• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.826-833
• /
• 2002

In recent years, due to the continuous concentration of population and sharp increment of commuters around Seoul metropolitan area, traffic jam has become one of severe problems along with housing in this area. In oder to solve the problem like the one mentioned above, several countries such as Japan, France and so on gradually operate double deck trains as efficient, reliable and comfortable mass transportation systems. However, the double deck train has weak points such as big cross sectional area and high mass center that cause unsafe vehicle running performances and interface problems between the vehicles and infrastructures. Therefore, prior to operate double deck trains on the existing lines, careful investigations should be performed. For these reasons, we have investigated foreign double deck trains and studied the technologies for a double deck train as an alternative way to carry heavy transportation efficiently and comfortably.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.22-28
• /
• 2007

During the passage of the train, the railway bridge undergoes vibration and noise. The noise of railway bridge can be occurred from various sources. The wheel-rail contact, noise from machinery parts, structural-borne noise, pantagraph noise and aerodynamic noise of the train work in combination. Running train is one of the most important factors for railway bridge vibration. The repeated forces with equidistant axles cause the magnification of dynamic responses which relates with maintenance of the track structure and structure-borne noises. The noise problem is one of the most important issues in services of light rail transit system which usually passes through towns. In the present study, The vibration and noise of the LRT bridge will be investigated with utilizing dynamics responses from moving train as input data for noise analysis.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.93-97
• /
• 2009

The experiments for aerodynamic characteristics of railway acoustic screen are performed using 1/61 scaled-down moving model rig facility which employs an axis symmetry and one wire guidance method. The launching mechanism is an air-gun type. The train model for the experiment is the high speed train (Korea Train Express: KTX) and the tested speed is about 300 km/h. The tested train length is 61 em which is corresponding to two units of KTX train. The cross sectional area and weight of train model are 0.00264 $m^2$ and 287 g, respectively. The Reynolds number based on the model train length is $1.2{\times}10^7$. The strength of pressure wave is measured using piezo typed pressure sensor. The measured pick value of pressure was as high as 365 Pa in the shortest gap between the acoustic screen and model train. The measured pressure is well compared with the field test data of mc 779-1 [2] values. However, the experimental data were slightly lower than the mc 779-1 values. The results show the model test can be used as a substitute for the field test.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.137-141
• /
• 2004

A series of filed tests have been performed to investigate the aerodynamic effects on platform of the railway station during the passage of train that can be unpleasant and even dangerous to the pedestrians. To assess the aerodynamic effects on the platform, two aerodynamic properties has been measured; one is the wind gust induced by the train and the other is the pressure pulses generated when the nose and the tail of train passes. To measure these aerodynamic properties during the train passage, an array of hot-wire type anemometers and several sets of pressure transducers have been used, respectively. This paper deals with the filed test on conventional railway at about 100km/h operational speed, in which total 34 measurements has been made at the Bugok station in Seoul-Busan line for Saemaul-ho and Mugungwha-ho train. The results showed dramatic differences in the aerodynamic features between the two trains that are supposed to originate from the contrasting nose shapes of the trains.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.184-192
• /
• 2001

Cam/tappet wear is one of the critical concerns in valve train deign. Maximum contact stress and minimum oil film thickness between the cam and tappet are usually checked for the estimation of wear characteristics. If the two extreme cases arise simultaneously, there is a strong possibility of cam/tappet wear. In this paper, effects of valve train layout on the wear characteristics were studied. Especially for swinging arm type valve trains, initial geometric layout must be very carefully defined to avoid wear problems. The study was performed fur an end pivot type OHC valve train, which had severe wear problems. Analysis results show that some geometric parameter affect very sensitively on the wear characteristics. Experiments were also performed for the original and modified valve trains, which strongly support the analysis results.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.513-518
• /
• 2003

Noises are defined as unwanted sound and invoke the physical harm and unconvenience. The higher the noise level is, the more damage peoples have. Low frequency noise is less harmful than high frequency one. In case of train, noises inside of train which is isolated from outer circumstances reduce the convenience of passenger very much. This paper reviewed the noise standard of train for urban subway and investigated the main transformer as the main noise source of train and suggested the method to diminish the noise resulted from main transformer of train and compared the measured results of before and after the improvement of main transformer.

• IE interfaces
• /
• v.14 no.2
• /
• pp.210-217
• /
• 2001

Because passenger seat is one of the most important parts in the determination of passengers' satisfaction for train, it is absolutely important to design the passenger seat so that train passengers can satisfy. So, in the seat design it is necessary to consider passengers' characteristics, requirements, and dissatisfactions. However, passengers' dissatisfactions for the seat of Mugunghwa-ho train have been often raised through various routes. It is necessary to resolve their dissatisfactions to provide comfortable trip to passengers. So, we designed a new seat of Mugunghwa-ho train that resolved passengers' dissatisfactions. Our focusing design parts were the seat pan and the backrest of passenger seat. We investigated passengers' dissatisfactions for the seat of Mugunghwa-ho train through various methods and the human factors design guidelines through literature survey. We designed a new seat on the basis of investigated results. For newly designed seat, we evaluated comfort and sensible satisfaction in comparison with the existing seat. An experimental method and subjective methods were used in this evaluation. In all aspects, the new seat was superior to the existing.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.877-882
• /
• 2005

The definition of multi-coupled operation is that coupled two trainsets is able to be operated one trainset identically. That is to say, the one driver, coupled two trainsets can operate the traction and braking system, control vehicle doors, phanto-graph, HVAC and passenger room lighting system etc, such as one trainset controlling. This study will provide high speed train design engineer with introducing multi-coupled operation system electrically and presentation automatic complex coupler mechanism, and then this paper will be applied to design next generation high speed train system such as Jun-la/Ho-nam line

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.747-750
• /
• 2006

A turnout which permits trains to pass from one track to another has a disconnecting rail component, namely a crossing, so that noise and vibration arc occurred abruptly when train is passing through it. In Korea, it is planned to adopt the high speed tilting train, which operates at the speed of 180 km/h, at the conventional line. However, for application of the tilting train, it is prerequisite to establish the stable turnout system allowing the tilting train to pass through it without reducing speed. This study was performed to evaluate noise and vibration emitted from the prototype turnout which is developed for speed-up of the conventional line. For the purpose, noise and vibration were measured at near the conventional turnout and the improved one, which is constructed at Waegwan station and Kumi station of Gyeongbu line, respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.199-206
• /
• 2015

A rising attention is paid to the railway system in many countries. KOREA is also of the opinion that the railway has to play a more important role in the near future to face up to the problems that increase gradually in the transport sector. To attract more traffic to the rail networks, it is important for rail modes to have running time competitiveness. Tilting trains, where it is possible to tilt the car-body towards the center of the curve, are a less expensive alternative to shorten travelling times on existing lines. Running time for tilting train is one of the most important factors, with which passenger demand forecasting or economic feasibility analysis will be done. This paper evaluates the speed limitation of tilting train around curves and also presents calculation process of its simulated possible running time. Then the adequacy of estimated time is verified with running time for Korean protype tilting train TTX (Tilting Train eXpress) by actual test run. As a case study, the estimated running time for the production version of tilting train and its time saving are presented compared with 2012's conventional Saemaul trains and non-tilting trains on the Gyeongbu line in the Korean rail network.