• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.101-108
• /
• 2021

This paper builds a real-time home security system based on the OneNet cloud platform to control the status of the house through a smartphone. The system consists of a local part and a cloud part. The local part has I/O devices, router and Raspberry Pi (RPi) that collects and monitors sensor data and sends the data to the cloud, and the Flask web server is implemented on a Rasberry Pi. When a user is at home, the user can access the Flask web server to obtain the data directly. The cloud part is OneNet in China Mobile, which provides remote access service. The hybrid App is designed to provide the interaction between users and the home security system in the smartphone, and the EDP and RTSP protocol is implemented to transmit data and video stream. Experimental results show that users can receive sensor data and warning text message through the smartphone and monitor, and control home status through OneNet cloud.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.79-88
• /
• 2005

The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.

• 한국해양학회지
• /
• v.7 no.2
• /
• pp.59-73
• /
• 1972

The heavy minerals of a barred estuarine and lagoonal sediments along the North Carolina coast have been studied with more than one hundred samples. Currents, salinity, and pH exhibit well-developed gradients from the upstream parts of the estuaries on the west toward the open ocean on the east. Twenty- four heavy minerals were identified in sediments of the study area. However, less than half of these occur frequently and the remainder exist only in minor quantities or trace amounts. Heavy minerals usually comprise less than 1% of the sample but vary from sample to sample. The maximum amount of heavy minerals in sediments of sounds and estuaries is 2.4% and in sediments of Outer Banks is 16.7%. Opaque minerals range from 10 to 85% of the total heavy mineral assemblage. Garnet and sillimanite are relatively more abundant in the eastern part than the western part in the area. Garnet more abundant in the northern part than the southern part, whereas sillimanite is more abundant in the southern part than the northern part, because the garnet source is in the northern part and one of the sillimanite source is in the southern part in the study area. The results of heavy mineral study indicate that the source of sediments is the Blue Ridge and Piedmont crystalline complex, and Coastal Plain formations. Some portions of sediments are transported from the Atlantic Ocean by the landward currents. They further indicate that the sediments of the Atlantic coast in the study area are transported mainly from the northern part to southern part by longshore littoral currents, and some portions of sediments are transported from the southern part to the northern part by the Gulf Stream.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.428-434
• /
• 2001

This study surveys the fiber behavior in yam formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yams were compared with the properties of ring shun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed wish respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fibers migration is. The Solo-spun film structure has two groups. One is shorter than the others one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derided from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun troller.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.70-70
• /
• 2001

This study surveys the fiber behavior in yarn formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yarns were compared with the properties of ring spun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed with respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fiber migration is. The Solo-spun yarn structure has two groups. One is shorter than the other one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derived from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun roller.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.741-744
• /
• 2000

In general there occur warpage in one way long part. Warpage is caused by differential shrinkage-Orientation Effect, Volumetric Shrinkage Effect, Differential Cooling Effect -over the part. Deco-Top is located at the top of 29"TV set and it's shape is one way long$(626{\times}130mm)$. Material is used transparency ABS resin. So we can't design ribs in this part. And we use film gate to avoid weld line. In these reasons we must develop no ribs and no warpage product. In this study we use MOLDFLOW's software-MF/FLOW, MF/COOL, MF/WARP. Using MF/FLOW, set the flow balance and gate positioning. And we can set cooling channel layout and the optimum processing condition through MF/COOL and MF/WARP. In result we reduced trials and obtained good product.

• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.21-27
• /
• 1986

This paper deals with a continuous review (s,S) spare part inventory system. The distributions of service life of each part and the replenishment lead time are assumed to be exponential. Assuming that there is never more than a single order outstanding, we obtain the average annual cost of operating the inventory system. If the length of stockout period is small enough to be neglected compared to the length of operating period, the optimal operating policy variables minimizing the cost rate can be calculated iteratively. For the case of one-for-one ordering (that is, s=S-1), an exact cost rate, and a closed form decision rule minimizing the cost rate are obtained for a more general situation in which more than one order is allowed to be outstanding and the distribution of the replenishment lead time is general.

• Structural Engineering and Mechanics
• /
• v.19 no.5
• /
• pp.551-566
• /
• 2005

Using two different, but related approaches, an exact dynamic stiffness matrix for a two-part beam-mass system is developed from the free vibration theory of a Bernoulli-Euler beam. The first approach is based on matrix transformation while the second one is a direct approach in which the kinematical conditions at the interfaces of the two-part beam-mass system are satisfied. Both procedures allow an exact free vibration analysis of structures such as a plane or a space frame, consisting of one or more two-part beam-mass systems. The two-part beam-mass system described in this paper is essentially a structural member consisting of two different beam segments between which there is a rigid mass element that may have rotatory inertia. Numerical checks to show that the two methods generate identical dynamic stiffness matrices were performed for a wide range of frequency values. Once the dynamic stiffness matrix is obtained using any of the two methods, the Wittrick-Williams algorithm is applied to compute the natural frequencies of some frameworks consisting of two-part beam-mass systems. Numerical results are discussed and the paper concludes with some remarks.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.446-450
• /
• 2002

Pneumatic system has been mainly used as main equipment for actuation and control of compressed air force in manufacturing industry, pneumatic circuit for the most part is used in Meter-Out circuit. Meter-Out circuit method is Flow Control Valve to fit in exhaust part of cylinder port. In the reverse, Meter-In circuit is Flow Control Valve to fit in input part of cylinder port. This study examines the dynamic characteristics comparison of Meter-In and Meter-Out Circuits in the pneumatic circuits. The results of the experimental research are obtained to the followings: i ) System Response is Meter-In Circuit more than Meter-Out one before cushion zone. ii) we conjectured that the collision of piston and head cover is ease to collide Meter-In Circuit more than Meter-Out one at the stroke end part.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.97-101
• /
• 1993

In this work, the imaginary part of the inner modulation transfer function of the cutting dynamics is introduced for tool wear monitoring. Time-series method is utilized to construct the generalthree dimensional cutting dynamics whose imaginary part of the inner modulation transfer funcition shows the proportionality to tool wear at the natural frequency of the machine tool dynamics. This modelis reduced to single-input single- output model without altering the proporitonality characteristics to tool wear and implemented to the dual computer system in which one computer performs measurement while the other calculates the imaginary part of the inner modulation transfer function of th cutting dynamics by the batchleast square method. The values of the imaginary part at the natural frequencyof the machine tool structure in the cutting direction are compared to the one calculated during machining with a brand new tool to decide the current stants of the tool. The experiments shows the relevance of the proposed concept.