• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.539-547
• /
• 2019

Recently, the international community signed a climate change agreement to prevent global warming. Yet currently, the fossil fuels have been widely used in to supply building energy for cooling and heating. The Green Building certification (G-SEED), an energy efficiency rating for new or existing buildings requires that buildings meet certain conditions. Insulation is used as a building material to reduce the energy supply to buildings and to improve the thermal insulation, and it accounts for more than 90% of the total heat resistance provided by the building surface components that meet the energy-saving design standards of new buildings. In this investigation, a performance evaluation study was conducted through an experimental study by directly extracting the foam polystyrene insulation on-site during the remodeling of a building that was in the range of 22~38 years old. Through tests, it was found that the thermal conductivity of the extrusion method insulation (XPS) was reduced by 48% and the compressive strength of XPS decreased by 36% compared to KS M 3808, which is the initial quality standard. For bead method insulation (EPS) with a thickness of 50mm, the thermal conductivity, the compressive strength, and flexural failure load were similar to the initial quality standard. Therefore, in the calculation of the primary energy requirement per unit area per year, the performance of bead method insulation can be estimated simply by considering the thickness of the insulation, while a correction factor that considers its performance deterioration should be applied when extrusion method insulation is used.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.3-11
• /
• 2016

CM at Risk has been introduced in Korea to keep up with the global standards of construction management and provide a higher quality of cm service in line with a rapid change of the construction industry recently. However, it is widely considered that more time would required to settle down the system due to a lack of understanding towards CM at Risk, shortage of reliability and low capability to manage and undertake CM at Risk. Therefore, this research is analyzed problems of contract types, open book policies, and contract conditions of 33 numbers of projects undertaken by a bespoke domestic construction management firm in this research. Moreover, this research is suggested a method to establish an open book policy of CM at Risk aiming a better customers satisfaction through staff training, simplifying and improving a payment system, and a way to settle down an open book policy by improving a performance management system on site. It's expected that this research will contribute to a more competitive system with more dominating the market and a differentiation of the service so as clients to rely more on the CM at Risk.

• Composites Research
• /
• v.16 no.4
• /
• pp.66-73
• /
• 2003

The importance of understanding the response of structural composites to impact and CAI cannot be overstated to develop analytical models for impact damage and CAI strength predictions. This paper presents experimental findings observed from quasi-static lateral load tests, low velocity impact tests. CAI strength and open hole compressive strength tests using 3 mm thick composite plates($[45/-45/0/90]_{3s}$- IM7/8552). The conclusion is drawn that damage areas for both quasi-static lateral load and impact tests are similar and the curves of several drop weight impacts with varying energy levels(between 5.4 J and 18.7 J) follow the static curve well. In addition, at a given energy the peak force is in good agreement between the static and impact cases. It is identified that the failure behaviour of the specimens from the CAI strength tests was very similar to that observed in laminated plates with open holes under compression loading. The residual strengths art: in good agreement with the measured open hole compressive strengths. considering the impact damage site area, an equivalent hole. The experimental findings suggest that simple analytical models for the prediction of impact damage area and CAI strength can be developed on the basis of the failure mechanism observed from the experimental tests.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.251-259
• /
• 2005

In order to characterize the influence of the reaction-site density on the cathodic polarization property of LSCF, we chose the porosity of LSCF as a main controlling variable, which is supposed to be closely related with active sites for the cathode reaction. To control the porosity of cathodes, we changed the mixing ratio of fine and coarse LSCF powders. The porosity and pore perimeter of cathodes were quantitatively analyzed by image analysis. The electrochemical half cell test for the cathodic polarization was performed via 3-probe AC-impedance spectroscopy. According to the investigation, the reduction of oxygen at LSCF cathode was mainly controlled by following two rate determining steps; i) surface diffusion and/or ionic conduction of ionized oxygen through bulk LSCF phase, ii) charge transfer of oxygen ion at cathode/electrolyte interface. Moreover, the overall cathode polarization was diminished as the cathode porosity increased due to the increase of the active reaction sites in cathode layer.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.4
• /
• pp.478-484
• /
• 2018

Objective : Cerebrovascular disease (CVD) was the third most common cause of death in South Korea in 2014. Evidence from abroad suggests that comprehensive stroke centers play an important role in improving the mortality rate of stroke. However, surgical treatment for CVD is currently slightly neglected by national policy, and there is still regional imbalance in this regard. For this reason, we conducted a survey on the necessity of, and the requirements for, establishing regional comprehensive cerebrovascular surgery centers (CCVSCs). Methods : This investigation was performed using the questionnaire survey method. The questionnaire was consisted with two sections. The first concerned the respondent's opinion regarding the current status of demand and the regional imbalance of cerebrovascular surgery in South Korea. The second section asked about the requirements for establishing regional CCVSCs. We sent the questionnaire to 100 board members of the Korean Society of Cerebrovascular Surgeons. Results : Most experts agreed that cerebrovascular surgery patients were concentrated in large hospitals in the capital area, and 83.6% of respondents agreed that it was necessary to alleviate the regional imbalance of cerebrovascular surgery. With regards to personnel, over 90% of respondents answered that at least two neuro-vascular surgeons and two neuro-interventionists are necessary to establish a CCVSC. Regarding facilities, almost all respondents stated that each CCVSC would require a neuro-intensive care unit and hybrid operating room. The survey asked the respondents about 13 specific neurovascular surgical procedures and whether they were necessary for a regional CCVSC. In the questions about the necessity of cerebrovascular surgical equipment, all seven pieces of equipment were considered essential by all respondents. A further five pieces of equipment were considered necessary on site: computed tomographic angiography, magnetic resonance angiography, conventional angiography, surgical microscope, and surgical navigation. Our results may provide a basis for future policy regarding treatment of cerebrovascular disease, including surgery. Conclusion : Raising the comprehensiveness of treatment at a regional level would lower the national disease burden. Policies should be drafted regarding comprehensive treatment including surgery for cerebrovascular disease, and related support plans should be implemented.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.47-59
• /
• 2004

The temperature variation of concrete pavement at early-age significantly affects the initiation and propagation of its early-age cracks. This implies that the measurement and analysis of early age temperature trend are necessary to examine the causes of early age cracks in the concrete pavement. In this study, it is investigated how the early age temperature trend in concrete pavement affects the random crack initiation and behaviors of saw-cut joints using the actual construction site which is located at the KHC test road. During 72 hours after placing the concrete pavement, the ambient air temperature and temperatures at the top, middle, and bottom in concrete pavement were measured and the random crack initiation in concrete slabs and early age behaviors in the joints were surveyed. The investigation results indicate that the first random crack was initiated at one of the slabs placed in the early morning which have higher temperature changes during early 72 hours. The movement of slab was influenced by the early-age crack in the joint. It suggested that the different occurrence time of the cracks in the joint had an influence on the behavior of the cracks. Besides, the slab constructed In the morning had higher possibility of crack initiation than that in the afternoon. The rarely occurred cracks had bigger gap than other cracks.

• Korean Journal of Environmental Biology
• /
• v.24 no.4
• /
• pp.359-367
• /
• 2006

The vascular plants of this site were identified as 641 taxa through field investigation; 101 families, 340 genera, 547 species, 80 varieties, 12 forms, 1 subspecies and 1 hybrid. Based on the Rare plants of the Forest Service and Korea Forest Research Institute, 9 taxa were listed except implanted species; Loranthus tanakae, Aristolochia manshuriensis, Aristolochia contorta, Viola albida, Cypripedium macranthum, Schpolia japonioa, Acanthopanax chiisanensis, Rhododendron micranthum. Based on the Korean endemic plants, 18 taxa were listed; Salix purpurea var, japonica, Asarum sieboldii var. mandshuricum for. misnadrum, Persicaria lapathifolia for. alba, Pseudostellaria sylvatica, Aconitum pseudolaeve var. erectum, Corydalis maculata, Corydazis albipetala, Corydalis grandicazyx, Cardamine amaraeiormis, Chrysosplenium barbatum, Filipendula glaberrima, Lespedeza x tomentella, Acanthopanax chiisanensis, Melampyrum setaceum var. nakaianum, Weigela subsessilis, Adenophora triphylla var. hirsute, Cirsium setidens, Saussurea pseudogracilis. Specific plant species by floral region were total 81 taxa (12.6%); Prunus yedoensis in class V, 13 taxa (Thuja orientalis, Cimicifuga heracleiiolia, Sedum middendorffianutn, Rhododendron micranthum, etc.) in class IV, 17 taxa (Equisetum palustre, Aceriphyllum rossii, Angelica gigas, Cirsium setidens, etc.) in class III, 15 taxa (Heloniopsis orientalis, Lychnis cognata, Saxifraga oblongifolia, Viola orientalis, etc.) in class II, 35 taxa (Hosta capitata, Cimicifuga simplex, Chrysosplenium flagelliferum, Campanula punctata, etc.) in class I. So, the naturalized plants were listed 53 taxa and the naturalization index was 8.2%, urbanization index was 20.7%.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2431-2440
• /
• 2015

Background: Registry data from four major public hospitals indicate trends in clinical care and survival from colorectal cancer over three decades, from 1980 to 2010. Materials and Methods: Kaplan-Meier productlimit estimates and Cox proportional hazards models were used to investigate disease-specific survival and multiple logistic regression analyses to explore first-round treatment trends. Results: Five-year survivals increased from 48% for 1980-1986 to 63% for 2005-2010 diagnoses. Survival increases applied to each ACPS stage (Australian Clinico-Pathological Stage), and particularly stage C (an increase from 38% to 68%). Risk of death from colorectal cancer halved (hazards ratio: 0.50 (0.45, 0.56)) over the study period after adjusting for age, sex, stage, differentiation, primary sub-site, health administrative region, and measures of socioeconomic status and geographic remoteness. Decreases in stage were not observed. Survivals did not vary by sex or place of residence, suggesting reasonable equity in service access and outcomes. Of staged cases, 91% were treated surgically with lower surgical rates for older ages and more advanced stage. Proportions of surgical cases having adjuvant therapy during primary courses of treatment increased for all stages and were highest for stage C (an increase from 5% in 1980-1986 to 63% for 2005-2010). Radiotherapy was more common for rectal than colonic cases. Proportions of rectal cases receiving radiotherapy increased, particularly for stage C where the increase was from 8% in 1980-1986 to 60% in 2005-2010. The percentage of stage C colorectal cases less than 70 years of age having systemic therapy as part of their first treatment round increased from 3% in 1980-1986 to 81% by 1995-2010. Based on survey data on uptake of adjuvant therapy among those offered this care, it is likely that all these younger patients were offered systemic treatment. Conclusions: We conclude that pronounced increases in survivals from colorectal cancer have occurred at major public hospitals in South Australia due to increases in stage-specific survivals. Use of adjuvant therapies has increased and the patterns of change accord with clinical guideline recommendations. Reasons for sub-optimal use of radiotherapy for rectal cases warrant further investigation, including the potential for limited rural access to impede uptake of treatments at metropolitan-based radiotherapy centres.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.284-287
• /
• 2000

Recently, developing medical devices have a tendency becoming the module for satisfying user's mutual complex needs. Because the most effective method for the observation of patients condition a diagnosis and a treatment is collecting data from various devices and controling operation following it. Module tendency is more popular due to manage easily totally many individual systems. This study implemented communication protocol to control by one control system connecting modular medical devices. Implemented system consist of one master module controlling all module and managing communication and many Slave modules. Communication between each modules introduced SPI(Serial Peripheral Interface) among many synchronous serial communication methods for the exact transmission and receipt of data. All communication executes by packet format. This can detect error. And, this protocol introduced PNP(Plug And Play) function that auto-detect connecting or removing module during running. This protocol exactly transmitted and received in faster speed more than 1Mbps. And in practical application to the ventilator this confirmed to give and take real-time data. And various functions by th central control system is implemented in this protocol.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.411-422
• /
• 2015

This paper presents an overview of the geological environment investigation and underwater acoustic measurements for the purpose of "Study on the Relationship between the Geological Environment and Acoustic Propagation in Shallow Water", which are jointly carried out by KIOST (Korea Institute of Ocean Science & Technology) and Hanyang University in the western shallow water off the Taean peninsula in the Yellow Sea in April-May 2013. The experimental site was made up of various sediment types and bedforms due to the strong tidal currents and coastal geomorphological characteristics. The geological characteristics of the study area were intensively investigated using multi-beam echo sounder, sub-bottom profiler, sparker system and grab sampler. Acoustic measurements with a wide range of research topics in a frequency range of 20~16,000 Hz: 1) low frequency sound propagation, 2) mid-frequency bottom loss, 3) spatial coherence analysis of ambient noise, and 4) mid- frequency bottom backscattering were performed using low- and mid-frequency sound sources and vertical line array. This paper summarizes the topics that motivated the experiment, methodologies of the acoustic measurements, and acoustic data analysis based on the measured geological characteristics, and describes summary results of the geological, meteorological, and oceanographic conditions found during the experiments.