• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.156-160
• /
• 1997

This paper proposed the vector controller of induction motors using one chip microprocessor. For developing a small and cheep speed control system, we use the one chip microprocessor 80C196MC. By using the one chip microprocessor we can make an inexpensive and small-sized vector controller for induction motors. We apply indirect vector control method and space vector modulation method to this system. The experimental results show that the proposed inverter has high performance features.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• 대한의용생체공학회:의공학회지
• /
• 제7권1호
• /
• pp.3-10
• /
• 1986

In this paper, a scanconverter which displays the biological signals of low frequency on CRT for the purpose of easy read-out is attempted to design for using the CRTC, and it stows some good effectivenesses The results obtained in this experiment are as follows : (1) Using only one chip, CRT controller, it can display both waveforms and characters simultaneously. (2) The flexibility of CPU program can be obtained using the sub-microproce ssor function of CRTC chip. (3) The trend of digital data is possible through the graphic function (4) The vibration of displayed waveform can be prevented using the chip simplification and the trigger signal of one chip. (5) Operation with microprocessor malies the expansion and interface easy.

• 산업기술연구
• /
• 제22권A호
• /
• pp.89-94
• /
• 2002

In this paper, a Exhaust Flow Controller (EFC) technology for uniform application of film coater and developer device is introduced that spread and remove photo resister at semiconductor manufacturing process. Because developed EFC device uses differential pressure sensing method as a differential flow meter and embodied smart A/D conversion by using a one chip microprocessor and devised by feedback Servo control, It has shown excellent performance and stability evaluation, as maximum 2000L/min flow, capability of installation to actual semiconductor equipment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1696-1698
• /
• 1998

Pulsed Nd:YAG laser using Nd:YAG crystal operates stably in the thermal conductivity, mechanical, optical condition. That is used broadly in material processings because of easy reaction to the materials, and the maintenance is very easy because of lamp excitation. In these material processings, power dinsity control is very important to improve processing technology. Power density is controled by inductance and capacitance or repetition rate. Therefore we are going to control laser power density as One-Chip Microprocessor(PIC16C55) and 8051. We have been experimented at the pulse repetition rate range of 10pps to 60pps(pulse per second).

• ETRI Journal
• /
• 제22권4호
• /
• pp.13-24
• /
• 2000

As more transistors are integrated onto bigger die, an on-chip multiprocessor will become a promising alternative to the superscalar microprocessor that dominates today's microprocessor marketplace. This paper describes key parts of a new on-chip multiprocessor, called Raptor, which is composed of four 2-way superscalar processor cores and one graphic co-processor. To obtain performance characteristics of Raptor, a program-driven simulator and its programming environment were developed. The simulation results showed that Raptor can exploit thread level parallelism effectively and offer a promising architecture for future on-chip multi-processor designs.

• 전기의세계
• /
• 제31권10호
• /
• pp.710-718
• /
• 1982

마이크로 프로세서 구조를 설명하고 대표적인 8bit microprocessor로서 Intel의 8085를 다룬다. 또한 Microcomputer System으로 쓸 수 있는 One-Chip-Processor를 토의한다.

• 전기의세계
• /
• 제31권10호
• /
• pp.719-727
• /
• 1982

마이크로 프로세서 구조를 설명하고 대표적인 8 bit microprocessor로서 Intel의 8085를 다룬다. 또한 Microcomputer System으로 쓸 수 있는 One-Chip-Processor를 토의한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.55-59
• /
• 2004

Throughout manufacturing processes, pulse shaping is required for material processing and it is regarded as an important (actor according to the specific characteristics of materials. Therefore, this study suggests a highly appropriate pulse shaping technique using a multi-switching method. This is a pulse superposition method in which one flash lamp can consecutively turn on by the double switching of the discharging system. It is possible to construct a variety of pulse shapes and pulse widths by the consecutive trigger of the silicon-controlled rectifiers (SCR) of a PIC (program integrated circuit) one-chip microprocessor. The use of this technique can provide a number of advantages to people who require suitable pulse shaping for particular applications such as welding, cutting, and drilling.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.518-525
• /
• 2004

The thermoelectric device was applied to a car seat to control the hot temperature in the summer and cold temperature in the winter. The characteristics of the device used to a car seat were analyzed. The air conditioning structure was designed to regulate the hot side of the thermoelectric device. To control the temperature of the car seat, a robust control algorithm based on the sliding mode control was applied, and a controller using one-chip microprocessor was developed. The performance of the proposed controller through experiments was shown.