• Research in Community and Public Health Nursing
• /
• v.6 no.1
• /
• pp.34-54
• /
• 1995

Occupational health services in Korea have been operated as dual types: one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative. health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area: 154 places (39.4%) managed by designated. health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation due to the characterstics of each variable and analyzed for impacting factors with relation to the using multiple regression analysis using SPSS PC program, especially using t -test method in order to compare each type of health care management. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. The common sickness management is the most accomplished item in health care area of occupational health care services, while the preventive care and control for the workers who have serious health problems are insufficient in workers health care area. 3. An insufficient accomplishment of overall health education has been shown because it is difficult to perform health education due to almost no chance of the direct introduction at workplaces. Therefore a strong support system for making and supplying the media is necessary in order to activate indirect health education by means of media. 4. Because health care managers and the agencies managers where take the workplaces for this study are almost nurses who have been comparatively high work site rounding rate about an environmental management at the workplaces, that non-profession can also do it, the activities about the professional area not enough. Therefore, an appropriate referral system should be established in order to complement professional area. 5. Two factors which have an effect on the coverage rate of occupational health care services are : one is those from the workplaces such as type of services, the number of workers, the number of harzadous factors and safety & health committee, the other from health care organization about whether there is its own manager or not.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1131-1139
• /
• 2020

The static analysis of the source code is to find the remaining security weaknesses for a wide range of source codes. The static analysis tool is used to check the result, and the static analysis expert performs spying and false detection analysis on the result. In this process, the amount of analysis is large and the rate of false positives is high, so a lot of time and effort is required, and a method of efficient analysis is required. In addition, it is rare for experts to analyze only the source code of the line where the defect occurred when performing positive/false detection analysis. Depending on the type of defect, the surrounding source code is analyzed together and the final analysis result is delivered. In order to solve the difficulty of experts discriminating positive and false positives using these static analysis tools, this paper proposes a method of determining whether or not the security weakness found by the static analysis tools is a spy detection through artificial intelligence rather than an expert. In addition, the optimal size was confirmed through an experiment to see how the size of the training data (source code around the defects) used for such machine learning affects the performance. This result is expected to help the static analysis expert's job of classifying positive and false positives after static analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.470-475
• /
• 2016

The purpose of this study is to propose the revitalization of the existing senior cultural activity centers as a new venue for the social and cultural activity of the baby-boom generation. Unlike the previous generation of seniors, the baby-boom generation (born in 1955-1963) has a strong desire to actively participate in various social activities, as well as working for their living. In order to meet their needs, it is proposed that the existing senior cultural activity centers be redesigned and transformed from an elderly welfare perspective. The data were collected using a structured questionnaire including questions on the socio-economic background, need for cultural activities, social activities, and job-training programs. The data collected from a total of 229 baby-boomers were used for the final analysis by cross-tabulation. The major findings are as follows: most of the baby-boom generation strongly agreed that they were very different from the previous elderly generation in terms of their education and social and economic environment. Therefore, a new system for the senior cultural activity centers which can integrate these various needs is suggested to encourage the baby-boomers to participate more actively, even after their retirement. Based on the research results, a new paradigm for the senior cultural activity centers is proposed in order to enhance their quality. The application and practice of our research results would be very important, because larger numbers of baby-boomers are gradually retiring from the workforce, and it is necessary to ensure their ongoing integration in society for the further development of society in general.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.4
• /
• pp.285-292
• /
• 2022

The education and training system, the ISCO (International Standard Classification of Occupations), and the legal systems of Japan and the United States consider all ophthalmic optometry laboratory personnel as ophthalmologists. They encompass optometrists, orthoptists, optometric technicians, and ophthalmic medical technicians. Data retrieved from the KOSIS (Korean Statistical Information Service) revealed that the number of opticians associated with the department of ophthalmology in 2022 could be appraised by classifying their medical institutions; contrarily, the number of clinical laboratory technologists could not be assessed. However, the current research investigated a general tertiary hospital and determined that clinical laboratory technologists outnumber opticians. Classification in Korea is based on ophthalmic optometry laboratory personnel, ISCO, ISCED (International Standard Classification of Education), the medical service act, the act on medical service technologists, and the higher education act. These results cannot be compared to the optometrists evaluated in the United States. Ophthalmology is a suitable profession for optometric technologists and technicians who perform under the instructions of ophthalmologists and optometrists. The field of eye healthcare would be benefitted by assigning the management based on their qualification according to the requirement of the job title, such as 'Clinical Optometry Technologist' to be given to clinical laboratory technologists and opticians who work in the ophthalmic optometry laboratories after obtaining a private qualification endowed by the Korean Ophthalmological Society and the Korean Optometry Society.

• Korean Journal of Community Nutrition
• /
• v.7 no.6
• /
• pp.833-843
• /
• 2002

This study was carried out to investigate the effect of hygiene education on the microbiological changes of processing utensils and the environmental in the manufacture of cereals and to evaluate the Cd, Pb contents and nutrient compositions of 11 cereals. The result of microbiological evaluation was that fungi, coliforms and staphylococcus species were detected in employees, on equipment, utensils and environments in the first inspection. Fungi were detected in most of the cereals, staphylococcus species were detected in soybeans, perilla seeds and sea tangle How, and bacillus cereus was detected in sorghum and black sesame seeds. The water content of rice, barley, glutinous rice, brown rice and carrot flour in packaged products, and in carrot flour, angelica keiskei, carrot, sea mustard and potato in bulk products was in excess of 8.0%. The Pb content of cereals was 0.14-0.51 mg/kg and Cd was not found. The acid value of Job s tears flour and black sesame seed flour was higher than 5.0 mg/g oil. Cereals were manufactured from 41 different cereals and grains, legumes, seeds and nuts, vegetables, potatoes, seaweeds, fruits, glucose and salt. The average content of cereals and grains, legumes, and seeds and nuts in cereals was 75.75%, 16.19% and 4.93%, respectively. The mean nutrient content per 100 g of cereals was calories 365.8kcal, protein 13.3 g, fats 5.9 g, carbohydrates 63.4 g, Ca 91.8 mg, p 269.9 mg, Fe 3.15 mg, Na 76.2 g, K 421.8 mg, Zn 2.33 mg, Vit. A 12.5 R.E., Vit. B$_1$0.23 mg, Vit. $B_2$ 0.16 mg, Vit. $B_6$ 0.46 mg, Niacin 3.5 mg, Vit. C 1.36 mg, folic acid 62.3 $\mu$g and Vit. E 1.24 mg. When nutrients value of 48 g of cereals and 200 $m\ell$l of milk was compared to 1/3 of the RDA, the values were below than 60% of 1/3 of the RDA except Na, K, Vitamin $B_1$ and C contents. The average carbohydrate : protein : fat ratio of energy intake was 54.27 : 17.45 : 28.28, respectively. Therefore, a training program consisting of the education of the staff in surveillance and standard operating procedures, the elimination of dangerous procedures, sanitation checklist, the implementation of Preparation methods and standard recipes for cereals is required.

• Journal of agricultural medicine and community health
• /
• v.17 no.1
• /
• pp.5-16
• /
• 1992

The maternal and child health is a basis of national health, and indicates the level of social welfare and health of the country, because it is related with community welfare status, general cultural conditions, and medical and health sciences. This is a study carried out to identify the present practices of maternal and child health care programs implemented by the private clinics located in Guns(counties ; rural area) in Kyungsangnam Province and to propose alternatives to improve their current programs through a self-administrative questionnaire. The subjects were 90 private physicians who operated their own clinics since 1990 and were general practitioners, Obstertrician/Gynecologists or pediatricians: This survey was conducted by mail from 15 January to 25 February 1992. The response rate was 94.4 percent. 1) The major manpower for MCH programs of the studied clinics was physicians and nurseaids. 70.3% of physicians were general practitioners, 81.1% of nursing manpower were nurseaids. 31.1% of the studied clinics employed lab-technicians. 89.2% of them had MCH room whatever the size and the setting, and 84.4% of Ob/Gyn clinics installed laboratory equipments. 2) 55.4% and 63.5% of the studied clinics provided 151 or above consulting services and curative services of MCH per physician a month respectively and 33.8% and 25.7% of them provided 10 or less consulting services and curative services per physician a month. 91.9% of lab-technicians had 10 or less laboratory tests per technician a month. 3) There was a difference between Ob/Gyn and pediatric clinics in terms of services delivered : for example, 80% of Ob/Gyn clinics provided pre- and post- natal care services, while 84.6% of pediatric clinics provided vaccinations for children. It was also found that only a few of general practitioners involved pre-and post- natal care services. 4) There were no clinics which had opened regular health education session but 24.3% of them had opened the sessions irregularly. Ob/Gyn clinics put emphasis on maternity and pediatric clinics did on child health, but general practitioners touched with both maternal and child health. 21.6% of the studied clinics had some kind of educational materials for MCH programs. Most of the materials were pamphlets or small booklets. 5) Proteinuria/glucosuria, blood pressure and blood type were tested in 48.6~69% of the studied clinics ; tests for blood sugar and hepatitis B were provided in 39.2~41.9% of them, most of them were done in Ob/Gyn clinics. 6) 41.9% of physicians, 29.7% of nurses and 45.9% of nurses-aids wanted to receive on-job-training for MCH programs.

• Korean Security Journal
• /
• no.58
• /
• pp.195-213
• /
• 2019

「Security Services Industry Act」made in 1976 for the purpose of contributing to the good operation of services industry by establishing the requirements for promotion, development and systematic management of services industry has been since 26 times of overall revisions. Period division of private security through overall revision of 「Security Services Industry Act」 can be roughly divided into three periods. The first is a settlement period. It is a period when the present five business areas were completed rom 1976 to 2001. Beginning with facility and escort security in 1996, five types of jobs have been prepared. so far by adding personal protection in 1996, and machine and special security in 2001. The second is a quantitative growth period. It is a period when quantitative development is made on the institutional basis. As various culture, sports and arts events are increasing based on the demand of security services due to an increase in the people's sense of security, quantitative development was made, which additionally influenced the downward trend of capital and the possibility of having two jobs through revisions. The third is a qualitative growth period. From 2013 to the present is a period when quantitative growth has slowed and qualitative growth has been made. After the period of quantitative growth, the growth slowed down. However, by raising the criteria for permission of services industry through creation of a rule for the group civil petition, by raising capital, by institutionally compensating for diverse punishment regulations, by realizing the training hours for new security guards, by permitting private education, etc, the reliability and professionality of a security guard job has been to be recovered.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.57-89
• /
• 2013

Animation tool has been made changes rapid development of animation from analog tool to digital authoring tool. Depending on the change in the status of digital authoring tools, education of digital authoring tool has brought many changes occurred in the institute and university. Digital authoring tool was insufficient for research of authoring tool due to the recognition that authoring tool is a simple tool. I try to resolve the difficulties through the analysis digital authoring tools to students studying at the university. In addition, Suggests social/cultural change of animation practitioners and effective training methods of digital authoring tools in the education of beginners and practitioners. This tool have perceptual knowledge and narrative knowledge. Since the language features and knowledge features is difficult to learn. it must be learned knowledge of computer graphics of professional level properly to learn. Then users should try to be creative within the authoring tool to produce creative results. also formed the community and to exchange information for self-development further it should form job market that authoring tool make formed through medium. So, I think that there is a need to change academically attitude to authoring tool. because this is not only the positive side but it occurs phenomenon to enslave users in authoring tool, and blind faith in the authoring tool or critical stance on software. It was a lot of pre-existing research that investigate engineering and industrial side in the authoring tool. Through this thesis, We will find social/cultural features and academic significance, and investigate that how to approach the method of education.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.610-619
• /
• 2016

Digital manufacturing (DM) technology helps engineers design products promptly and reliably at low production cost by simulating a manufacturing process and the material behavior of a product in use, based on three-dimensional digital modeling. The computing infrastructure for digital manufacturing, however, is usually expensive and, at present, the number of professional design engineers who can take advantage of this technology to a product design accurately is insufficient, particularly in small and medium manufacturing companies. Considering this, the Korea Institute of Science and Technology Information (KISTI) and H University is operating a DM track in the form of Industry-University-Research Institute collaboration to train high-performance-computing-based DM professionals. In this paper, a series of courses to train students to work directly into DM practice in industry after graduation is reported. The operating cases of the DM track for two years since 2013 are presented by focusing on the progress in establishment, lecture and practice contents, evaluation of students, and course quality improvement. Overall, the track management, curriculum management, learning achievement of students have been successful. By expediting more active participation of the students in the track and providing more internship and job offers in the participating companies in addition to collaborative capstone design projects, the track can be expanded by fostering a nationwide training network.