• 한국음향학회지
• /
• 제34권6호
• /
• pp.470-478
• /
• 2015

음선 모델링에서 다층 해저 바닥을 고려하는 경험적 방법 중 하나는 단일층 가정으로써, 다층 구조에 대한 평면파 반사계수를 사용하는 것이다. 본 연구자는 이층 해저 바닥에 대해 단일 층 가정의 유효성을 조사하고, 음속비, 송수신 거리 당 층 두께, 1차 반사파의 스침각의 함수로 표현되는 간단한 부등식 조건을 얻었다. 부등식 조건으로부터, 단일 층 가정이 실제 해양 환경의 중주파수 음선 모델링에 적용될 수 있음을 보였다. 마지막으로 한국 동해와 유사한 해양환경에 대해 수치실험을 수행하였다. 다층 해저 바닥에 대한 평면파 반사계수를 적용한 기하학적 빔 모델을 이용하여 비상관 전달손실을 계산하고, 서울대학교에서 개발한 포물선 방정식 패키지인 SNUPE 2.0의 결과와 비교하였다.

• World Technopolis Review
• /
• 제4권2호
• /
• pp.46-61
• /
• 2015

There is an implicit assumption in most regional innovation policy studies that once a policy has been made the policy will be implemented. This assumption is not valid for regional innovation policies formulated in many countries. This assumption rests upon certain political and organization conditions. It is frequently said that regional innovation system in Korea is one of the successful cases because of properly established institution for the implementation of innovation policies. The components of institution for innovation are defined in this article. For the analysis of institution for regional innovation system in Korea, three aspects such as organization, policies & programs, and governance structure were taken into account. Institution for regional innovation system in Korea is analyzed with three aspects: (1) organization for policy implementation, (2) innovation policy, and (3) governance structure. Firstly, organizations for innovation in Korea are composed of three categories such as organizations for policy formulation, organizations for policy implementation and agencies for coordination. Secondly, there are two categories of policies for innovation: (1) policies for the enhancement of national competitiveness and policies for the regional innovation capacity building, and (2) policies for fostering manpower and policy for regulatory reform. Thirdly, innovation governance in Korea is composed of three layer structure: (1) top level governance which is composed of two committee, three ministries and two agencies, (2) local level governance such as one innovation related offices and one center for regulatory reform, and (3) one category of agency for coordination as a regional platform.

• Current Research on Agriculture and Life Sciences
• /
• 제2권
• /
• pp.98-108
• /
• 1984

Generally, in case of constructing the embankments on the soft clay layers, one-dimensional consolidation settlement under the assumption of a middle position stress in a single layer makes a great difference with the integral value, ie. the final settlement. Consequently, to find how many equal segments of the soft clay layer are needed to converge into the integral value and which position should be taken as a position of mean stress, authors compared the theoretical value of the settlement due to one-dimensional consolidation with the practical value of the settlement due to two dimensional consolidation. The obtained results are as follows. 1) The practical value of the two-dimensional consolidation settlement can be estimated by the 74-83% theoretical value of the one-dimensional consolidation settlement. 2) When the soft clay layer was cut into 8-16 equal segments according to the depth, one-dimensional consolidation settlement converge into the integral value. 3) Assuming a total soft clay layer as a single one, the depth of a mean stress position is 0.29-0.37 of the thickness of the total soft clay layer. 4) The Hyperbola Method which presumes the long-term settlement from the short-term practical value of settlement is credible, because all practical value of the settlement are in safe side of the standard error of estimation and the correlation coefficient is up to 0.95.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.29-42
• /
• 2022

In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.53-62
• /
• 2004

A single layer latticed dome is one of the most efficient structures because of its low specivic gravity. For easily analyzing of a single layer latticed dome, joint system is assumed to be pin or rigid joint. However, its joint uses ball whose system has intermediate properties of pin and rigid joint. Therefore this study has a grasp of bending rigidity, stress and mechanical properties through experimental and analyzing method of the bolt inserted ball joint. To analyze the stress of bolt and sleeve, this study uses through 3D elastic contact and cubic element, and then the ball and the bolt are perfectly connected for easily analyzing Compared experimental results to F.E.M, each specimen has an error of less than 12 percent. In the results of stress distribution through F.E.M, stress occurs from bottom of bolt to top of sleeve, and most of tension appears on the bolt, also compression occurs from upper parts of the bolt to the sleeve. The assumption of bending stiffness in ball joint is well known that bolt resists only tension and upper sleeve resiss compression. The results of experiment and analysis have $7{\sim}56%$ error, assuring that upper part of bolt occurs of partial compression. In the result of modified assumption have $4{\sim}20%$ error.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1996년도 정기학술강연회 발표논문 초록집
• /
• pp.7-9
• /
• 1996

A simple two-and -half-layer model is used to study the circulation of South China Sea( SCS ). The model is coming from the reduced gravity model of Hurbult and Thompson, with the assumption of rigid surface. It shows there is no distinct branch of the Kuroshio into the SCS. Both the upper and lower pycnocline height anomaly show that the main feature of the circulation of SCS is a cyclone, which is generated by the transportion of the vorticity from the Kuroshio. Aftr generated, the cyclone moves westward due to the beta effect, then dissipates near the west boundary due to the viscosity. After an old one dissipates, a new one appears again. The life cycle of the cyclone is about 160 days.

• ETRI Journal
• /
• 제28권6호
• /
• pp.709-720
• /
• 2006

In this paper, we suggest a simple and efficient multiple-forwarder-based file distribution method which can work with a tree-based application layer multicast. Existing multiple-forwarder approaches require high control overhead. The proposed method exploits the assumption that receivers join a session at different times. In tree-based application layer multicast, a set of data packets is delivered from its parent after a receiver has joined but before the next receiver joins without overlapping that of other receivers. The proposed method selects forwarders from among the preceding receivers and the forwarder forwards data packets from the non-overlapping data packet set. Three variations of forwarder selection algorithms are proposed. The impact of the proposed algorithms is evaluated using numerical analysis. A performance evaluation using PlanetLab, a global area overlay testbed, shows that the proposed method enhances throughput while maintaining the data packet duplication ratio and control overhead significantly lower than the existing method, Bullet.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.125-125
• /
• 2020

European Space Agency's Sentinel-1 has an improved spatial and temporal resolution, as compared to previous satellite data such as Envisat Advanced SAR (ASAR) or Advanced Scatterometer (ASCAT). Thus, the assumption used for low-resolution retrieval algorithms used by ENVISAT ASAR or ASCAT is not applicable to Sentinel-1, because a higher degree of land surface heterogeneity should be considered for retrieval. The assumption of homogeneity over land surface is not valid any more. In this study, considering that soil roughness is one of the key parameters sensitive to soil moisture retrievals, various approaches are discussed. First, soil roughness is spatially inverted from Sentinel-1 backscattering over Yanco sites in Australia. Based upon this, Artificial Neural Networks data (feedforward multiplayer perception, MLP, Levenberg-Marquadt algorithm) are compared with Fractal approach (brownian fractal, Hurst exponent of 0.5). When using ANNs, training data are achieved from theoretical forward scattering models, Integral Equation Model (IEM). and Sentinel-1 measurements. The network is trained by 20 neurons and one hidden layer, and one input layer. On the other hand, fractal surface roughness is generated by fitting 1D power spectrum model with roughness spectra. Fractal roughness profile is produced by a stochastic process describing probability between two points, and Hurst exponent, as well as rms heights (a standard deviation of surface height). Main interest of this study is to estimate a spatial variability of roughness without the need of local measurements. This non-local approach is significant, because we operationally have to be independent from local stations, due to its few spatial coverage at the global level. More fundamentally, SAR roughness is much different from local measurements, Remote sensing data are influenced by incidence angle, large scale topography, or a mixing regime of sensors, although probe deployed in the field indicate point data. Finally, demerit and merit of these approaches will be discussed.

• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.390-396
• /
• 1982

The onset of longitudinal vortices in horizontal Blasius flow isothermally heated from below is studied analytically. The assumption that at the onset of thermal instability the thermal disturbances are confined within the thermal boundary layer is employed for the limiting case of large Prandtl number. Polynomial representations for the basic quantities obtained by the integral method of the boundary layer analysis have been used. Then the system of differential equations and boundary conditions for disturbance quantities is reformulated in a convenient form so that the solutions may be constructed as rapidly convergent power series. The critical buoyancy parameter G $r_{x}$ $^{*}$ /R $e^{*1.5}$ falls between 2 and 6, which is about one order of magnitude lower than the existing experimental values. It is also shown that the positions of the onset of instability can be closely predicted by the present theory.y.y.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.605-610
• /
• 2002

Eigenvalues are taken as performance criteria for structural damping design using viscoelastic material. Given material properties, optimal distribution of damping material is sought based on eigenvalue sensitivity. For eigenanalysis of frequency dependent viscoelastic material treated structures, Golla-Mushes-McTavish (GHM) model is used and some dominant modes are chosen for consideration. To avoid the intensity of computation caused by increased problem size, an alternative approximate method is proposed which uses elastic modes and can be applied under small damping assumption. A cantilever beam treated with unconstrained viscoelastic layer is tested and optimal distribution of thickness of the layer is illustrated. Partial coverage configurations are compared with the one-sided full coverage case.