• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.273-273
• /
• 2002

Masan barber was situated in S.Korean southern central coast. And it is contributing greatly in S.korea's economy development to international trading port of Heaven's blessing that possess natural, geographical situation. Also, because there are Masan free tax area and chanwon heavy industrial complex, sachon air industrial complex etc. on back, it is important permanency in our country. Specially, because inland transport routes such as southern highway, Guma highway and national road system are developed well, the importance is very high. Masan harbor 1899.05.01 be that opened, the 1st and 2nd (central pier) was build 1938∼1944 year, and the 3rd pier was 1973∼1978 year. the 4th pier was 1974∼1983 year, 5th pier was 1984∼1988, 6th pier (west pier) was 1985∼1992 year. it was developed over 100 years. But, it did great many harbor and bay development of last 100 yens but research about coastline change and seashore reclamation is insufficient. Therefore, this research executed research about coastline change of Masan bay of last 100 years, In this study, we analyzed aerial photographs and tide data for the past 100 years using digital aerial photo analysis and GIS techniques for each 3-year interval. We abstracted beach DEM (digital elevation model) and ortho aerial photographs, and conducted a space analysis. As a result, we were able to identify changes in the area As a result, we drew 10 years cycle coastline change of Masan bay. and we can detect bay coastal line change and calculate refill rate.

• Journal of Climate Change Research
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2010

Recently the number of motorcycles has increased in urban area, and it is believed that motorcycle is one of the air pollution and greenhouse gas emission sources. But the greenhouse gas emission from motorcycle has been high uncertainty due investigation of a lack of activity data and emission factors in Korea. So in this study, the greenhouse gas emission from motorcycle is estimated by considering the population of moped and VKT(vehicle kilometers travelled) of motorcycle by recent other studies. And the emissions by IPCC Tier 2 and Tier 3 methodology are calculated and compared. As the results, the nationwide $CO_2$ equivalent emissions from motorcycles by Tier 2 and Tier 3 method are calculated as 2,758 kton/yr and 2,739 kton/yr in 2008. The contribution ratio of this emission is estimated as 2.7% in on-road transport sector.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.57-64
• /
• 2019

A man-made slope has been increased due to the construction of road. This slope lies at risk of rock falling, induced mostly by heavy rainfall. The MOLIT (Ministry of Land, Infrastructure and Transport) recommends the specific dimension of rockfall protection fence (post, wire-rope, and mesh) which should resist 48~61 kJ. However, the energy absorption capacity of each component of rockfall protection fence is not clearly presented. Hence, this study made an effort to compute the energy absorption capacity of each component in analytical and numerical method, and compared with each other.

• Journal of Korea Planning Association
• /
• v.54 no.2
• /
• pp.93-108
• /
• 2019

This study examines the relationship between three-dimensional urban built environment and urban surface temperature using LANDSAT 8 satellite image data in Seoul city. The image was divided into 600m×600m grid units as an unit of analysis. Due to the high level of spatial dependency in surface temperature, this study uses spatial statistics to take into account spatial auto-correlation. The spatial error model shows the best goodness of fit. The analysis results show that the three-dimensional built environment and transport environment as well as natural environment have statistically significant associations with surface temperature. First, natural environment variables such as green space, streams and river, and average elevation show statistically significant negative association with surface temperature. Second, the building area shows a positive association with surface temperature. In addition, while sky view factor (SVF) has a positive association with surface temperature, surface roughness (SR) shows a negative association with it. Third, transportation related variables such as road density, railway density, and traffic volume show positive associations with surface temperature. Moreover, this study finds that SVF and SR have different effects on surface temperature in regard to the levels of total floor areas in built environment. The results indicate that interactions between floor area ratio (FAR) and three-dimensional built environmental variables such as SVF and SR should be considered to reduce urban surface temperature.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.179-222
• /
• 2005

Studies prosecuted on relics in those 17 bronze workshops that have been thus far excavated show that these workshops may be roughly classified into a royal workshop, a state-operated workshop and a private workshop depending upon by whom they were operated. Workshops in the Gyeongju area developed from a small royal handicraft manufacturing to a large state-operated handicraft manufacturing scale, and then later on gradually changed to a private handicraft manufacturing industry. The royal bronze workshops were operated in a small scale, as shown from the relics excavated at Wolseong(月城), Imhaejeonji(Anapji:雁鴨池) and their neighborhood places around Hwangnam_dong(皇南洞). The state-operated bronze workshops are concentrated upon one point around Dongcheon-dong(東川洞), Gyeongju city. On the other hand, in the state-operated workshop stage, a broad street was built by a workshop, which is presumed to aim to thoroughly transport materials needed for the workshop. And the point that wastes from bronze workshops were used for road repairs indicates that road repair works were carried at the bronze workshops near the road. The private workshop as a new type of workshop was operated by the aristocracy. For that purpose, craftsmen belonging to state-operated workshops or individual artisans were absorbed into the aristocracy-operated workshops. These types of workshops were pervaded throughout the city. When private workshops came to emerge in the houses of the aristocracy, the operating subjects of workshops began to change from state-operated to private workshops. Temple workshops were located at a Buddhist temple within the Court and directly produced things needed for the court, including bronze foundries. As aforementioned, through the presence of bronze workshops operated in the Silla Court, we can identify the relationships between their technical level and trading areas and among their origin, supply and demand sources, along with phases of social life in those days.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.727-736
• /
• 2021

Road tunnel lengths are increasing. Some 1,300 tunnels with 1,102 km in length had been increased till 2019 from 2010. There are 64 tunnels over 3,000 m in length, with their total length adding up to 276.7 km. Safety facilities in the event of a tunnel fire are critical so as to prevent large-scale casualties. Standards for installing disaster prevention facilities are being proposed based on the guidelines of the Ministry of Land, Infrastructure and Transport, but they may be limited to deep underground tunnels. This study was undertaken to provide guidelines for the spacing of evacuation connection passages and the widths of evacuation connection doors. Evacuation with various spacing and widths was simulated in regards to evacuation time, which is the measure of safety, using the evacuation analysis simulation software EXODUS Ver.6.3 and the fire/smoke analysis software SMARTFIRE Ver.4.1. Evacuation connection gates with widths of 0.9 m and 1.2 m, and spacings of 150 m to 250 m, were set to every 20 m. In addition, longitudinal slopes of 6 % and 0 % were considered. It was determined to be safe when the evacuation completion time was shorter than the delay diffusion time. According to the simulation results, all occupants could complete evacuation before smoke spread regardless of the width of the evacuation connection door when the longitudinal slope was 6 % and the interval of evacuation connection passage was 150 m. When the evacuation connection passage spacing was 200 m and the evacuation connection gate width was 1.2 m, all occupants could evacuate when the longitudinal slope was 0 %. Due to difference in evacuation speed according to the longitudinal slope, the evacuation time with a 6 % slope was 114 seconds shorter (with the 190 m connection passage) than with a 0 % slope. A shorter spacing of evacuation connection passages may reduce the evacuation time, but this is difficult to implement in practice because of economic and structural limitations. If the width of the evacuation junction is 1.2 m, occupants could evacuate faster than with a 0.9 m width. When the width of a connection door is 1.2 m with appropriate connection passage spacing, it might provide a means to increase economic efficiency and resolve structural limitations while securing evacuation safety.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.27-31
• /
• 2006

GNSS Services and Applications are today in permanent evolution in all the market sectors. This evolution comprises: ${\bullet}$ New constellations and systems, being GALILEO probably the most relevant example, but not the only one, as other regions of the world also dwell into developing their own elements (e.g. the Chinese Beidou system). ${\bullet}$ Modernisation of existing systems, as is the case of GPS and GLONASS ${\bullet}$ New Augmentation services, WAAS, EGNOS, MSAS, GRAS, GAGAN, and many initiatives from other regions of the world ${\bullet}$ Safety of Life services based on the provision of integrity and reliability of the navigation solutions through SBAS and GBAS systems, for aeronautical or maritime applications ${\bullet}$ New Professional applications, based on the unprecedented accuracies and integrity of the positioning and timing solutions of the new navigation systems with examples in science (geodesy, geophysics), Civil engineering (surveying, construction works), Transportation (fleet management, road tolling) and many others. ${\bullet}$ New Mass-market applications based on cheap and simple GNSS receivers providing accurate (meterlevel) solutions for daily personal navigation and information needs. Being on top of this evolving market requires an active participation on the key elements that drive the GNSS development. Early access to the new GNSS signals and services and appropriate testing facilities are critical to be able to reach a good market position in time before the next evolution, and this is usually accessible only to the large system developers as the US, Europe or Japan. Jumping into this league of GNSS developers requires a large investment and a significant development of technology, which may not be at range for all regions of the world. Bearing in mind this situation, MAGIC appears as a concept initiated by a small region within Europe with the purpose of fostering and supporting the development of advanced applications for the new services that can be enabled by the advent of SBAS systems and GALILEO. MAGIC is a low cost platform based on the application of technology developed within the EGNOS project (the SBAS system in Europe), which encompasses the capacity of providing real time EGNOS and, in the near future, GALILEO-like integrity services. MAGIC is designed to be a testing platform for safety of life and liability critical applications, as well as a provider of operational services for the transport or professional sectors in its region of application. This paper will present in detail the MAGIC concept, the status of development of the system within the Madrid region in Spain, the results of the first on-field demonstrations and the immediate plans for deployment and expansion into a complete SBAS+GALILEO regional augmentation system.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.77-89
• /
• 2012

Walking is the most basic personal mobility and its importance and concern is ever increasing with the highlighting of a new paradigm, such as transit oriented development, sustainable development and revitalization of green transport. The existing analytical research on pedestrian network is using a pedestrian's moving distance to a destination and integration in space syntax theory as its representative accessibility factors. However, the uniplanar network moving distance fails to reflect topographic characteristics, so the moving distance could show a similar result value in case of the regions for analysis that have a similar network structure to each other. Accordingly, the aim of this study is to suggest a new analytical methodology on pedestrian network accessibility in consideration of the grade in pedestrian sections and a pedestrian's size. this study, in its analysis of a uniplanar pedestrian network moving distance, analyzed the pedestrian network moving distance in consideration of the grade in pedestrian sections, and even the pedestrian network moving distance in consideration of a pedestrian's size, and suggested the methodology on pedestrian network accessibility analysis in consideration of a more substantive pedestrian's characteristics. It is hoped that the methodology used by this study will be used as the methodology on pedestrian network analysis which can reflect topographic characteristics in the pedestrian network analysis, and take a more substantive pedestrian's movement into account.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8265-8270
• /
• 2014

Background: Smoking tobacco is considered as a leading cause of preventable death, mostly in developing countries like India. One of the primary goals of international tobacco control is to educate smokers about the risks associated with tobacco consumption. Tobacco warning labels (TWLs) on cigarette packages are one of the most common statutory means to communicate health risks of smoking to smokers, with the hope that once educated, they will be more likely to quit the habit. Materials and Methods: The present survey was conducted to assess the effectiveness of TWLs in communicating health risks of tobacco usage among 263 adult smokers working as bus drivers in Karnataka State Road Transport Corporation (KSRTC), Mangalore, India. Information was collected on demographic details, exposure and response to health warnings on tobacco products, intention to quit and nicotine dependency. Results: The majority (79.5%) of the respondents revealed negative intentions towards quitting smoking. Nearly half of the participants had a 'low' nicotine dependency (47.5%) and 98.1% of the respondents had often noticed warning labels on tobacco packages. These health warnings made 71.5% of the respondents think about quitting smoking. Respondents who noticed advertisement or pictures about dangers of smoking had better knowledge, with respect to lung cancer and impotence as a consequence of tobacco. A higher exposure to warning labels was significantly associated with lower nicotine dependency levels of smokers among the present study population. A significantly higher number of respondents who noticed advertisement or pictures about the dangers of smoking thought about the risks of smoking and were more inclined to think about quitting smoking. As exposure increased, an increase in the knowledge and response of participants was also observed. Conclusions: Exposure to tobacco warning labels helps to educate smokers about health risks of tobacco smoking. It may be possible to promote oral health among bus drivers by developing strategies to educate them about these risk factors.