• Journal of Chest Surgery
• /
• v.38 no.3 s.248
• /
• pp.229-232
• /
• 2005

Lumbar Sympathectomy is a surgery for plantar hyperhidrosis, vascular and other reflex sympathetic diseases and has a various indications and physiologic effects. However it is not performed actively compared to thoracic sympathectomy because of its invasiveness. Therefore, we tried to perform lumbar sympathectomy using mediastinoscopy with small incision and introduce this new surgical technique. Material and Method: From July 2003 to December 2004, 18 patients undewent lumbar sympathectomy with mediastinoscopy at Inje University Sanggye Paik Hospital. There were 12 males and 6 females whose mean age was 24.3$\pm$8.2 years ranging from 18 to 67 30 cases of lumbar sympathectomy was performed with mediastinoscopy of which 24 cases were for plantar hyperhidrosis and 6 cases for other diseases. Result: Mean operation time was 37.2$\pm$12.5 minutes and mean post operation hospital stay was 3.1$\pm$2.2 days. There was one post sympathetic neuralgia and one peritoneal opening. Conclusion: Lumbar sympathectomy using mediastinoscopy is a simple and effective technique and has the advantage of cosmetics, post operative pain and hospital stay. However, further studies with large number of cases should be carried out for better outcome.

• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.1009-1016
• /
• 1999

Background: Minimally invasive direct coronary artery bypass surgery(MIDCAB) has been increasing in interest along with the new techniques in myocardial immobilization for easier and safer procedures. Until the opening of the era of new techniques, adequate accuracy and good patency of grafts were debatable. Our experiences of MIDCAB were studied according to the stages of technical developments. Material and Methods: Since March 1996, 55 patients have undergone MIDCAB procedures. The patients of off-pump CABG(no cardiopulmonary bypass under full sternotomy) were excluded from the study. In the early experience(Stage I), a left anterior small thoracotomy through the left parasternal incision was performed(n=6); then an approach through the lower partial sternotomy was used(Stage II, n=33); and recently, a chest wall elevator for harvesting the internal thoracic artery and the foot plate for myocardial immobilization have been used(USSC, Norwalk, CT)(Stage III, n=16). Result: The surgical procedures of four patients in the Stage II group have been converted to conventional bypass because of the deeply seated left anterior descending coronary artery in two patients, fracture of the calcific lesion in the right coronary artery in one patient, and a cardiogenic shock during hypothermia in the other patient with ventricular dysfunction. Two patients in stage II experienced symptomatic recurrences after surgery and restenosis was verified on angiocardiography. They were managed by interventional procedures. All the other patients were doing well without symptoms, except one patients in Stage II who underwent PTCA procedure for a lesion in the circumflex artery during the follow up period. Conclusion: The new and specialized devices are essential to the development of MIDCAB surgery. MIDCAB and the hybrid procedures in multi-vessel disease are on the way to further development. So far, our experience is limited only to a single device among the many new devices for the purpose.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.1
• /
• pp.99-104
• /
• 2005

Purpose: The purpose of this study was to investigate usefulness of locking compression plate (LCP) as an open reduction technique by evaluating clinical results obtained from the patients with lateral malleolar fracture treated by internal fixation using LCP after open reduction. Materials and Methods: Among the patients with lateral malleolar fracture, the 28 patients who were treated by internal fixation using Locking compression plate after an open reduction and were able to be followed up for more than 6 months were included in this study. Final postoperative evaluation was done based on the Meyer's clinical and radiologic evaluation system. Results: All cases achieved anatomical reduction and fixation of the reduction postoperatively. 28 minutes were taken meaningly from the incision to the fixation of LCP plate after the anatomical reduction. Everage bony union time was 8.2 weaks, and the result was excellent in 23 cases (82%), good in 5 cases (17%) and poor result was abscent according to the criteria of Meyer et al. One case of post traumatic arthritis and one case of superficial infection on the operation site were found, but non-union, delayed union and malunion were not occurred. Conclusion: The internal fixation after open reduction using LCP is an effective treatment method in treating lateral malleolar fracture of the ankle since it offers advantages including easy application and a greater stability due to its capability of maintaining exact anatomical reduction even though the screw does not penetrate the medial cortex of fibular to add the stability and rigidity of the fixation.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.353-358
• /
• 2013

Background Robots have allowed head and neck surgeons to extirpate oropharyngeal tumors safely without the need for lip-split incision or mandibulotomy. Using robots in oropharyngeal reconstruction is new but essential for oropharyngeal defects that result from robotic tumor excision. We report our experience with robotic free-flap reconstruction of head and neck defects to exemplify the necessity for robotic reconstruction. Methods We investigated head and neck cancer patients who underwent ablation surgery and free-flap reconstruction by robot. Between July 1, 2011 and March 31, 2012, 5 cases were performed and patient demographics, location of tumor, pathologic stage, reconstruction methods, flap size, recipient vessel, necessary pedicle length, and operation time were investigated. Results Among five free-flap reconstructions, four were radial forearm free flaps and one was an anterolateral thigh free-flap. Four flaps used the superior thyroid artery and one flap used a facial artery as the recipient vessel. The average pedicle length was 8.8 cm. Flap insetting and microanastomosis were achieved using a specially manufactured robotic instrument. The total operation time was 1,041.0 minutes (range, 814 to 1,132 minutes), and complications including flap necrosis, hematoma, and wound dehiscence did not occur. Conclusions This study demonstrates the clinically applicable use of robots in oropharyngeal reconstruction, especially using a free flap. A robot can assist the operator in insetting the flap at a deep portion of the oropharynx without the need to perform a traditional mandibulotomy. Robot-assisted reconstruction may substitute for existing surgical methods and is accepted as the most up-to-date method.

• Korean Journal of Bronchoesophagology
• /
• v.15 no.2
• /
• pp.64-70
• /
• 2009

Descending necrotizing mediastinitis(DNM) can occur as a complication of oropharyngeal and cervical infections that spread to the mediastinum via the cervical spaces. Delayed diagnosis and inadequate mediastinal drainage through a cervical or minor thoracic approach are the primary causes of a high mortality rate. Therefore, We emphasize that aggressive and emergent mediastinal drainage by surgical approach is most important method of DNM treatment. We studied 5cases diagnosed as DNM from 2005 through 2007. All patients underwent emergent surgical drainage of deep neck infection combined with mediastinal drainage through a thoracic approach. Primary oropharyngeal infection lead to DNM in four cases(80%) and odontogenic abscess in one case(20%). The outcomes were favorable 5patients. Overall mortality rate was 0%. The time interval from diagnosis based on manifestation of initial symptoms(oral or pharyngolaryngeal area) to surgical intervention was $7.4{\pm}4.2$days. One patient required reoperation due to remnant mediastinal abscess and pericardial effusion. Early diagnosis and emergent combined drainage with neck and chest incisions, together with broad spectrum intravenous antibiotics, should be considered standard care for this disease. And intensive postoperative care which it is continuous mediastinal irrigation and antibiotics use can significantly reduce the mortality rate.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.251-256
• /
• 2011

Purpose: A nasolabial cyst is a rare non-odontogenic, soft-tissue, developmental cyst arising anywhere on the face inferior to the nasoalar region. It is thought to arise from either epithelial remnants trapped along the lines of fusion during the development of face or the remnants of the developing nasolacrimal duct. This study examines various features of nasolabial cysts with bony involvement to provide a basis for correct diagnosis and treatment. Methods: Eight cases of nasolabial cyst treated in Soonchunhyang Hospital between March 2002 and July 2010 were examined in terms of their clinical features and radiological and histological findings. Seven patients underwent surgical excision of the cyst via an intraoral, sublabial approach. One underwent incision and drainage. Results: Our eight patients were seven women and one man. The most frequent symptoms and signs were facial deformity and swelling of the nasolabial fold. Computed tomography (CT) showed a well-circumscribed cystic mass lateral to the pyriform aperture. Seven cases had erosive lesions on CT, and the intraoperative findings were consistent with a nasolabial cyst with a bony defect. Typical histopathological findings showed that these cysts were most frequently lined with respiratory epithelium with ciliated columnar cells and cuboid cells. No patient developed complications or recurrences. Conclusion: A nasolabial cyst is often unrecognized or confused with other intranasal masses, including fissural and odontogenic cysts, midface infections, or swelling in the nasolabial area. Therefore, a careful clinical and radiological evaluation should be preformed when considering the differential diagnosis. We present eight patients with nasolabial cysts treated via a gingivobuccal approach with excellent functional and cosmetic results.

• Archives of Craniofacial Surgery
• /
• v.13 no.2
• /
• pp.104-110
• /
• 2012

Purpose: Who may dare to state that optimal choice of treating nasal bone fracture is closed reduction? Few decades of authors' experience in nasal bone fracture has lead to believe that more active and assertive approach in nasal bone fracture by performing simultaneous lateral osteotomy may be applied in proper indications to acquire more accurate reduction and cosmetically satisfying result. Methods: From May 2008 to October 2009, among 241 nasal bone fracture patients, 20 patients underwent simultaneous lateral osteotomy with nasal bone fracture reduction. Followed by rigid septal correction, nasal cavity is packed to stabilize the fracture segment for safer osteotomy. Through intranasal incision, in selected cases of difficult reduction or for cosmetic purposes, various types of lateral osteotomy was performed corresponding to the fracture anatomy, conditions of the nasal cavity. Postoperative nasal packing was retained for one week and nasal dorsum splint for 3 weeks. Results: Lateral osteotomy was utilized for difficult cases of closed reduction, for correction of wide nose, hump and deviation in 9, 5, 2, and 4 cases, respectively. Patient satisfaction was scaled 90% in satisfaction and moderate in 10% (2 cases), complaining of mild nasal tip deviation. Physicians detected 2 cases of apparent deformity with patient recognition; one patient with mild step deformity at the osteotomy site and the other patient with minimal implant mobility. Conclusion: By accompanying profound understanding of the fracture anatomy, more active and assertive approach in nasal fracture reduction can be coincide with simultaneous lateral osteotomy to reduce the rate of secondary deformity and to obtain more cosmetically satisfying result.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1187-1192
• /
• 2001

Objective : The lateral extracavitary approach(LECA) to the thoracolumbar spine is known as one of procedure which allows not only direct vision of pathologic lesion, but also ventral decompression, and dorsal fixation of the spine through the same incision. However, some drawbacks of LECA, including the technically- demanding, time-consuming, unfamiliar surgical anatomy and excessive blood loss, make surgeons to hesitate to use this approach. This study is to provide the surgical anatomy of LECA using cadavers, for detailed informations when LECA is considered for the surgery. Methods : We performed the 10 cadaveric studies, 7 male and 3 female, and careful dissection was carried out on right side of thoracolumbar region, except one for thoracic region. The photographs with micro-lens were taken to depict the close-up findings and for demonstrating detailed anatomy. Results : The photographs and hand-drawings demonstrated the relationships among the musculature, segmental vessels and nerve roots seen during each dissection plane. The lateral branches of dorsal rami of spinal nerve and the transverse process were confirmed to be the most important landmark of this approach. Conclusion : We concluded that detailed anatomical findings for LECA through this step-by-step dissection would be useful during operative intervention to reduce the intraoperative complications in LECA.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.399-402
• /
• 2007

Purpose: Arteriovenous fistula is one of high flow vascular malformations. Recently, arteriovenous fistula has been regarded as one of the type of arteriovenous malformations. The patients were diagnosed as arteriovenous malformation Schobinger clinical stage II. Even though arteriovenous fistula rarely occurs on head and neck, treatment of that is difficult due to frequent recurrence. In treating the arteriovenous fistula, chemical embolization, surgical excision and other treatment modalities were used, but the results were not satisfactory. The authors experienced three cases of arteriovenous fistula and treated them with surgical excision. Methods: In cases, warmth, enlargement, pulsation, thrill, and bruit were found. For the accurate evaluation before the operation, angiography and MRI were checked in advance. Incision was made on the site of pulsation. The artery and vein connected to the arteriovenous fistula were dissected widely, individually ligated, and divided. And then the entire mass was totally removed. Results: All surgical sites were healed well without complications and there was no evidence of recurrence in all cases up to for 2 years of follow-up examination. Conclusion: The arteriovenous fistula on face is a very rare disease and has difficulties in treatment. The authors experienced three cases of arteriovenous fistula with complete surgical removal and no recurrence was found in all cases.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.597-602
• /
• 2013

Background The forehead, which occupies about one third of the face, is one of the major determinants of a feminine or masculine look. Various methods have been used for the augmentation of the forehead using autologous fat grafts or alloplastic materials. Methylmethacrylate (MMA) is the most appropriate material for augmentation of the forehead, and we have used an injection-molding technique with MMA to achieve satisfactory results. Methods Under local anesthesia with intravenous (IV) sedation, an incision was made on the scalp and a meticulous and delicate subperiosteal dissection was then performed. MMA monomers and polymers were mixed, the dough was injected into the space created, and manual molding was performed along with direct inspection. This surgery was indicated for patients who wanted to correct an unattractive appearance by forehead augmentation. Every patient in this study visited our clinics 3 months after surgery to evaluate the results. We judged the postoperative results in terms of re-operation rates caused by the dissatisfaction of the patients and complications. Results During a 13-year period, 516 patients underwent forehead augmentation with MMA. With the injection-molding technique, the inner surface of the MMA implant is positioned close to the underlying frontal bone, which minimizes the gap between the implant and bone. The borders of the implant should be tapered sufficiently until no longer palpable or visible. Only 28 patients (5.4%) underwent a re-operation due to an undesirable postoperative appearance. Conclusions The injection-molding technique using MMA is a simple, safe, and ideal method for the augmentation of the forehead.