• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.863-867
• /
• 2003

This paper aims at the development of shoes measuring the performance of walking or running, which is equipped with electronic devices. In the in-sole of the shoes, a piezoelectric sensor is inserted for measuring the number of steps and the speed of walking. The measured signals are processed by the one-chip microprocessor and related electronic devices. Using the data, the momentum and calories of walking and running are calculated, and the results are transmitted to the displaying system composed of LCD by the RF telecommunication system.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.250-253
• /
• 1989

As the necessity of increasing the midnight base load is extensively increased, electric power companies have to increase the demand of midnight electrical power by lowering the electrical charge rate at midnight. One of the most widely used midnight equipments is the heat Storage type's electrical boiler. A Single chip microprocessor controller for the heat-storage type's electrical boiler is developed. This controller call reduce the undesirable peak load at the begining of midnight (i.e.11 P.M.) time band by using backward load control method. Futhermore, this controller enables reservation of heat storge and the effective heating control the field test has been done by use the boiler for 66$m^2$ with the heater of 21KW quality.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.100-102
• /
• 2001

This paper resents digital controller of emergency power generator system. The controller offers an integrated alternative for Genset control, metering and remote monitoring. Proposed controller used 80c196kc one chip microprocessor for digital control, it measures parameters of generator and provides output signals to control starting and stopping of generator. Additionally protection and alarm functions are considered to system stability. As almost parts of controller are embedded by digital microprocessor and FPGA techniques, the controller has a more flexible feature and an improvement of precision. The developed system has a big merit economically and is suitable for any kW size generator.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.7-9
• /
• 2007

If used to drive the minicar, the BLDC Motor has advantages of weightless, efficient, small-size and credibleness. In this paper at first the position detecting method for BLDC was introduced, secondly the simulation of control algorithm was done and at last the prototype controller based one chip processor MEGA48 was fabricated. The controller proposed has characteristic of cheap cost, reliable performance and totally meeting demands of minicar control.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.318-321
• /
• 1997

This paper is about improving characteristic of plant by using micro-step driver method in 5 phase step motor for satisfying the condition of low oscillation and high accuracy in soldering machine. We choose open loop control method for minimizing hardware system and use one chip microprocessor, power MOSFET nd some device to realize accurate micro-step driver system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.530-534
• /
• 1989

In this paper we addressed the basic concept of microstepping, analyzed the combined effect of the motor detent torque and the current profile, and implemented a microstepping drive system using an one-chip microprocessor, power MOSFET's, and a 1.8 degree bifilar-wound hybrid-type step motor excited by a bipolar drive. Experimental results show that microstepping produces greater resolution, eliminates resonant step loss, and reduces motor vibrations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.186-189
• /
• 1997

To monitor abnormal state of rotary compressor, methods for acquisition and processing of Acoustic Emission(AE) signal are arranged and optimal AE parameter for monitoring is determined. The detecting method of abnormal compressor in real time is suggested and special-purpose minitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor in low cost.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.102-106
• /
• 1986

A digital telephone set for a voice/data PABX has been implemented with 3 semicustom IC`s, and one-chip microprocessor, etc. It adopts TCM(Time Compression Multiplexing) digital transmission method, and has the capacity of 144kb/s full-duplex digital transmission.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.297-300
• /
• 1987