh was applied and fixed with transfascial fixations and tacks by using the intraperitoneal onlay mesh technique. There were no complications after the surgery and the patient was discharged without any problems.