• Journal of Korea Water Resources Association
• /
• v.31 no.5
• /
• pp.587-597
• /
• 1998

Researchers have suggested that the fractal dimension of the stream length is uniform in all the streams of the basin and the estimates of the fractal dimension are in between 1.09 and 1.13 which may be considerably large values. In this study, the fractal dimension for the Ieemokjung subbasin streams in the Pyungchang River basin which is one of the IHP representative basins in Korea are estimated for each stream order using three scale maps of a 1/50,000, 1/25,000, and 1/5,000. As a result, the fractal dimension of the stream length is different by stream order and the fractal dimension of all streams shows a lower value in comparison to that of the previous studies. As a result of the fractal dimension estimation for the Ieemokjung subbasin streams, we found that the fractal dimension of the stream length shows different estimates in stream orders. The fractal dimension of 1st and 2nd order stream is 1.033, and the fractal dimension of 3rd and 4th order stream is 1.014. This result is different from the previous studies that the fractal dimension of the stream length is uniform in all streams of the basin. The fractal dimension for a whole stream length is about 1.027. Therefore, the previous estimates of 1.09 and 1.13 suggested as the fractal dimension of the stream length may be overestimated in comparison with estimated value in this study.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.59-72
• /
• 2004

The objectives of this study were to investigate the perceptions of Korean female university students for clothing pattern tendency and structural element of clothing pattern image dimension and to find how individual personality type influence the preferred clothing pattern characteristics. For this study, a questionnaire was designed and sent to 600 female university students of Daejeon, Seoul and metropolitan area. The tool used in this study was MBTI(The Myers-Briggs Type Indicator) Form G Korean version and for the analysis of data SPSS 10.0 package were used. 10 representative patterns for this study were floral, dot, stripe, check, animal, abstract & artistic, geometric, vegetable & leaf, paisely, patchwork pattern. The data were analyzed by factor analysis, arithmetic mean, One-Way ANOVA, x²-test. The major findings were as follows: Clothing pattern image dimension perceived by Korean female university students for 10 representative patterns were basic form, deluxe, specialty, and cultural dimension. Among them, basic form and deluxe dimension were major dimensions. In basic form dimension, dot pattern score was high indicating female students perceive it as light, comfortable, clean, cool and simple pattern image. In deluxe dimension, floral pattern scored high and in specialty dimension, abstract and artistic pattern scored high among other pattern image. In cultural dimension, geometric pattern and check pattern scored high. Based on other detailed analysis results, It is concluded that the personality type greatly influence clothing pattern evaluation. For example, in case of color combination of patchwork pattern, there was a difference in color preference depend on a personality type such as sensing(S) or intuition(N). Therefore, sensing personality type preferred adjacent color combination than contrast color combination. Detailed marketing strategy is necessary in planning textile design of merchandise plan.

• Imaging Science in Dentistry
• /
• v.35 no.1
• /
• pp.33-40
• /
• 2005

Purpose : (1) To analyse the effect of exposure time, ROI size and one impact factor in the image processing procedure on estimates of fractal dimension; and (2) to analyse the correlated relationship between the fractal dimension and the Cu-Eq value (bone density). Materials and Methods : The cylindric bone phantoms of 6 large and 5 small diameter having different bone densities respectively and human dry mandible segment with copper step wedge were radiographed at 1.0 and 1.2 sec esposure (70 kVp, 7 mA) using one occlusal film and digitized. Eleven rectangular ROIs from 11 cylindric bone phantoms and 4 rectan-gular ROIs from cortical, middle, periodontal regions, and socket of bone were selected. Gaussian blurred Image was subtracted from original image of each ROI and multiplied respectively by 1, 0.8, and 0.5, and then the image was made binary, eroded and dilated once, and skeletonized. The fractal dimension was calculated by means of a box counting method in the software ImageJ. Results : The fractal dimension was decreased gradually with continued bone density decrease showing strong correlations (bone phantom; r> 0.87, bone; r> 0.68) under 70 kVp 1.0 sec M = 0.8. Fractal dimensions showed the significant differerence (p < 0.05) between two different exposure times on the same small ROI of bone phantom. Fractal dimensions between two different sizes of ROI on bone phantom showed the significant differerence (p < 0.05) under 1.2 sec exposure, but did not show it (p > 0.05) under 1.0 sec exposure. Conclusions : Exposure time, ROI size, and modifying factor during subtracting could become impacting on the results of fractal dimension. Fractal analysis with thoroughly evaluated method considering the various impacting factors on the results could be useful in assessing the bone density in dental radiography.

• Phonetics and Speech Sciences
• /
• v.6 no.4
• /
• pp.53-65
• /
• 2014

The current research examines whether pitch contour shapes in North Kyungsang pitch accent contrasts provide a phonetic dimension for phonological discreteness in a mimicry task. Two pitch accent continua resynthesized were created for HH vs. HL and HH vs. LH. To confirm a phonetic dimension for accounting for pitch accent categories in North Kyungsang Korean, the mimicries of speakers of two dialects (i.e., North Kyungsang & South Cholla) were compared. One of the findings showed that, for North Kyungsang speakers, the range of mean f0 peak times was a phonetic dimension undergoing a continuous shift within a stimulus continuum for both HH vs. HL and HH vs. LH. On the other hand, for South Cholla speakers, there were no apparent shifts around categorical boundaries for either HH vs. HL or HH vs. LH. Regarding individual mimicries on f0 peak timing, there are many variations. For HH vs. LH, three North Kyungsang speakers showed a discrete pattern reflecting a shift in phonological categories, but for HH vs. HL, there was no such distinction showing a categorical shift, though there were statistically significant differences for two speakers. Interestingly, one of the North Kyungsang speakers showed a continuous phonetic dimension for both HH vs. HL and HH vs. LH. Lastly, the f0 valley timing did not exhibit a discrete or gradient phonetic dimension for speakers of either dialect. On the basis of these results, what is interesting is that the tonal target such as high tone in North Kyungsang pitch accent categories within the autosegmental-metrical (AM) theory may be realized within individual cognitive systems for representing the interaction of perception and production.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.234-240
• /
• 2006

We study the dynamic burst assembly based on traffic prediction and offset and delay differentiation in optical burst switching network. To improve existing burst assembly mechanism and build an adaptive flexible optical burst switching network, an approach called quality of service (QoS) based adaptive dynamic assembly (QADA) is proposed in this paper. QADA method takes into account current arrival traffic in prediction time adequately and performs adaptive dynamic assembly in limited burst assembly time (BAT) range. By the simulation of burst length error, the QADA method is proved better than the existing method and can achieve the small enough predictive error for real scenarios. Then the different dynamic ranges of BAT for four traffic classes are introduced to make delay differentiation. According to the limitation of BAT range, the burst assembly is classified into one-dimension limit and two-dimension limit. We draw a comparison between one-dimension and two-dimension limit with different prediction time under QoS based offset time and find that the one-dimensional approach offers better network performance, while the two-dimensional approach provides strict inter-class differentiation. Furthermore, the final simulation results in our network condition show that QADA can execute adaptive flexible burst assembly with dynamic BAT and achieve a latency reduction, delay fairness, and offset time QoS guarantee for different traffic classes.

• Journal of Oral Medicine and Pain
• /
• v.8 no.1
• /
• pp.121-126
• /
• 1983

This study is conducted with a view to make correct sexual differentiation by the utilization of discriminant functions. For that purpose were randomly sampled out 148 young adults testes, comprising 67 males and 81 females, ranging from 15 through 18 years fo age. Based on the values made available from the measurement of 6 items corresponding to the maxillary cast models, a statistical analysis was made to abstract feasible discriminant functions. The results findings are as follows: 1. The mean value by sex indicates, in all items, higher one in male group than in female group. 2. Through the measurement were defined as singnificant items in sexual differentiation the bucco-lingual dimensions of canine, 1st-molar, 2nd molar, and 1st bimolat width. 3. Derived from the value from measurement items were discriminant functions with the intention of applying them to sexual differentiation, as follows: 1) Y=-25.4112+0.7513BL3+0.3298BL4-0.2854BL5+0.7350BL6-0.3482BL7+0.2893AW (as tested by Method I) 2)Y=-25.0628+0.7737BL3+0.7468BL6-0.3885BL5+0.2951AW(as tested by Method II) BL3 : Bucco-lingual dimension of upper canine BL4 : Bucco-lingual dimension of upper first prmolar BL5 : Bucco-lingual dimension of upper second premolar BL5 : Bucco-lingual dimension of upper first molar BL6 : Bucco-lingual dimension of upper second molar AW : Upper first bimolar width 4. Sexual defferentiation in terms of descriminant functions represented a probility of 74.6%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.26-30
• /
• 2003

Since the dimension of cold forged part is larger than the cavity size of forging die, the difference results from the various features, such as, the elastic characteristics of die and workpiece, thermal influences, and machine-elasticity. All of these factors should be considered to get more accurate prediction of the dimension of forged part. In this paper, severe FE techniques are proposed to improve the prediction accuracy of dimension for cold forged part. To validate the importance of the above mentioned factors, and the estimated results are compared with the experimental results. The used model is a closed die upsetting of cylindrical billet. The calculated dimensions are well coincided with .the measured values based on the proposed techniques. The proposed techniques have put two simple but important points into Fe simulation. One is the separation of forging stages into 3 steps, from a loading through punch retraction to ejecting stage. The other is the dimensional change, according to the temperature changes due to the deformation. The FE analysis could predict the dimension of cold forged part within the $10{\mu}m$, based on the more realistic consideration.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.4
• /
• pp.961-976
• /
• 2019

Let R be any commutative ring and S be any multiplicative closed set. We introduce an S-version of $\mathcal{F}$-Mittag-Leffler modules, called $\mathcal{F}_{\mathcal{S}}$-Mittag-Leffler modules, and define the projective dimension with respect to these modules. We give some characterizations of $\mathcal{F}_{\mathcal{S}}$-Mittag-Leffler modules, investigate the relationships between $\mathcal{F}$-Mittag-Leffler modules and $\mathcal{F}_{\mathcal{S}}$-Mittag-Leffler modules, and use these relations to describe noetherian rings and coherent rings, such as R is noetherian if and only if $R_S$ is noetherian and every $\mathcal{F}_{\mathcal{S}}$-Mittag-Leffler module is $\mathcal{F}$-Mittag-Leffler. Besides, we also investigate the $\mathcal{M}^{\mathcal{F}_{\mathcal{S}}$-global dimension of R, and prove that $R_S$ is noetherian if and only if its $\mathcal{M}^{\mathcal{F}_{\mathcal{S}}$-global dimension is zero; $R_S$ is coherent if and only if its $\mathcal{M}^{\mathcal{F}_{\mathcal{S}}$-global dimension is at most one.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.198-207
• /
• 2020

Smart City operates with the purpose of solving urban problems. The important thing in smart city operation is that spatial information must be managed at a high level. In addition, it has the characteristics of being managed by one platform. This study presented the core value dimension of smart city based on analysis of various domestic and overseas smart city operation cases. Smart cities are basically operated based on spatial information, and the higher the level of spatial information, the more smart city services can be connected and managed in an integrated manner. The performance dimension of smart city core values presented in the study includes prosperity, personalization, convenience, accuracy, sustainability, safety, environment, integration, etc., and there is a connectivity dimension, a concept that can be managed in an integrated manner. This study will be useful for empirical research on smart city performance dimension design and surveys based on case studies. It will also help field managers who develop, operate, and manage smart cities when quantifying performance dimensions.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.95-98
• /
• 2000

Film bulk acoustic resonator used in microwave region can be analyzed by one-dimension Mason's model and one-dimensional numerical method, but it had several constraints to analyze effects of area variation, electrode-area variation, electrode-shape variation and spurious characteristics. To overcome these constraints film bulk acoustic resonator must be analysed by three dimensional numerical method. So, in this paper three dimensional finite element method was used to analyze several moles of resonance and was compared with the one dimension Mason's model analysis and analytic solution.