• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.507-515
• /
• 1994

Fly ash and betonite samples were selected and characteristics of them were investigated. Fly ash was found to be similar to bentonite in particle size distribution but quite different in microstructure. The most special aspect of fly ash was high alkalinity of its solution. Distribution coefficients of Cs and Co on the samples were measured to survey the effects of mixing. Fly ash showed higher distribution coefficient of Co than that of Cs. Through various experiments, factors affecting the distribution coefficients of Co and Cs on mixture of bentonite and fly ash were identified. Comparison of the distribution coefficients of Cs on fly ash and bentonite mixture with those on sand and bentonite mixture suggests that fly ash would be useful as an efficient additive of backfill material if pertinent mixing ratio was chosen.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.99-102
• /
• 1999

In the study, the effect of the replacement content(20, 40, 60, 80%) and particle fineness and the chemical activator of the fly-ash on the flow and strength development of mortar was investigated. We found that the higher raito of the fly-ash replacement produced the lower the mortar strength and the higher fineness of the fly-ash yielded the higher strength. Also, we used Na2SO4 as activator of fly-ash to rise compressive strength mortar. The result as follows: the fly-ash mortar which stimulated by chemical activator, was higher strength development at early than the fly-ash mortar without chemical activator. But in the late age, the result indicated adversely.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.105-114
• /
• 2010

The objective of the paper is to experimentally investigate the compressive strength of the concrete incorporating fly ash. Ordinary Portland cement(OPC). Water to binder ratio(W/B) ranging from 30% to 60% and curing temperature ranging from $-10^{\circ}{\sim}65^{\circ}C$ were also adopted for experimental parameters. Fly ash was replaced by 30% of cement contents. According to the results, strength development of concrete contained with fly ash is lower than that of plain concrete in low temperature at early age and maturity. In high curing temperature, the concrete with fly ash has higher strength development than that of low temperature regardless of the elapse of age and maturity. Fly ash can have much effect on the strength development of concrete at the condition of mass concrete, hot weather concreting and the concrete products for the steam curing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.209-210
• /
• 2019

Current international concerns are the energy crisis due to climate change and depletion of fossil fuels due to global warming. Korea has a very high dependency on energy imports 93%. In Korea, 63% of the country is forested, and a power plant using wood biomass is being built in Korea. Biomass fly ash, a by-product of biomass energy generation, is now being discarded. There is little research to utilize discarded biomass fly ash. Therefore, this study aims to solve the environmental problems, develop new mixed materials, improve the quality and utilize the biomass fly ash, which is a by-product of the industrial waste. As a result of the experiment, the flowability decreased as the replacement ratio of biomass fly ash increased. As the replacement ratio of biomass fly ash decreased, the amount of air content.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.185-188
• /
• 2004

The effect of fly ash to prevent detrimental expansion due to alkali -silica reaction was investigated through the ASTM C 1260 method that is one of the most commonly used method because results can be obtained within about 16 days. Reactive aggregate used is a netamorphic rock and sedimentary rock. The replacement proportions of portland cement by fly ash were respectively 0, 5, 10, 15, 25 and 35 percent. Expansion of mortar bars due to alkali-silica reaction decreased with the increase of fly ash content. The results show that the expansion due to alkali-silica reaction is dramatically reduced in the presence of high volume fly ash. When the fly ash content examine from all angles (strength and a flow), the replacement proportions of fly ash is about $25\%$ in order to control on expansion.

• Computers and Concrete
• /
• v.25 no.1
• /
• pp.83-94
• /
• 2020

The use of fly ash in modern-day concrete technology aiming sustainable constructions is on rapid rise. Fly ash, a spinoff from coal calcined thermal power plants with pozzolanic properties is used for cement replacement in concrete. Fly ash concrete is cost effective, which modifies and improves the fresh and hardened properties of concrete and additionally addresses the disposal and storage issues of fly ash. Soft computing techniques have gained attention in the civil engineering field which addresses the drawbacks of classical experimental and computational methods of determining the concrete compressive strength with varying percentages of fly ash. In this study, models based on soft computing techniques employed for the prediction of the compressive strengths of fly ash concrete are collected from literature. They are classified in a categorical way of concrete strengths such as control concrete, high strength concrete, high performance concrete, self-compacting concrete, and other concretes pertaining to the soft computing techniques usage. The performance of models in terms of statistical measures such as mean square error, root mean square error, coefficient of correlation, etc. has shown that soft computing techniques have potential applications for predicting the fly ash concrete compressive strengths.

• Carbon letters
• /
• v.7 no.1
• /
• pp.27-33
• /
• 2006

Carbon-ceramic composites were fabricated by using fly ash and PANOX fibers as reinforcement. Fly ash, because of its small size particles e.g. submicron to micron level can be effectively dispersed along with fibrous reinforcements. Phenolic resin was used as carbon precursor. Both dry as well as wet methods were used for forming composites. The resulting composites were characterized for their microstructure, thermal and mechanical properties. The microstructure and mechanical properties of composites are found to be dependent on type of the fly ash, fibrous reinforcements as well as processing parameters. The addition of fly ash improves hardness and the fibers, which get co-carbonized on heat treatment, increase the flexural strength of the carbon-ceramic composites. Composites with dual reinforcement exhibit about 30-40% higher strength as compared to the composites made with single reinforcement, either with fly ash as filler or with chopped fibers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.334-339
• /
• 1995

To investigate the utilization of fly ash in agriculture, sorghum [Sorghum bicolor(L.) Moench] was used as the test crop. Soil was treated in pot experiments with anthracite and bituminous fly ash at 5 levels of 0, 6, 12, 18, and 24%, respectively. Growth status in terms of plant height and the number of nodes was improved in the order of bituminous treatment > anthracite treatment > control. The increment of fly ash had a positive effects on plant growth in both anthracite and bituminous treatment. The ratio of the senescent leaves to the all leaves during the maturing period was higher in fly ash treatments than in the control. As increasing the fly ash treatment, the ratio of senescent leaves was increased. Total yield was higher in the order of bituminous treatment > anthracite treatment > control. Grain yield also was higher in fly ash treatment than in the control. Bituminous fly ash treatments were more favourable in grain yield than anthracite. The increment of up to 12% fly ash to soil increased grain yield in both anthracite and bituminous. Application of bituminous fly ash could be recommended due to the fact that high pH of soil is favorable for growth of sorghum.

• Computers and Concrete
• /
• v.5 no.6
• /
• pp.559-572
• /
• 2008

The effects of fly ash and superplasticizer (SP) on workability of concrete are quite difficult to predict because they are dependent on other concrete ingredients. Because of high complexity of the relations between workability and concrete compositions, conventional regression analysis could be not sufficient to build an accurate model. In this study, a workability model has been built using artificial neural networks (ANN). In this model, the workability is a function of the content of all concrete ingredients, including cement, fly ash, blast furnace slag, water, superplasticizer, coarse aggregate, and fine aggregate. The effects of water/binder ratio (w/b), fly ash-binder ratio (fa/b), superplasticizer-binder ratio (SP/b), and water content on slump were explored by the trained ANN. This study led to the following conclusions: (1) ANN can build a more accurate workability model than polynomial regression. (2) Although the water content and SP/b were kept constant, a change in w/b and fa/b had a distinct effect on the workability properties. (3) An increasing content of fly ash decreased the workability, while raised the slump upper limit that can be obtained.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.124-132
• /
• 2019

The energy balance (EB) model of a primary side regulation (PSR) fly-back converter in the discontinuous conduction mode (DCM) is discussed in this paper. Based on this EB model, the stability of a PSR fly-back converter in the pulse skipping mode (PSM) is analyzed, and a self-adapting modulation factor control strategy is proposed. Theoretical analysis and simulation results show that by saving an optocoupler and correlative circuits, which are necessary in traditional PSM fly-back converters, the modulation factor tolerance controlled by this method is 1.26% on average, corresponding to the ideal value. Compared with traditional fly-back PSM controllers, the power saved in the sampler/comparator modules is 87% on average for a load range of $1{\Omega}$ to $1k{\Omega}$.