In this study, two finite element (FE) models were developed to evaluate the thermal characteristics of a feeding axis of a CNC lathe. One was used for analysis of heat transfer to identify the temperature distribution of the feeding axis and then, the other was used for analysis of thermal deformation to evaluate its structural behavior based on the temperature distribution. The FE models were based on the test standard for the axial thermal displacement. The feeding velocity was composed of three steps: the ascending, constant, and descending velocities. Therefore, the heat generation and convection coefficient were calculated for each velocity and applied to the thermal FE model. The convection coefficient for the ball screw rotation was based on an experimental equation. The result of the analytical thermal displacement was compared with that of the experimental displacement to verify the finite element models.
As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG(Speckle Strain/Displacement Gage), ESP(Electronic Speckle Photography) and its 3-dimension version SDSP are investigated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.
As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG (Speckle Strain/Displacement Gage), ESP (Electronic Speckle Photography) and its 3-dimension version SDSP are evaluated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.
목 적 : 대퇴부의 고정을 위해 새로이 고안된 Ligament Anchor(LA) 나사와 슬괵건을 이용한 전방십자인대 재건술 후 임상결과와 골터널의 확장을 평가하고자 하였다. 대상 및 방법 : 슬괵건 4가닥과 LA 나사를 이용하여 전방십자인대 재건술 후 최소 2년 이상 추시 가능하였던 58예를 대상으로 하였다. 이식건의 고정으로 대퇴골측은 LA나사를, 경골측은 생흡수성 간섭나사를 이용하였다 평균 추시기간은 28개월이었다. 임상적 결과로는 Lachmann 검사와 Lysholm 점수를 이용하였으며 방사선학적 결과로는 골터널의 확대정도와 $Telos^{\circledR}$ 기기(Telos stress device; Austin & Associates, Inc., Polston, US)를 이용한 전방 전위 방사선 사진을 촬영하여 건측과의 전방이완도 차이를 평가하였다. 결과 : Lysholm 점수는 술 전 평균 60에서 술 후 평균 94.0점으로 호전되었으며, 술 전 Lachmann 검사상 16예에서 경도의 양성, 24예에서 중등도, 18예에서 고도의 양성 소견을 보였으며, 술 후 Lachmann 검사상 50예는 음성이었으며, 8예에서만 경도의 양성소견을 보였다. $Telos^{\circledR}$ 기기를 이용한 전방전위 검사상 건측과의 차이는 술전 평균 12.9mm에서 최종 추시상 3.1mm로 호전되었다(p<0.05). 대퇴 터널은 전후방 방사선 사진상 수술직후 10.6mm에서 최종 추시상 12.7mm$(21.1\%)$로 확장되었으며, 측면 방사선 사진상 술 후 10.7mm에서 최종 추시상 12.4mm$(16.5\%)$로 확장되었다(p<0.05). 경골 터널은 전후방 방사선 사진상 술 후 9.8mm에서 최종 추시상 11.8mm$(20.7\%)$로 확장되었으며 측면 방사선 사진상 술 후 9.9mm에서 최종 추시상 11.7mm$(18.9\%)$로 확장되었다(p<0.05). 결론 : LA나사와 슬괵건을 이용한 전방십자인대 재건술은 골터널의 확장이 적으며 임상 성적도 우수하여 슬관절의 전방 안정성을 회복하는데 좋은 이식물 및 내고정물이라 생각된다.
학생들이 사용한 세 가지 NiTi file systems (ProFile$^{(R)}$, Hero Shaper$^{(R)}$, K3$^{TM}$)을 사용하여 성형한 모형 근관의 apical terminus width를 비교하여 flute angle 및 pitch 혹은 radial land가 screw-in effect에 미치는 효과를 알아보고자 하였다. NiTi file의 사용 경험이 없는 부산대학교 치과대학 4학년 학생 50명이 세 종류의 NiTi file systems- Pro File$^{(R)}$ (Dentsply Maillefer, Ballaigues, Switzerland), K3$^{TM}$ (SybronEndo, Glendora, France), Hero Shaper$^{\circledR}$(Micromega, Besancon, France)-을 사용하여 각 system으로 하나의 근관씩, 모두 150 개의 레진 블락 근관모형 (Endo Training Bloc; Dentsply Maillefer, Ballaigues, Switzerland)을 16 : 1 감속 handpiece를 장착한 electric motor (Tecnika ATR, Pistola, Italy)를 사용하여 300 rpm의 속도에서 torque는 30 (Tecnikamotor setting value)으로 성형하였다. 스캐너로 근관 성형 전 후 이미지를 채득하여 중첩한 후 근단부의 최종 폭경을 측정하였다. 통계분석은 one-way ANOVA와 95% 신뢰도의 Scheffe's multiple range test로 사후 검증하였다. ProFile$^{(R)}$의 근관 성형 후 근단부의 폭이 Hero Shaper$^{(R)}$ and K3$^{TM}$에 비해 통계학적으로 유의하게 작았다. 본 연구의 결과에서 근단부의 과도한 확대가 variable pitch와 helical angle를 가진active file에 비해 con-stant pitch와 helical angle을 가짐에도 불구하고 radial land를 가진passive file에서 적게 나타났다. 이 결과로 추정해 볼 때, variable pitch와 helical angle보다는 근본적으로 radial land가 screw-in effect의 예방에 더 큰 역할을 하는 것으로 추정될 수 있다 따라서 NiTi file의 사용 경험이 없는 초심자의 경우 근단부 폭경의 유지능력이 좋은 ProFile$^{(R)}$의 사용이 추천된다.
The purpose of this study was to evaluate a new sampling and analytical method for the determination of hexavalent chromium, Cr(VI) in mist from field plating operation. The Procedures of this new method (Shin & Paik's Method) are as the following: Airborne hexavalent chromium is collected on polyvinyl chloride (PVC) filter according to the National Institute for Occupational Safety and Health (NIOSH) Method 7600, and the filter sample is placed in a screw-capped vial and soaked with 2% NaOH/3% Na₂CO₃ solution immediately after sampling. The Cr(VI) sample is analyzed by ion chromatography/visible spectrophotometry (IC/VS) according to the U.S. Environmental Protection Agency (EPA) Method 218.6. The airborne Cr(VI) concentrations measured by this method were compared with those determined by three reference methods: One (NIOSH/EPA Method) consisted of sampling airborne Cr(VI) on PVC filters and storing the sample filters in screw-capped vials according to the NIOSH method, and analyzing Cr(VI) in samples using IC/VS according to the EPA method. The second method (Impinger Method/NaHCO₃) consisted of absorbing airborne Cr(VI) into 0.02 MN/sub a/Hco₃ solution in midget impinger, and analyzing the Cr(VI) in samples using IC/VS. The third method was the OSHA Method Id-215. Using these four different methods, four replicates of air samples were collected at an electroplating process and analyzed simultaneously. Two-way ANOVA and Paired t-test were used to test difference among values determined by the methods. There was no significant difference and a strong correlation (r/sup 2/=0.99) between Cr(VI) concentrations measured by the shin & Paik's Method and an impinger method (p>0.05). However, Cr(VI) concentrations determined by Shin & Paik's Method were Significantly different form those by the NIOSH/EPA Method (p<0.05) or the OSHA method (p<0.05). The Cr(VI) concentrations of Shin & Paik's Method were Significantly higher than those of the NIOSH/EPA Method or the OSHA method. We concluded that the Shin & Paik's Method could prevent Cr(VI) losses caused by reduction and give more reliable results of airborne Cr(VI) concentrations in work environments.
목적 : 전방십자인대 손상 환자에서 슬괵건과 LA나사를 이용한 관절경적 전방십자인대 재건술을 시행하고 그 임상적 결과를 고찰하고자 한다. 대상 및 방법 : 1996년 3월부터 2001년 7월까지 슬괵건과 LA나사를 이용한 관절경적 전방십자인대 재건술을 시행받고 술 후 최소 2년이상, 최장 6년(평균 3년) 추시가 가능하였던 101면(104 예)를 대상으로 하였으며, 남자가 86명, 여자가 17명이었다 임상적 결과는 이학적 검사 및 Lysholm Knee score와 Telos기구를 이용한 술전, 술후 전방 전위정도를 측정하여 건측과 비교하여 안정성 여부를 측정하였다. 수술시 평균나이는 32세$(15\~61)$였다. 결과 : Lysholm Knee score는 술전 평균 57.9점이었으며 최종 추시상 평균 95.2점으로 증가하였다. 104예 전예에서 보조기 없이 보행이 가능하였으며, Lachman검사는 술전에는 경도(+)의 양성이 46예$(45\%)$, 중등도(++)의 양성이 33예$(31\%)$, 고도(+++)의 양성이 25$(24\%)$, 였으며, 술후 추시상 90예$(87\%)$에서 음성으로 전환되었으며 14예$(13\%)$에서 경도(+)의 양성이 관찰되었다. Pivot-shift 검사는 술전에 음성을 보인 경우가 22예$(22\%)$, 경도(+)의 양성이 62예$(59\%)$, 중등도(++)의 양성이 12예$(11\%)$, 고도(+++)의 양성이 8예$(8\%)$였으며, 술후 추시상 87예$(84\%)$에서 음성, 17예$(16\%)$에서 경도(+)의 양성을 보였다. Telos기구를 이용한 전방전위검사에서 20lb 검사상 정상 슬관절과의 차이가 술전 평균 $13.4{\pm}5.6 mm$에서 술후 추시상 평균 $3.6{\pm}1.5 mm$ 로 감소하여 전방 전위 안정성이 회복되었으며, 통계학적으로 유의한 차이를 보였다. 슬개골 주위 합병증으로는 대퇴사두고근 위축이 27예 $(26\%)$, 이식건 공여부위의 절개부의 감각이상이 19예$(18\%)$, 슬관절 운동시의 연발음이 13예$(13\%)$, LA 나사의 대퇴 외측 피질골 관통이 5예$(5\%)$에서 관찰되었다. 결론 : 슬괵건과 LA 나사를 이용한 관절경적 전방십자인대 재건술은 강한 고정력을 가져 슬관절의 기능적 안정성을 확보하는데 유용하며, 슬개골 주위 합병증이 적은 효과적인 수술방법으로 생각된다.
목적: 본 연구의 목적은 내부육각 연결형 임플란트에서 두 가지 지르코니아 지대주와 티타늄 지대주의 변연 및 내면 적합도를 비교하고자 하였다. 재료 및 방법: 티타늄 지대주와 두 종류의 지르코니아 지대주를 내부육각연결 구조형 임플란트(TSV, Zimmer)에 체결하였다. 기성 티타늄 지대주(Hex-Lock, Zimmer)를 대조군으로 하여, 기성 지르코니아 지대주(ZirAce, Acucera)와 copy milling 시스템(Zirkonzahn Max, Zirkonzahn)으로 제작한 맞춤형 지르코니아 지대주를 비교하였다. 임플란트 고정체에 30 Ncm의 토크로 지대주를 연결하였으며, 각 실험군 당 8개의 시편을 제작하였다. 아크릴 레진에 포매하여 절단시편을 제작한 후 주사전자현미경으로 고정체-임플란트 계면에서 변연간극과 내부육각 내면간극을 측정하고, 지대주 나사와 지대주 나사받침 사이 계면에서 수직 및 수평간극을 측정했다. 측정치는 일원배치분산분석과 Scheffe test로 통계 처리하였다(${\alpha}=0.05$). 결과: 맞춤형 지르코니아 지대주의 변연 간극은 두 가지 기성 지대주에 비해 컸다. 내부육각 내면간극은 맞춤형 지르코니아 지대주와 기성 지르코니아 지대주 사이에 유의차를 보이지 않았고 기성 티타늄 지대주보다 컸다. 기성 지르코니아 지대주의 지대주 나사 수직간극과 수평간극은 기성 티타늄 지대주보다 컸다. 맞춤형 지르코니아 지대주의 경우. 지대주 나사 수평간극은 두 가지 기성 지대주보다 컸으며, 지대주 나사 수직간극을 측정할 수 없었다. 기성 지르코니아 지대주는 나사받침이 명확하게 형성되어 있었으나, 나사받침의 형태가 지대주 나사와 조화되지 않았다. 맞춤형 지르코니아 지대주의 경우에는 나사받침이 명확하게 형성되어 있지 않았다. 결론: 내부육각 연결형 임플란트에서 기성 티타늄 지대주가 두 종류의 지르코니아 지대주보다 적합도가 좋았다. 맞춤형 지르코니아 지대주는 두가지 기성 지대주에 비해 변연간극이 크고 나사와 나사받침 사이의 적합도가 낮았다.
본 논문에서는 복합재 대차프레임 볼트 체결부의 내구성 향상 방안에 대한 연구를 다루고 있다. 이를 위해, 인서트와 나사산 유무에 따른 3가지 경우를 고려하여 볼트 체결부에 대한 시험 및 해석을 통해 인서트 형태 및 유무에 미치는 영향을 평가하였다. 제안된 볼트 체결부의 구조 성능은 ASTM D5961에 의거한 시험을 통해 비교 평가하였다. 시험결과, 나사산이 없는 인서트를 갖는 볼트 체결부가 가장 적합한 것으로 확인되었다. 또한, 볼트 체결부를 고려한 복합재 대차프레임에 대한 구조 안전성 평가를 JIS E 4207에 의거하여 유한요소해석을 통해 평가하였다. 복합재 구조물은 Tsai-Wu 파손기준식에 의해 파손평가를 적용하였고, 볼트 체결부와 같은 금속재 구조물은 Von-Mises 파손기준식에 의해 평가하였다. 이때, 볼트 체결부의 경우에는 상세한 구조해석 결과 검토를 위해 서브모델링 기법을 적용하였다. 구조해석결과, 나사산이 없는 인서트가 적용된 볼트 체결부의 경우에는 볼트 체결부 주위의 복합재 구조물에 발생하는 Tsai-Wu 파손지수가 다른 경우에 비해 약 50% 감소하는 경향을 보였는데, 이는 나사선이 없는 인서트 형상이 복합재 대차프레임 볼트 체결부의 내구성을 향상시킬 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.