• 지능정보연구
• /
• 제24권3호
• /
• pp.1-19
• /
• 2018

최근 딥러닝은 오디오, 텍스트 및 이미지 데이터와 같은 비 체계적인 데이터를 대상으로 다양한 추정, 분류 및 예측 문제에 사용 및 적용되고 있다. 특히, 의류산업에 적용될 경우 딥러닝 기법을 활용한 의류 인식, 의류 검색, 자동 제품 추천 등의 심층 학습을 기반으로 한 응용이 가능하다. 이 때의 핵심모형은 합성곱 신경망을 사용한 이미지 분류이다. 합성곱 신경망은 입력이 전달되고 출력에 도달하는 과정에서 가중치와 같은 매개 변수를 학습하는 뉴런으로 구성되고, 영상 분류에 가장 적합한 방법론으로 사용된다. 기존의 의류 이미지 분류 작업에서 대부분의 분류 모형은 의류 이미지 자체 또는 전문모델 착용 의류와 같이 통제된 상황에서 촬영되는 온라인 제품 이미지를 사용하여 학습을 수행한다. 하지만 본 연구에서는 통제되지 않은 상황에서 촬영되고 사람들의 움직임과 다양한 포즈가 포함된 스트릿 패션 이미지 또는 런웨이 이미지를 분류하려는 상황을 고려하여 분류 모형을 훈련시키는 효과적인 방법을 제안한다. 이동성을 포착하는 런웨이 의류 이미지로 모형을 학습시킴으로써 분류 모형의 다양한 쿼리 이미지에 대한 적응력을 높일 수 있다. 모형 학습 시 먼저 ImageNet 데이터셋을 사용하여 pre-training 과정을 거치고 본 연구를 위해 수집된 32 개 주요 패션 브랜드의 2426개 런웨이 이미지로 구성된 데이터셋을 사용하여 fine-tuning을 수행한다. 학습 과정의 일반화를 고려해 10번의 실험을 수행하고 제안된 모형은 최종 테스트에서 67.2 %의 정확도를 기록했다. 본 연구 모형은 쿼리 이미지가 런웨이 이미지, 제품 이미지 또는 스트릿 패션 이미지가 될 수 있는 다양한 분류 환경에 적용될 수 있다. 구체적으로는 패션 위크에서 모바일 어플리케이션 서비스를 통해 브랜드 검색을 용이하게 하는 서비스를 제공하거나, 패션 잡지사의 편집 작업에 사용되어 브랜드나 스타일을 분류하고 라벨을 붙일 수 있으며, 온라인 쇼핑몰에서 아이템 정보를 제공하거나 유사한 아이템을 추천하는 등의 다양한 목적에 적용될 수 있다.

• Radiation Oncology Journal
• /
• 제21권4호
• /
• pp.299-305
• /
• 2003

목적: 후두암 방사선치료의 표준화를 위하여 후두암에 관한 기본적인 임상 자료를 축적하고 필요한 조사 항목을 결정하여 전국적인 웹 기반 데이터 베이스 시스템을 개발하고자 하였다. 대상 및 방법: 1998년 1월부터 1999년 12월까지 호서호남 지역에서 후두암으로 진단되어 방사선치료를 받은 환자를 대상으로 임상적 분석을 시행하였다. 환자 선정 기준은 18세 이상이며 과거력상 타 장기의 암 진단 병력이 없고 후두에서 기원한 원발성 상피세포암으로 과거 후두에 대한 다른 질환으로 치료력이 없는 환자를 대상으로 하였다. 후두암에 관한 조사 항목 개발은 대한방사선종양학회 호서호남지회 소속 병원의 전문의들이 합의하여 일차적으로 선정한 항목에 대하여 각 병원에서 자체적으로 조사하였다. 통계처리는 SPSS v10.0을 이용하였다. 결과: 자료가 수집된 총 증례수는 45예이었다. 환자의 연령분포는 28$\~$88세(중앙값: 61)이었고 남녀비는 10 대 1로 대부분 남자에 발생하였다. 원발부위는 성문암이 28예(62$\%$), 성문상부암이 17예(38$\%$)이었다. 병리소견으로는 편평세포암이 대부분이었다(44/45, 98$\%$). AJCC (1997년도) 병기 I+II는, 성문암 28예 중 24예(86$\%$)에 비해 성문상부암의 경우는 16예 중 8예(50$\%$)이었다(p=0.002). 증상은 애성이 n예(89%$\%$로 가장 많았다. 진단은 간접후두경이 전체환자에서, 직접후두경검사는 43예(98$\%$)에서 각각 시행되었다. 치료로서 성문암 28예와 성문상부암 17예 중, 방사선 단독치료는 21예(75$\%$), 6예(35$\%$)에서 각각 시행되었다. 또한 수술요법과 방사선요법의 병용은 각각 5예(18$\%$), 8예(47$\%$)이었고, 항암화학요법과 방사선요법의 병용치료는 각각 2예(7$\%$), 3예(18$\%$)이었으나 두 원발 병소 간에 병용치료 빈도의 유의한 차이는 없었다(p=0.20). 방사선치료는 모두 선형가속기 6 MV X-ray를 이용하여 통상적 분할조사 법으로 시행되었다. 분할선량은 성문암 환자의 86$\%$에서 2.0 Gy를 사용한 반면 성문상부암은 59$\%$에서 1.8 Gy를 각각 사용하였다. 방사선단독치료를 완료한 환자에서 원발병소의 평균 총방사선량은 성문암에서 65.98 Gy, 성문상부암에서 70.15 Gy이었다. 수집된 자료를 기초로 후두암 방사선치료형태 연구에 필요한 총 12개의 모듈과 90개의 항목을 개 발하였다. 결론: 본 연구에서는 후두암 데이터베이스 시스템에 필요한 연구 항목을 개발하였다. 향후 웹 기반 데이터 베이스 시스템을 완성하고 전국의 방사선치료 자료를 축적하여 후두암에 대한 한국형 방사선치료의 표준화 및 적정화를 기하고자 한다.

• 지능정보연구
• /
• 제24권2호
• /
• pp.221-241
• /
• 2018

최근 딥러닝 기술이 주목을 받고 있다. 대중들의 관심을 받았던 국제 이미지 인식 기술 대회(ILSVR)와 알파고(AlphaGo)에서 사용된 딥러닝 기술이 바로 합성곱 신경망(CNN; Convolution Neural Network)이다. 합성곱 신경망은 입력 이미지를 작은 구역으로 나누어 부분적인 특징을 인식하고 이것을 결합하여 전체를 인식하는 특징을 가진다. 이러한 딥러닝 기술이 우리의 생활에 있어 많은 변화를 야기할 것이라는 기대를 주고 있지만 현재까지는 이미지 인식과 자연어 처리 등에 그 성과가 국한되어 있다. 비즈니스 문제에 대한 딥러닝 활용은 아직까지 초기 연구 단계로 향후 마케팅 응답 예측이나 허위 거래 식별, 부도 예측과 같은 전통적 비즈니스 문제들에 대해 보다 깊게 활용되고 그 성능이 입증된다면 딥러닝 기술의 활용 가치가 보다 더 주목받게 될 것으로 기대된다. 이러한 때 비교적 고객 식별이 용이하고 활용 가치가 높은 빅데이터를 보유하고 있는 전자상거래 기업의 사례를 바탕으로 하여 딥러닝 기술의 비즈니스 문제 해결 가능성을 진단해보는 것은 학술적으로 매우 의미 있는 시도라 할 수 있겠다. 이에 본 연구에서는 전자상거래 기업의 고객 행태 예측력을 높이기 위한 방안으로 합성곱 신경망을 활용한 '이종 정보 결합(Heterogeneous Information Integration)의 CNN 모델'을 제시한다. 이는 정형과 비정형 정보를 결합하여 다층 퍼셉트론 구조의 합성곱 신경망에서 학습시키는 모델로서 최적의 성능을 발휘하도록 '이종 정보 결합'과 '비정형 정보의 벡터 전환', 그리고 '다층 퍼셉트론 설계'로 하는 3개의 내부 아키텍처를 정의하고 각 아키텍처 단위로 구성되는 방식에 따른 성능을 평가하여 그 결과를 바탕으로 제안 모델을 확정하고 그 성능을 평가해보고자 한다. 고객 행태 예측을 위한 목표 변수는 전자상거래 기업에서 중요하게 관리하고 있는 재구매 고객, 이탈 고객, 고빈도 구매 고객, 고빈도 반품 고객, 고단가 구매 고객, 고할인 구매 고객 등 모두 6개의 이진 분류 문제로 정의한다. 제안한 모델의 유용성을 검증하기 위해서 국내 특정 전자상거래 기업의 실제 데이터를 활용하여 실험을 수행하였다. 실험 결과 정형과 비정형 정보를 결합하여 CNN을 활용한 제안 모델이 NBC(Naïve Bayes classification)과 SVM(Support vector machine), 그리고 ANN(Artificial neural network)에 비해서 예측 정확도와 F1 Measure가 높게 평가되었다. 또 NBC, SVM, ANN에서 정형 정보만을 사용할 때 보다 정형과 비정형 정보를 결합하여 입력 변수로 함께 활용한 경우에 예측 정확도가 향상되는 것으로 나타났다. 따라서 실험 결과로부터 비정형 정보의 활용이 고객 행태 예측의 정확도 향상에 기여한다는 점과 CNN 기법의 특징 추출 알고리즘이 VOC에 사용된 단어들의 분포와 위치 정보를 해석하여 문장의 의미를 파악하는데 효과적이라는 점을 실증적으로 확인하였다는데 그 의미가 있다고 할 수 있겠다. 이를 통해서 CNN 기법이 지금까지 소개된 이미지 인식이나 자연어 처리 분야 외에 비즈니스 문제 해결에도 활용 가치가 높다는 점을 확인하였다는데 이 연구의 의의가 있다 하겠다.

• 마케팅과학연구
• /
• 제18권4호
• /
• pp.61-118
• /
• 2008

본 연구는 국내외 프랜차이즈의 해외진출에 대한 연구들을 바탕으로 국제프랜차이징연구의 전체적인 연구체계를 세워보고, 연구체계를 형성하고 있는 연구요인들을 확인하여 각 연구요소별로 이루어지는 연구주제와 내용을 살펴보고, 앞으로의 연구주제들을 제안하고자 한다. 주요한 연구요소들은 국제프랜차이징의 동기 및 환경 요소과 진출의사결정, 국제프랜차이징의 진입양식 및 발전전략, 국제프랜차이징의 운영전략 및 국제프랜차이징의 성과이다. 이외에도 국제프랜차이징 연구에 적용할 수 있는 대리인이론, 자원기반이론, 거래비용이론, 조직학습이론 및 해외진출이론들을 설명하였다. 또한 국제프랜차이징연구에서 보다 중점적으로 개발해야 할 질적, 양적 방법론을 소개하였으며, 마지막으로 국내연구의 동향을 정리하여 추후의 연구방향을 종합적으로 정리하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제23권3호
• /
• pp.247-268
• /
• 1996

여포와 난포의 성숙, 배란과 착상, 임신의 유지와 태아의 성장 발달, 분만 및 유선발육과 비유 등 일련의 생식현상에서 있어서 성선자극호르몬과 스테로이드 호르몬의 작용이 중추적인 역할을 한다는 사실은 오래 전부터 알려져왔다. 그러나 이러한 일련의 현상에 고전적인 호르몬 외에도 다수의 성장인자가 관여되고 있음이 최근의 연구 결과 밝혀지고 있다. 생식기관에서 성장인자들은 대부분 autocrine/paracrine mode로 작용하여, 성선자극호르몬과 스테로이드 호르몬의 작용을 매개하거나 이들 호르몬 등과 교호적인 작용(synergy)을 한다. 생식기관 내 insulin-like growth factor(IGF) system은 최근 가장 활발히 연구된 분야 중의 하나로 생식현상의 전반에 걸쳐 중요한 역할을 하고 있음이 밝혀졌다. 본 지면에서는 IGF system에 관한 개괄적인 정보를 소개하고 현재까지 보고된 intrauterine IGF system에 관한 연구를 요약하고자 한다. IGF family는 IGF-I과 IGF-II ligands, 두종류의 IGF receptors(수용체), 그리고 지금까지 발견된 6종류의 IGF-binding proteins(IGFBPs)로 이루어져 있다. IGF-I과 IGF-II는 proinsulin과 상동한 구조를 가진 peptide로서 포도당과 아미노산 운반을 자극하는 등 insulin과 유사한 작용을 한다. 이 외에도 IGFs는 세포분열촉진제(mitogens)로서 여러 형태의 세포에 걸쳐 세포증식을 자극하고, 세포의 분화(differentiation)과 세포기능의 발현에 관여한다. IGFs는 간과 주로 messenchymal cells에서 발현되어 endocrine mode는 물론 autocrine/paracrine mode로 거의 모든 조직에 작용한다. IGF 수용체는 두종류가 알려져 있는데 type I IGF receptor는 tyrosine kinase로서 IGF-I과 IGF-II에 공히 high-affinity를 나타내고, 상기한 대부분의 IGFs의 작용을 매개한다. Type II IGF receptor 혹은 IGF-II/mannose-6-phosphate receptor는 두개의 서로 다른 binding sites를 가지고 있는데 IGF-II binding site는 IGF-II에만 high-affinity를 나타낸다. Type II IGF receptor의 주요 역할은 IGF-II를 lysosomal targeting하여 ligand를 파괴하는데 있다. 체액 속의 IGFs는 대부분 IGFBP에 결합되어 있다. IGFBPs는 IGF의 저장/운반체 혹은 IGF 작용을 조절하는 역할을 하는 것으로 알려져 있으나 개개 IGFBP의 역할에 대해서는 지극히 제한된 정보만이 알려져 있다. IGFBPs의 IGF ligands에의 affinity는 IGF receptors의 IGFs에의 affinity보다 크기 때문에 대부분의 in vitro 상황 하에서 IGFBPs는 IGF 작용을 억제한다. IGFBP에 결합되어 있는 IGF가 어떤 기작에 의해 IGFBP로부터 분리되어 IGF receptor에 도달하는지는 알려지지 않고 있으나, 혈액과 조직액에 들어있는 불특정 IGFBP protease activity는 IGF의 방출과정에서 일역을 하는 것으로 믿어지고 있다. 최근 연구보고에 의하면 특정 in vitro 상황 하에서 IGFBP-1, -3, -5 등은 IGF와 무관한 작용도 있다는 증빙이 있어 IGF system의 또 다른 차원을 예고하고 있다. IGF family members의 mRNAs & proteins는 영장류, 설치류 및 가축의 자궁조직과 수태물(conceptus)에서 발현되어 자궁과 태아의 성장 발달에 중요한 역할을 한다. 자궁조직의 IGF system의 발현은 성선호르몬, 국소 생리조절인자 등에 의해 발현시기와 장소의 특이성이 결정되며, 발현된 IGFs와 IGFBPs는 autocrine/paracrine mode로 자궁조직에 작용하기도 하고, 자궁강에 분비되어 수태물의 성장 발달에 관여한다. 착상을 전후하여 수태물에서도 IGF system이 발현되는데 개개 IGF family member의 발현 시기는 모체로부터 유래된 mRNA의 유무, 수태물 자체의 genetic programming, 모체와의 상호작용 등에 의해 결정되고, IGFs의 작용 부위 역시 시간(생리적 상태)과 장소의 특이성이 있다. 이와같이 conceptus IGF system의 발현이 시간적, 공간적으로 조절되고있다는 사실은 IGFs가 수태물의 성장 발달에 일역을 한다는 가설을 간접적으로 지지해 준다. 자궁조직과 수태물에서 발현된 IGFs는 세포의 증식과 분화, 포도당과 아미노산의 운반과 단백질합성, placental lactogen과 prolactin 등과 같은 유선자극호르몬의 생성을 자극하고 스테로이드 호르몬의 합성에도 관여한다. 태아의 성장 발달에 있어서 IGFs의 역할은 embryo의 IGF-I, IGF-II, 혹은 IGF receptor gene을 homologous recombination technique에 의해 파괴(gene targeting)하여을 때의 결과로써 입증되었다. 생쥐의 IGF and/or IGF-II gene 혹은 IGF receptor gene을 파괴했을 때 출생 전후 모두 성장 발달이 지연되며 출생시 무게는 정상치의 30-60% 수준에 머물고, 특히 type I IGF receptor gene 혹은 IGF-I과 IGF-II genes를 모두 파괴했을 경우에는 출생 후 곧 치사한다. 자궁 내의 IGFBPs는 IGF ligands를 자궁 내에 제한시키거나 IGFs의 receptor binding을 억제하는 negative regulators 역할을 하는 것으로 믿어지고 있다. 그러나 영장류의 자궁에서 IGFBP-I과 같은 특정 IGFBP는 IGFs보다 월등히 많은 양이 발현 분비되고 있는 것으로 추산되고 있으며, 또한 이 단백질은 모체탈락막세포에서 분비되는 주요 단백질 중의 하나라는 점을 감안할 때 IGFBP-I이 IGF과 무관한 작용이 있을 가능성도 배제할 수 없다. 따라서 IGFBPs의 역할 규명은 IGF system을 이해하는데 중요한 부분을 차지하고 있어 향후 이 분야의 연구에 많은 기대와 촛점이 모여지고 있다.

• 한국산림과학회지
• /
• 제25권1호
• /
• pp.13-47
• /
• 1975

대나무류(類)는 열대방지(熱帶方地)에서 총생(叢生)하는 대형(大型)의 대나무가 많고, 온대(溫帶)가 되면 소형(小型)의 세류(笹類)로 퇴화(退化)하여, 그 종류(種類)는 세계(世界)에 50속(屬) 1,000여종(餘種)이나 있다고하여 그 종류수(種類數)는 대단(大端)히 많다. 이와 같은 대나무는 동양(東洋)에서는 건엽용(建葉用)과 공예용(工藝用)으로 이용(利用)되고있으며, 또한 죽순(竹筍)은 식용(食用)으로서 특유(特有)한 맛이있어 상용(賞用)되고있을 뿐만아니라 최근(最近)에는 세류(笹類)의 액즙(液汁)이 암(癌)에도 효과(効果)가 있다고 하여 중요(重要)한 산업(産業)으로서 발달(發達)하게되었다. 그리고 동남아(東南亞)에서는 삽목(揷木)으로서 용이(容易)하게 증산(增産)하여 pulp재(材)로 사용(使用)하게되여 대단(大端)히 중요시(重要視)하고있다. 이와같이 대나무는 인류생활(人類生活)에 필요부가결(必要不可決)한 목본식물(木本植物)이지만 아직까지 그 형태(形態)의 분류(分類)가 명확(明確)하게 되어 있지 않고 지연되여 있는 형편이다. 18세기(世紀) 중반기(中半期)의 Linne시대(時代)에 들어와서 생식기관(生殖器管)을 주체(主體)로 한 그 형태(形態)의 분류체계(分類體系)가 만들어진 이래(以來) 수정(修正)이 거듭되여온 바 있으나 대나무는 개화(開花)가 일정(一定)한 주기(周期)가 있어서 60-120년(年)의 기나긴 세월(歲月)이 소요(所要)되기 때문에 그의 형태적(形態的) 분류체계(分類體系)를 완성(完成)하는일은 극(極)히 어려운 일이었다. 오늘날까지 대나무에 관(關)한 많은 문헌(文獻)이 있기는 하나 그 시료(試料)가 적기때문에 불확실(不確實)한 기재(記載)도 많이있었고 속(屬)이 변경(變更)된것도 간혹(間或)있어서 그것을 공인(公認)할수 없는 것이 많이 있다. 그래서 내부(內部)의 형태적(形態的)인 분류(分類)에 관(關)하여는 근년(近年)에 이르러 중국(中國)의 Liese씨(氏)에 의(依)하여 겨우 시작(始作)이 되였으며, 또한 독일(獨逸)의 Grosser씨등(氏等)이 유관속(維管束)의 형태(形態)에 착안(着眼)하여 새로운 형태(形態)의 분류(分類)를 시도(試圖)한바있다. 그러나 이들의 이 형태(形態)에 관한 분류(分類)는 Holttum의 자방(子房)의 형태(形態)에 의(依)한 분류(分類)와 밀접(密接)한 관계(關係)가 있는것 뿐이었다. 따라서 필자(筆者)는 유관속초(維管束鞘)의 형태(形態)에 의(依)해 자유중국산(自由中國産)의 대나무 11속(屬) 26종류(種類)를 재료(材料)로하여 대나무의 형태(形態)에 관(關)한 분류체계(分類體系)에 대(對)하여 재고(再考)를 시도(試圖)하여 보았다. 그 결과(結果) Grosser씨(氏) 등(等)의 형태(形態)의 분류(分類)와 일부(一部)는 일치(一致)하였으나, Bambusa와 Dendrocalamus는 분류(分類)하기가 곤란(困難)하였던 것을 고립유관속초(孤立維管束鞘)의 존부(存否)로서 명확(明確)히 구별(區別)할수있었고 또한 종류(種類)가 많은 Bambusa를 2개(個)의 형(型)으로 나눌수가 있었다. 따라서 이 결과(結果)는 앞으로 아속(亞屬)이나 혹(或)은 절(節)로서의 분류(分類)로서 고려(考慮)되여야 할 문제(問題)라고 생각한다. 왜냐하면 이 근거(根據)는, 죽간(竹稈)의 최외층(最外層)에서 최내층(最內層)으로 향(向)하여 변화(變化)하고있는 형태(形態)에 착안(着眼)하여, 그 분화적(分化的)인 면(面)을 관찰(觀察)하였기 때문이다. 이 형태적(形態的)인 분화(分化)에 관(關)한 관찰(觀察)은 형태분류(形態分類)의 철칙(鐵則)인 "간단(簡單)한 것에서 복잡(複雜)한 것으로 진화(進化)한다"라고하는 철칙(鐵則)에 있어서도 충분(充分)히 조사(調査)하여 보았는데, 그 결과(結果)는 생식기관(生殖器官)의 형태적분류(形態的分類)와 대조(對照)하여 결정(決定)되어야 할 것이며, 금후(今後)의 문제(問題)로서 계속연구(繼續硏究)할까 생각한다.

• 동남아시아연구
• /
• 제27권2호
• /
• pp.37-76
• /
• 2017

베트남이 메콩 델타로 영토를 팽창하는 역사 속에서 완거정은 두 개의 얼굴을 갖는다. 하나는 현재 베트남 영토 내에 있는 메콩 델타 거의 전부를 획득하는 데서 그의 공헌이다. 또 하나는 베트남 역사를 읽는 독자들의 눈을 현재의 베트남 영역에만 머물게 하는 그의 역할이다. 독자들에게 완거정의 메콩 델타 획득은 베트남 남진사의 마지막 단계로 인식된다. 그러나 완거정의 업적은 부분적이었을 뿐이다. 이 연구는 메콩 델타에서의 영토 팽창 추이에서 완거정 보다 무왕에 주목한다. 무왕의 목표는 완거정의 공헌에 의해 성취된 영토 획득보다 더 야심적이었다. 그리고 이 야심은 새로운 세계, 새로운 국제 질서를 건설한다는 그의 꿈에 의해 추동된 것이며, 그가 건설한 수도 푸쑤언은 이 새 국제 질서의 중심지였다. 여기서 그는 황제가 되기를 희망했다. 주장을 입증하기 위해서 필자는 세 가지의 요소를 검토하고 있다. 첫째는 무왕 왕권의 성격이다. 두 번째는 메콩 델타에서의 군사 작전을 위한 준비 과정이다. 셋째는 새로이 무왕의 판도로 편입된 땅의 성격에 대한 것이다. 북부 홍하 델타에 근거한 레 황실의 신하를 자처하던 선대 지배자들의 태도와 결별하면서 무왕은 즉위한 지 6년 뒤인 1744년 자신이 왕임을 선포했다. 행정 조직이 개편되었고 의복과 풍속도 북부의 것을 버리고 남국의 것을 제정하였다. 무왕은 캄보디아, 참파, 수사, 화사, 만상, 남장 등 조공국도 충분히 확보했다. 레 왕조와 비교해 이 조공국의 숫자는 더 많았으며 19세기 대남 제국의 조공국 수와 맞먹었다. 필자는 이 시점에서 무왕이 실제로 원했던 자리는 왕이 아니라 황제였음을 지적한다. 비록 무왕의 시도는 실패했지만 그는 자신을 천왕이라고 칭함으로써 통상적인 왕은 아님을 분명히 했다. 캄보디아 왕이 캄보디아 영토 내의 참족을 공격한 게 무왕에게는 캄보디아에 개입하는 충분한 이유로 작용했다. 무왕은 이 참족이 자신의 신복이라 여겼다. 왕은 그들이 자신의 판도 내에 있는 참 즉 순성진 참인의 일부라고 간주했기 때문이다. 무왕은 1750년에 캄보디아에 전쟁을 선포했다. 동시에 그는 태국왕에게 외교 서한을 보냈는데 여기서 그는 캄보디아가 자신의 배타적 조공국임을 천명했다. 캄보디아의 영토였던 메콩 델타에의 공격을 개시하기 전에 무왕은 푸쑤언을 새로 건설해 제국의 위상에 걸맞는 권력중심지로 삼았다. 인플레이션, 기근, 경제 왜곡 등도 이 시기를 특징짓는 면모였다. 그러나 이 연구는 무왕의 메콩 델타 진출 이유라고 이야기되어 온 이런 경제적인 측면보다 제국 건설자로서 무왕이 보이던 적극적 정책에 더 관심을 가지며 이런 정책에 기초한 영토 팽창의 욕구가 메콩 델타의 광활한 땅을 차지하고자 하는 데 결정적인 이유가 되었다고 주장한다. 1754년부터 3년 동안 현재 베트남의 영토에 해당하는 메콩 델타 대부분이 무왕의 영토로 편입되었다. 여기에는 완거정의 역할이 컸다. 그러나 무왕이 차지하고자 한 영역의 범주는 여기에 더해 메콩 오른편에 해당하며 현재의 사이공보다 위쪽에 있는 껌뽕짬, 프레이비엥, 스바이리엥을 포괄했다. 많아진 조공국의 수에 걸맞게 제국의 영토는 넉넉히 확대되어야 했다. 무왕의 전략은 '잠식지계'와 '이만공만'의 변주곡이었다고 이 글은 주장한다. 무왕은 하부캄보디아에 해당하는 델타를 야금야금 차지했다. 이는 누에가 뽕잎을 먹는 것과 같다는 게 일반적인 이해 방식이다. 그러나 무왕의 최종적 목표는 위에서 언급한 메콩 델타 세 개의 주까지 다 먹어치우는 것이었다. '다 먹어치운다'는 건 '잠식'의 또 다른 의미이자 적용이었다. 무왕은 현 롱안 지역으로부터 쩌우독에 이르기까지의 땅을 차지하는 과정에서 참인을 이용해 캄보디아를 쳤다. 이것은 '이만공만'의 표준적 적용이었다. 이에 더해 그는 막씨가 관할하던 중국인 망명자들을 이용해 하띠엔과 그 주변 지역을 캄보디아 왕으로부터 취했다. '이만공만'의 또다른 적용이라고 할 수 있다. 결론적으로, 필자는 19세기에 출현할 응우옌 왕조의 제국 질서 뿌리를 바라보는 새로운 방식을 주장한다. 제국 질서는 홍하 델타에 근거한 대월 제국 왕조들의 오랜 역사의 결과물이 아니라 푸쑤언에 앉은 무왕의 신 세계질서를 계승한 것이라는 주장이다. '이만공만'과 '잠식지계'는 무왕의 후손들에게 여전히 유용했다. 그의 손자인 쟈롱은 타이, 크메르, 라오, 중국인, 산지민, 유럽인 같은 '만'을 이용해 또다른 '만'인 '떠이썬 도적떼(西賊)'를 이겼다. 떠이썬에는 수많은 중국인 및 중국 해적이 활동하고 있었으며 참인, 산지민이 있었다. 무왕의 증손자인 민망 황제는 화려한 제국을 건설했다. 동시에 그는 캄보디아와 참 영역을 몽땅 먹어치우면서 영토 확장에도 골몰하고 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국유통학회지:유통연구
• /
• 제17권2호
• /
• pp.63-92
• /
• 2012

본 연구는 소비자가 지각하는 유통업체의 위치기반 모바일 쇼핑정보 서비스에 대한 정보의 상황관련성과 정보자극에 대한 PAD 감정변수들(환기, 지배력, 즐거움) 간의 상호 인과관계와 이용의도에 대한 이들의 효과를 실증 연구 하였다. 미국 내 모바일 이용자를 대상으로 무작위 표본추출법에 근거하여 추출되었고, 총 335명의 사용가능한 응답이 수거되었다. 분석결과, 환기와 상황관련성은 즐거움에 정(+)의 영향을 주었으나 지배력은 즐거움에 유의한 영향력을 나타내지 않았다. 즐거움은 이용의도에 정(+)의 영향을 주었다. 본 연구를 통해 위치기반 모바일 서비스에 대한 소비자의 인지적 반응과 감정적 반응을 통합적으로 살펴보았으며, PAD 감정차원간의 체계적인 관계를 규명하였다. 연구결과를 바탕으로 모바일 쇼핑서비스 개발자, 유통업체, 그리고 마케팅 실무자를 위한 시사점을 논의하였으며, 연구의 한계점과 더불어 향후 연구 방향을 제시하였다.