• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.549-555
• /
• 2008

Analytical method to analyze the tolerance effect on the vehicle ride comfort is suggested in this paper. Ride comfort is one of the most important performance indices which decide the vehicle design quality. In general, the ride comfort is affected by the variations of parameters of a vehicle model. Therefore, the effects of the parameters on the ride comfort need to be evaluated statistically based on the whole-body vibration of the vehicle. In this paper, weighted RMS values of the acceleration PSD of a seat position are used to define the ride comfort. The equations of motion and the sensitivity equations are derived based on a 5-DOF vehicle model. By employing the sensitivity information of the acceleration at the seat position, the tolerance effect on the vehicle ride comfort could be effectively analyzed.

• 한국지역사회생활과학회지
• /
• 제17권2호
• /
• pp.49-60
• /
• 2006

It was measured the energy expenditure in each season, the cold tolerance in winter and the heat tolerance in summer. Farmers' adaptability to the change of environment was compared with those of city-dwellers such as indoor workers and street cleaners to determine the effect of living environment, especially living temperature, on the health of human body. It turned out that farmers had experienced wide range of temperature that was higher in summer and lower in winter than indoor workers. Farmers and street cleaners showed seasonal adaptation in energy expenditure, which was high in winter and low in summer. However, indoor workers did not show seasonal changes. Energy expenditure had an inverse correlation with the temperature in work place where subjects spend the longer time in a day except in female indoor workers in Seoul. And It was proved that farmers and street cleaners had stronger cold tolerance and heat tolerance than indoor workers.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.232-239
• /
• 2008

We investigated how the polarization-mode dispersion (PMD) tolerance was degraded by semiconductor optical amplifier (SOA)-induced chirp for the 10 Gb/s nonreturn-to-zero (NRZ), duobinary NRZ, return-to-zero (RZ), and carrier-suppressed RZ (CS-RZ) modulation formats. The power penalty was calculated as a measure of the system performance due to PMD for a given SOA-induced chirp. Considering only first-order PMD, all modulation formats have a similar PMD tolerance regardless of SOA-induced chirp. On the other hand, when both first- and second-order PMD are considered, the PMD tolerance of all modulation formats with the exception of the CS-RZ modulation format are degraded by SOA-induced chirp. Among all modulation formats considered here, the NRZ modulation format has the PMD tolerance with the highest sensitivity to SOA-induced chirp. When the peak-to-peak chirp induced by SOAs is $0.28{\AA}$, its PMD tolerance is degraded up to 4 dB for a differential group delay (DGD) of 50 ps. However, the PMD tolerance of the CS-RZ modulation format is largely unaffected by SOA-induced chirp.

• Journal of Microbiology and Biotechnology
• /
• 제31권6호
• /
• pp.840-846
• /
• 2021

To improve the bile salt and acid tolerance of probiotics against gastrointestinal stresses, we investigated the effects of soybean lecithin and whey protein concentrate (WPC) 80 on the bile salt tolerance of Lacticaseibacillus paracasei L9 using a single-factor methodology, which was optimized using response surface methodology (RSM). The survival rate of L. paracasei L9 treated with 0.3% (w/v) bile salt for 2.5 h, and combined with soybean lecithin or WPC 80, was lower than 1%. After optimization, the survival rate of L. paracasei L9 incubated in 0.3% bile salt for 2.5 h reached 52.5% at a ratio of 0.74% soybean lecithin and 2.54% WPC 80. Moreover, this optimized method improved the survival rate of L. paracasei L9 in low pH condition and can be applied to other lactic acid bacteria (LAB) strains. Conclusively, the combination of soybean lecithin and WPC 80 significantly improved the bile salt and acid tolerance of LAB. Our study provides a novel approach for enhancing the gastrointestinal tolerance of LAB by combining food-derived components that have different properties.

• 식물조직배양학회지
• /
• 제27권4호
• /
• pp.339-343
• /
• 2000

When plants are exposed to subfreezing temperatures ice crystals are forming within extracelluar space in leaves. The growth of ice crystal is closely related to the degree of freezing injury. It was shown that an antifreeze protein binds to an ice nucleator through hydrogen bonds to prevent growth of ice crystal and also reduces freezing damage. The antifreeze proteins in plants are similar to PR proteins but only the PR proteins induced upon cold acclimation were shown to have dual functions in antifreezing as well as antifungal activities. Three of the genes encoded for CLP, GLP, and TLP were isolated from barley and Kentucky bluegrass based on amino acid sequence revealed after purification and low temperature-inducibility as shown in analysis of the protein. The deduced amino acid of the genes cloned showed a signal for secretion into extracellular space where the antifreezing activity sup-posed to work. The western analysis using the antisera raised against the antifreeze proteins showed a positive correlation between the amount of the protein and the level of freeze tolerance among different cultivars of barely. Besides it was revealed that TLP is responsible for a freeze tolerance induced by a treatment of trinexapac ethyl in Kentucky bluegrass. Analysis of an overwintering wild rice, Oryza rufipogon also showed that an acquisition of freeze tolerance relied on accumulation of the protein similar to CLP. The more direct evidence for the role of CLP in freeze tolerance was made with the analysis of the transgenic tobacco showing extracellular accumulation of CLP and enhanced freeze tolerance measured by amount of ion leakage and rate of photosynthetic electron transport upon freezing. These antifreeze proteins genes will be good candidates for transformation into crops such as lettuce and strawberry to develop into the new crops capable of freeze-storage and such as rose and grape to enhance a freeze tolerance for a safe survival during winter.

• 한국안전학회지
• /
• 제22권6호
• /
• pp.20-26
• /
• 2007

The new integrated CAD-CAM systems induce an increasing demand for simulation tools, which are able to simulate industrial part assembly processes by welding, gluing, riveting or bolting(more generally by fastening). Concerning fastened flexible parts, there exist no efficient computational aid on tolerance and methodology available on the field. The first part briefly presents the approach method based on the finite element method for TADA(Tolerance Analysis of Deformable Assemblies). The second part compares the results obtained by simulation using the commercial FEM code with the measurements. The principal elements of dispersion have been identified and studied on an experimental basis in order to test the robustness of the TADA model. This has enabled us to verify the model's possibilities as regards industrial constraints such as the use of incompatible meshes or the use of triangular elements and so on.

• Journal of Multimedia Information System
• /
• 제7권2호
• /
• pp.157-164
• /
• 2020

Considering the frustration affordability level of college entrants and investigating the frustration tolerance of undergraduates in Shenyang City University, this paper provides the basis for the research of improving frustration tolerance of undergraduates through quantitative research results and applies film therapy to the frustration regulation of college students by discussing the role of film therapy in improving frustration affordability ability of college entrants. This paper has concluded that the necessary of improving the frustration tolerance of college students in Northeast China and the feasibility of the film therapy programs on improving the frustration tolerance of college students in Northeast China. Meanwhile, this paper shows that the principle of film selection in film therapy should be based on the requirements of the aesthetics of the film industry in the IT environment. This paper provides a reference for refining the target of film therapy for film therapists to better apply film and television psychotherapy technology, and a basis for the film therapy activity program; Furthermore, it also has a certain reference significance for film and television media workers.

• 품질경영학회지
• /
• 제7권2호
• /
• pp.3-6
• /
• 1979

The Specification-Oriented Control Chart is obtained by moving from the tolerance limits toward the center line. And when chart are based on center lines, no automatic tie-in with tolerance is provided. The author recomend the Specification-Oriented Control Chart in instances where tolerance limits on the individual unit or product must be met.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.85-94
• /
• 2014

Tolerance accumulation has serious effect on the performance of an assembled body. This paper proposes the method which analyzes tolerance accumulation using Monte Carlo Simulation. This method can predict tolerance distribution of fully assembled body using the dimensional tolerance distribution of each part to be assembled. In this analysis, it is assumed that the tolerance of each part has the nominal distribution or uniform distribution. This analysis method is applied to ECV(External Control Valve), and the accumulated tolerance of the fully assembled ECV is obtained from the analysis. The results show that initial tolerance given to each part do not meet the design requirement of ECV. Hence, the tolerances of each part are modified and the additional analysis with the modified tolerances yields the results which satisfy the design requirements of ECV.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.61-70
• /
• 1993

The concept of producer's tolerance, in contrast to the consumer's tolerance, is a natural consequence of continuous loss functions. It is based on the premise that any unit product whose quality characteristic deviated from its traget value inflicts a loss, and that this less is a continuous monotonically increasing function of the magnitude of deviation. This concept of the emphasis on loss function to improve quality of products on the side of customer is introduced by Taguchi. This paper considers the problem of determining the optimum producer's tolerance by continous loss fuction of Taguchi and proposes a probablistic model for the problem. The difference between the proposed probablistic approach and the approach taken in Taguchi is also pointed out.