• 한국수자원학회논문집
• /
• 제44권4호
• /
• pp.275-283
• /
• 2011

미래 기온변화 정보를 제공하는 General Circulation Model (GCM) 자료, 즉 광역 기온자료를 이용하여 우리나라의 국지 수온변화를 추정하는 연구를 수행하였다. 국지수온 추정은 마산만, 시화호, 낙동강 하구를 대상으로 Two-step 접근방법과 One-step 접근방법을 적용하여 각각의 추정오차를 비교 분석하였다. Two-step 추정방법은 광역 기온으로 국지기온을 추정하는 제1단계에서는 선형회귀분석 기법을 적용하였으며, 모든 지점에서 결정계수가 0.98~0.99 정도로 매우 높게 나타났다. 그리고 국지기온으로 국지수온을 추정하는 제2단계에서는 S-형태함수의 비선형 회귀분석기법을 적용하였으며 이 경우 RMS(Root-mean squared) 오차는 마산만에서 2.07 (온도 증가시기), 1.93 (온도 감소시기), 시화호에서는 2.59, 낙동강 하구에서는 1.58로 파악되었다. 반면 동일한 S-형태함수를 이용한 비선형 회귀분석기법으로 광역기온자료로부터 바로 국지 수온을 추정하는 One-step 접근방법을 적용한 경우, RMS 오차는 마산만이 2.28 (온도증가시기), 1.89 (온도감소시기), 시화호에서는 2.55, 낙동강하구는 1.52로 Two-step 접근방법과 비슷한 수준의 오차를 보이는 것으로 파악되었다. 따라서 광역 기온자료를 이용하여 국지 수온을 추정하는 경우에는 One-step 접근방법도 유용하고 실용적인 것으로 판단된다.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.459-465
• /
• 1994

a-측으로 배향된 $YBa_2Cu_3O_{7-\delta}$ 고온 초전도 박막을 $LaAIO_{3}$(100)단결정 기판에 이중 타게트 off-axis rf마그네트론 스퍼터링법으로 증착하였다. 박막은 기판온도(Ts)$590^{\circ}C$와 $680^{\circ}C$사이에서 단일공정으로 증착하는 one-step방법과, $590^{\circ}C$의 저온에서 a-축으로 배향된 YBCO박막(두께-30nm)을 면저 만들어 틀로 작용시킨 후 그 틀위에 나머지 부분을 기판온도를 승온하면서 증착하는 방법인 two-step방법 등 두 가지 방법을 사용하여 증착시켰다. one-step방법에서는 $T_s$가 증가함에 따라 감소하였으며, ($00 \ell$)피크는 증가하였다. Two-step방법으로 증착한 박막은 증착속도가 감소함에 따라 (h00)피크가 우세하게 나타났다. 박막의 미세구조는 a-축, c- 축 배향성이 혼재하여 핀홀과 같은 결함들이 생성되었다. 모든 경우 $T_s$가 감소함에 따라 a-축 배향성은 우세하였으나 전기적 특성은 저하되었고, 긴 전이온도 폭을 가졌다.

• BMB Reports
• /
• 제34권1호
• /
• pp.47-50
• /
• 2001

A one-step, two-site enzyme immunoassay was developed for measuring human alpha-fetoprotein (AFP) in serum and amniotic fluid using monoclonal antibodies (McAb) by eliminating the high-dose hook effect. Three McAbs that recognize different epitopes were selected among 16 different clones on the basis of epitope mapping, two for immobilization and one for horseradish peroxidase conjugation. This one-step immunoassay system is more convenient and rapid compared to a conventional two-step sandwich immunoassay system. It did not exhibit the hook effect to around 2.7 mg/ml of AFP, which is probably one of the highest concentrations of AFP in the serum. The dose-response curve of the system was linear to 500 mg/ml of AFP and the system could differentiate as low as 1 mg/ml of AFP The intra- and inter-assay variations were in an acceptable range; 95~104% and 97~105% respectively Its correlation with other commercial systems was around 95%.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.21-27
• /
• 2010

The objective of this study was to determine the effects of "Green-one" organic nutrient on mycelial growth and fruiting of P. ostreatus. The dilution concentrations of "Green-one" was treated as follows. There was control, 100, 200, 400 concentrations. That treatments were treated with step of each mycelial growth step. The best of growth steps was mycelial scratching step. At that time, DPI(Day required for primordial formation after inoculation) was shortened for 1 day. Valid germination stipe are 15 pieces, 3 pieces more than control. Stipe length and stipe diameter was long each 4mm, 3mm more than control. Pileus size is shortened than control. Yields per one bottle(g/850cc) was 146g increased 6.5% than control 137g/850cc.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.73-73
• /
• 2001

This study was to examine whether the vitrified, one-step diluted and direct transferred Hanwoo IVM/IVF/IVC blastocysts can be successfully survived in vivo and they were succeeded into the live birth. For vitrification, blastocysts were serially exposed in glycerol (G) or/and ethylene glycol (EG) mixtures [10% (v/v) G for 5 min, 10% G plus 20% EG (v/v) for 5 min, and 25% G plus 25% EG (v/v) for 30 sect] which is diluted in 10% FBS added D-PBS. Thawing of straw was carried out in air for 10 sec and then in water bath of $25^{\circ}C$ for 20 sec. One-step dilution within the straw was done in water bath of $25^{\circ}C$ for 1 min. Vitrified and one-step diluted embryos were directly transferred into 36 (natural or hormone induced synchronized) recipient cows in 6 areas of Kyungsang Buk-Do. Pregnancies were confirmed at first when recipient cows did not return to the subsequent estrus cycle, and later by manual palpation per rectum on day 45, 90 and then living calves were derived into parturition. Overall pregnancy was 33.3%(12/36), However, higher pregnancy was obtained when the recipients exhibited estrus one day earlier than the age of transferred embryos (53.3 vs 25.0-27.3%), irrespective of synchronization methods. Also, parous recipients became pregnant higher than nulliparous heifers, And, there were not different in pregnancy rates by the aspect of corpus luteum (CL) quality of recipients (good, 29.4; fair, 37.5; poor, 33.3%). One hundred eight of frozen-thawed Hanwoo blastocysts were directly transferred into 36 recipient cows. In 12 of pregnant cows, 3 cows were aborted and 9 cows were calved [single, 66.7% (6/9): twin, 33.3% (3/9)]. Total embryo implantation rate was 11.1% (12/108). However, 9 Hanwoo calves were lived. Therefore, these results demonstrate that direct transfer technique of vitrified and one-step diluted bovine blastocysts can be applied easily and effectively with the higher pregnancy rate on field trial without the equipment and embryological skills.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권4호
• /
• pp.267-275
• /
• 2011

This paper proposes a new quickly convergent pattern search quasi-Newton algorithm that employs the multi-step version of the Symmetric Rank One (SRI). The new algorithm works on the factorizations of the inverse Hessian approximations to make available a sequence of convergent positive bases required by the pattern search process. The algorithm, in principle, resembles that developed in [1] with multi-step methods dominating the dervation and with numerical improvements incurred, as shown by the numerical results presented herein.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 춘계 학술발표회 논문집
• /
• pp.269-273
• /
• 2003

We consider an efficient parametric estimation method of spatial dependence in weak stationary processes. Spatial dependence is modeled through variogram and correlogram. Most of parametric estimation methods of correlogram use two step method; nonparametric estimation and parametric integration. We bind these two steps into one step by using GEE method instead of least squares type optimization. Our one step method is more efficient statistically and gives a clear interpretation of related concepts used in traditional two step methods.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.669-690
• /
• 1998

In this paper we develop a new theory of adjoint and symmetric method in the class of general implicit one-step fixed-stepsize methods. These methods arise from simple and natral def-initions of the concepts of symmetry and adjointness that provide a fruitful basis for analysis. We prove a number of theorems for meth-ods having these properties and show in particular that only the symmetric methods possess a quadratic asymptotic expansion of the global error. In addition we give a very simple test to identify the symmetric methods in practice.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.268-269
• /
• 2014

나노입자 담지 탄소소재는 촉매재료로써 다양하게 응용되고 있으며, 이들 재료의 공정수를 획기적으로 줄이고자 솔루션 플라즈마라는 새로운 공정을 이용하여 One-Step으로 합성하는데 성공하였다. 합성된 재료의 경우 1~3nm의 미세한 나노입자가 탄소소재위에 균일하게 분산되어 있는 것을 확인 할 수 있었고, 촉매 활성 역시 매우 뛰어남을 확인 할 수 있었다.