• Design & Manufacturing
• /
• v.16 no.2
• /
• pp.33-38
• /
• 2022

Currently, Korea is an aging society, and it is expected to enter a super-aging society in about 4 years. Accordingly, many X-ray technologies are being developed. In X-rays, 99% of X-rays are converted into heat energy and 1% into light energy (X-rays). 99% of the thermal energy raises the temperature of the anode and its surroundings, and the cooling system is an important factor as overheating can affect the deterioration of X-ray quality and shortened lifespan. There is a method of forced air cooling using natural convection. Therefore, in this study, when X-rays were taken 5 times, Flow analysis was performed on heat removal according to temperature rise and cooling time for the heat generated at the anode of the X-ray tube (input power 60kW, 75kW, 90kW). Based on one-shot, the most rapid temperature rise section increased by more than 57% to 0.03 seconds, A constant temperature rises from 0.03 seconds to 0.1 seconds, It is judged that the temperature rises by about 8.2% or more at one time. After one-shot cooling, the cooling drops sharply from about 60% to 0.03 seconds, It is judged that the temperature has cooled by more than 86% compared to the temperature before shooting. One-shot is cooled by more than 86% with cooling time after 0.1 seconds, As the input power of the anode increases, the cooling temperature gradually increases. Since the tungsten of the anode target inside the X-ray tube may be damaged by thermal shock caused by a rapid temperature rise, an improvement method for removing thermal energy is required when using a high-input power supply.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.311-322
• /
• 2009

Using the 3-D analysis, this study winpared and analyzed the 'fade-shot swing' which is one of the golf technique. The subjects of this study were 3 male pro golfers they experimented with only a 7 iron. The purpose was to enhance their performance by producing the important kinematical parameters, finding out the features in them and providing the data to a coach and players. As a result, the position of the club head showed from the outside orbit to the inside orbit. When position of the center of mass moved backwards, the probability of the failure of the fade-shot increased. Cocking angle had an effect on easing the wrist for a smooth follow-through after the impact. It showed that the changes in the shoulder movement was made first and followed by the waist. The hip joint angular velocity achieved a smooth fade-shot motion due to the hitting delay also the velocity of the club-head was faster when uncocking was released at the time of impact.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.638-643
• /
• 2019

In order to reduce the cost and weight of the soft-foamed instrument-panel (IP), it was developed the new IP which is made by the two kinds of injection methods. One is the compression-injection with back-foamed foil inserted, and the other is two-shot injection with the passenger airbag door. We named it 'IMX-IP' which means that all components ('X') of the IP with different resins are made in a mold. The development procedure of this technology was introduced (1) Design of the new injection mold through TRIZ method, (2) Optimization of the injection conditions and back foamed-foil for minimizing the foam loss and thickness deviation, (3) Development of CAE for two-shot injection compression, (4) Reliability performance test and application to the mass production. The reduction of the processes through the two-shot injection with back foamed-foil inserted made it possible to enhance soft feeling on IP and reduce the cost and weight simultaneously.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.399-407
• /
• 2011

Reliability evaluation of One-Shot system which flies at speed of Mach must be evaluated as the result of many firing tests. But many firing tests are impossible because of budget deficit. Consequently the reliability prediction which substitutes firing tests is used. The accuracy of reliability prediction is decided according to a quantity of accumulated test data. If the test data is insufficient, the direction of prediction can not be set. So we propose the reliability prediction method which applies MIL-HDBK-217 Plus. MIL-HDBK-217 Plus is described about reliability prediction method without sufficient test data. So we apply MIL-HDBK-217 Plus to the rocket motor system, and we accomplish a modeling and a reliability prediction about the system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.82-88
• /
• 2018

The decoy defensive weapon system is a one-shot system. Reliability is maintained through periodic inspection and high reliability is required to confirm whether or not the functioning is normal after launch. The maintenance cycle of a decoy was set up without target reliability and reliability prediction during the development period. However, the number of operations in the military has been increasing, necessitating the optimization of the maintenance cycle. Reliability is analyzed using the maintenance data of a decoy operated for several decades and the optimal maintenance cycle is suggested. In chapter 2, data collection and classification methods are presented and analysis methodology is briefly introduced. In chapter 3, the data distribution analysis and fitness verification confirmed that applying the Weibull distribution is the most suitable for the maintenance data of the decoy. In chapter 4, we present the analysis result of percentile, survival probability and MTBF and the optimal maintenance cycle was derived from the reliability analysis. Finally, we suggest the application methods for this paper in the future.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2002

Polyurethane NCO prepolymers were synthesized with the polyols such as PTMG, GP and the isocyanate such as TDI at $40^{\circ}C$ for 8.5 minutes. As average molecular weights (${\bar{M_n}}$: 1000, 2000, 3000, 4000) of PTMG, and GP were decreased from 4000 to 1000, ratio of oil gelation increased from 298%, to 440%, for Bunker B. When oil and water were emulsified, the ratio of gelation was increased approximately two times. Ratio of gelation for emulsive Bunker B was increased from 402% to 910%, for PTMG1000 and increased from 440%, W 958% for GPI1000. Ratio of oil gelation for emulsive Bunk C which has higher viscosity than Bunker B was measured w 923% for PTMG1000 made with chain extender, i.e. EG, and measured to 1098% for GP1000. The gel made from GP which has three functional group showed soft and strong characteristic, as a result, it can be removed easily from oil spilled ocean.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.106-112
• /
• 2015

This experiment was carried out to investigate the best spray timing for the control of the bacterial shot hole with Bordeaux mixture (6-6) after wintering in the peach orchard. We sprayed Bordeaux mixture (6-6) on 'Mibaekdo', 'Yumyeong' and 'Cheonhong' of peach verities from late-March to mid-April in 2001, 2002 and 2014, and examined how much bacterial shot hole and chemical injure occurred. The infection rate of bacterial shot hole according to spray time was 10.2 to 11.7% at leaves, and 1.7 to 2.2% at fruits in 2002. And Efficacy of the Bordeaux mixture treatment for control of bacterial shot hole at full blooming time 21.2 to 30.4% at leaves, 1.7 to 4.4% at fruits in 2014. The chemical injure occurred slightly for one week hence. The fruit bearing rate was 20.7 to 29.8% at 'Mibaekdo', and 35.4 to 61.9% at 'Yumyeong' peach trees. When the spray at the time of blooming period by bordeaux mixture was investigated the control effect of bacterial shot hole disease. The infected leaves was better than 21 to 25% twice the quantity of finished products and bordeaux self-preparation about 28 to 30% base quantity of finished products, also the control efficacy was higher in infected fruits trends in bordeaux self-preparation method and twice the quantity of finished products.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.114-125
• /
• 2002

In this paper, we are proposing a hierarchical segmentation method that first segments the video data into units of shots by detecting cut and dissolve, and then decides types of camera operations or object movements in each shot. In our previous work[1], each picture group is divided into one of the three detailed categories, Shot(in case of scene change), Move(in case of camera operation or object movement) and Static(in case of almost no change between images), by analysing DC(Direct Current) component of I(Intra) frame. In this process, we have designed two-stage hierarchical neural network with inputs of various multiple features combined. Then, the system detects the accurate shot position, types of camera operations or object movements by searching P(Predicted), B(Bi-directional) frames of the current picture group selectively and hierarchically. Also, the statistical distributions of macro block types in P or B frames are used for the accurate detection of cut position, and another neural network with inputs of macro block types and motion vectors method can reduce the processing time by using only DC coefficients of I frames without decoding and by searching P, B frames selectively and hierarchically. The proposed method classified the picture groups in the accuracy of 93.9-100.0% and the cuts in the accuracy of 96.1-100.0% with three different together is used to detect dissolve, types of camera operations and object movements. The proposed types of video data. Also, it classified the types of camera movements or object movements in the accuracy of 90.13% and 89.28% with two different types of video data.

• Korean Association of Arts Management
• /
• no.49
• /
• pp.37-63
• /
• 2019

This study aims to find out how the photographing affects the satisfaction of visitor experience in the art gallery. We surveyed the visitors who visited the exhibition hall. In order to see if the selfie photographs positively affect the visitor satisfaction level, one-way ANOVA was conducted and the mediating effect of the flow and the moderating effect of narcissistic tendency and involvement was examined. As a result of study, First, in the relationship between photography and satisfaction, the group who took a photo but did not take a self-shot showed higher satisfaction than the group who did not take a photo and self-shot in the exhibition area. This result shows that photographing the art work in the exhibition hall gives experience-based satisfaction to the visitors, but self-shot does not show positive effect on the satisfaction. Second, the hypothesis that the flow degree will play a mediating role of the visitor's experience-based satisfaction in the relationship between art work photo-shot and self-shot type in exhibition hall was rejected. Third, the positive effect of involvement was shown only in the groups that did not take self-shot but took pictures in the exhibition hall. This shows that the satisfaction of the self-shot visitor is not affected by the degree of involvement of art. The results of this study are expected to help determine the policy for permission to take photographs in art galleries.