• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.149-153
• /
• 2000

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece propeller shafts composed of carbonfepoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesively bonded joint was employed to join the composite shaft and the aluminum yoke. For the optimal adhesive joining of the composite propeller shaft to the aluminum yoke, the torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element method and compared with the experimental result. Then an optimal design method was proposed based on the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and FEM analyses, it was found that the static torque transmission capability of composite propeller shaft was maximum at the critical yoke thickness, and it saturated beyond the critical length. Also, it was found that the one-piece composite propeller shaft had 40% weight saving effect compared with a two-piece steel propeller shaft.

• Composites Research
• /
• 제14권2호
• /
• pp.13-21
• /
• 2001

비강성, 비강도가 우수한 복합재료의 특성상, 기존의 금속 구조물을 복합재료 구조물로 대체 하는 것은 많은 이득을 가져온다. 이 논문에서는 탄소섬유/에폭시 복합재료와 유리섬유/에폭시 복합재료를 이용하여 정적 토크전달 능력, 비틀림 좌굴 하중. 굽힘 1차 고유진동수의 설계 기준을 만족하는 후륜구동 자동차용 일체형 동력전달축이 설계 및 제조되었다. 복합재료 중공축과 알루미늄 요크와의 결합을 위하여 단일 겹치기 접착조인트가 사용되었으며, 접착조인트의 정적 토크전달 능력은 접착길이와 요크두게에 따라 유한요소 해석을 이용하여 계산되었고, 실제 실험결과와 비교되었다. 복합재료 중공축의 정적 토크전달 능력은 Tasi-Wu 파괴지수와 아루미늄 요크와 에폭시 접착제의 비선형 물성을 적용하여 계산되었다. 실험과 해석결과로부터 복합재료 동력전달축의 정적 토크전달 능력은 임계 요크 두께에서 가장 높았으며, 임계 접착길이 이상에서는 포화되었다. 또한 일체형 복합재료 동력전달축은 기존의 2단 분리형 강철 동력전달축과 비교하여 40%의 무게 감소효과를 가져왔다.

• 소성∙가공
• /
• 제28권3호
• /
• pp.115-122
• /
• 2019

In this paper, finite element analysis of an automatic five-stage precision cold forging process of a yoke, a steering part of a passenger's car, is conducted with emphasis on spring back analysis at the yoke-forming stage and its experimental verification is subsequently made. An elastoplastic finite element method with MINI-element technique employed for the analysis of the entire process is explained. There is emphasis that the thin film of material formed between the punch and die in the stage may result to some errors especially in elastoplastic finite element analysis of spring back due to frequent remeshing. The numerical robustness of the spring back analysis in regards to remeshing is hence shown first through investigation into its effect on the predicted spring back. Experimental measurement of displacement due to spring back is carried out for comparison with the predicted results, and they are in a qualitative agreement with each other.

• 대한가정학회지
• /
• 제40권8호
• /
• pp.183-190
• /
• 2002

This study was aimed at investigating the satisfaction in relation to clothing design and size-fit for nurse uniform in Korea. The subjects were 986 female nurses working in 12 hospitals selected by convenience sampling. The data were collected by questionnaires. Using SPSS package, frequency, percentage, t-test, ANOVA and SNK test were conducted. The results were divided into 2 categories as fellows; 1) Results of the satisfaction with the size-fit and size system of the nurse uniforms : Nurses satisfied at the individual size-fit system than ready-made size system. There was a considerable difference of the satisfaction with the size-fit depending on age and clinical career. And more than half of nurses were needed the concrete and precise size system. 2) Results of the actual design condition and clothing satisfaction : Nurses wore two-piece pants suits more than classical designed one-piece style. The princess-line, convertible collar and yoke design were preferred for nurse uniform with the high satisfaction. 41.6 percent of respondents used the cap obligatory and the white color and a patterned textile were generally used. The used fabrics were only polyester and cotton/polyester mixed spinning.