• 대한화학회지
• /
• 제59권2호
• /
• pp.142-147
• /
• 2015

Two new chitosan derivatives, polyamine grafted chitosan copolymers have been synthesized for corrosion protection of carbon steel in acidic medium. First, methyl acrylate graft chitosan copolymer (CS-MAA) was prepared by the reaction of chitosan (CS) and methyl acrylate (MAA) via the Michael addition reaction. Then, CS-MAA was reacted with ethylene diamine (EN) and triethylene tetramine (TN) respectively to synthesize ethylene diamine grafted chitosan copolymer (CS-MAA-EN) and triethylene tetramine grafted chitosan copolymer (CS-MAA-TN), and the structures were characterized by Fourier-transform infrared spectroscopy (FT-IR). At last, the corrosion inhibition activities on Q235 carbon steel were investigated by using gravimetric measurements, metallographic microscope, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The compounds CS-MAA-EN and CS-MAA-TN show an appreciable corrosion inhibition property against corrosion of Q235 carbon steel in 5% HCl solution at $25^{\circ}C$. It has been observed that CS-MAA-EN shows greater corrosion inhibition efficiency than CS-MAA-TN. The inhibition efficiency of CS-MAA-EN was close to 90% when the mass fraction concentration was 0.2%~0.3%; the inhibition efficiency of CS-MAA-TN was close to 85% when the mass fraction concentration was 0.02%. The present work provided very promising results in the preparation of green corrosion inhibitors.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.228-241
• /
• 2021

본 연구는 자율협력주행차량의 협력 인프라 중 하나인 도로표지판을 대상으로 LiDAR의 검지성능 변화를 알아보았다. 이를 위해서 색깔과 재질이 다른 도로표지판을 제작하여 실제도로 환경에서 강우량을 통제한 테스트를 수행하였다. 성능지표는 NPC와 Intensity로 선정하였고, 집단간의 비교는 T-Test를 활용하였다. 연구결과, 모든 재질에서 강수량이 증가할수록 LiDAR의 성능지표가 감소되는 결과가 관측되었다. 재귀반사지는 강수량 증가에 따른 성능지표 감소가 페인트 도색에 비해선 작았지만, 이 역시 40mm이상의 강수량에서는 데이터의 관측이 되지 않을 정도로 성능이 저하되었다. 검은색 페인트는 맑은 날에도 다른 색들에 비하여 성능지표가 낮았으며 특히, 백색의 재귀반사지는 성능지표가 강수량 증가에 가장 민감하게 저하되었다. 이러한 성능검증 결과는 향후 센서의 시인성을 제고하는 도로시설물 제작에 활용될 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.192-202
• /
• 2021

과거 안전시설 설치 기준 및 도로안전지수 등에 관한 다양한 연구가 수행되어왔다. 하지만 연구결과를 사용하기에 많은 조사항목과 사용하기 어려운 변수를 사용하는 등 현장에 적용하기에는 한계가 있다. 따라서 본 연구에서는 연구결과의 적용 가능성을 고려한 도로안전 판단지표를 개발하고 안전시설의 설치 기준을 마련하고자 하였다. 유관시스템의 데이터 항목을 검토하였으며 이미 활용 중인 변수의 사용을 고려하였다. 상관분석과 요인분석을 통해 교통요인, 도로요인, 사고요인을 반영한 도로안전 판단지표를 개발하였으며, 군집분석을 통해 안전시설의 설치판단 기준 점수를 도출하였다. 분석결과 단일로에 비해 교차로에서 설치판단 기준 점수가 더 낮게 분석되었으며 교차로의 도로 위험도가 더 큰 것으로 분석되었다.

• 한국ITS학회 논문지
• /
• 제22권2호
• /
• pp.29-43
• /
• 2023

재난 및 재해 상황시 이동관리전략을 신속히 마련하기 위해서는 특정 도로구간을 통행하는 교통류의 특징과 도로의 위상학적 구조 등을 사전에 파악해야 할 필요성이 있다. 이는 도로관리자가 미시적 도로단위별로 취약성을 평가한 후 재난·재해 상황에 대비한 적절한 모니터링과 관리방안을 설정하는데 중요한 근거가 될 수 있기 때문이다. 따라서 본 연구에서는 도시부 도로링크별 취약성 평가를 위하여 공간밀도, 시간점유율, 네트워크 매개중심성 지표를 제시하였으며, 거리 및 밀도기반 클러스터링 분석을 통하여 각 링크그룹별로 가지고 있는 시공간 및 위상학적 취약성을 정의하였다. 본 연구를 통해 제시된 결과는 도로 링크를 집단별로 특성화하여 취약성을 관리하는 것에 활용될 수 있으며, 재난·재해 시 우선 통제지점 선정 및 최적경로 제시를 위한 기초자료로도 활용 가능할 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.38-47
• /
• 2014

국토교통부에서는 전국에 설치된 약 16만개의 도로표지를 효율적으로 관리하기 위해 2005년부터 도로표지관리시스템(RSMS)을 운영하고 있다. 이후 RSMS가 선형데이터 기반으로 고도화됨으로써 GIS 분석이 가능해졌다. 또한 도로표지 관련 지침에는 고속도로 및 지방부 국도에 설치되는 방향표지 안내지명에 대한 기준이 제시되어 있으나, 도시부 도로의 경우 참조할 만한 안내지명이 없어 도시별로 공통된 안내지명에 대한 일관된 선정이 어려운 실정이다. 이러한 환경 변화와 문제점 인식을 토대로 본 연구에서는 창원시 RSMS의 방향표지 자료를 토대로 원 근거리 지명이 서로 다른 공간적 영향권을 가지고 있음을 가설 검정과 실제 도로표지 데이터를 사례로 제시하였으며, 사례 분석을 통해 도시별로 공통된 안내지명에 대한 공간적 영향권을 분석하는 절차를 제시하였다. GIS 분석에 근거한 시도를 통해 향후 신규 도로표지 설계시 설치지점 및 지역적 특수성을 고려하여 안내지명을 효과적으로 선정하는데 활용될 수 있을 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.48-56
• /
• 2014

유류소모량 산정 모형 개발을 위해서는 차종, 도로의 경사, 포장상태, 포장종류 등 다양한 변수들을 고려해야 하지만 현재 사용하고 있는 국토교통부의 투자평가지침에도 차종으로만 구분이 되어 있을 뿐 다양한 요인들을 고려하지 못하고 있는 실정이다. 본 연구에서는 도로의 경사도가 승용차의 유류소모량에 미치는 영향을 분석하기 위해 실제 주행실험을 통해 얻은 데이터를 기반으로 유류소모량 산정 모형을 개발하고 적용성을 검증하는 것을 목적으로 한다. 경사도에 따른 유류소모량 모형 개발을 위해 GPS 장비와 연비측정장비를 이용하여 실제 주행실험을 통해 유류소모량을 초(sec)단위로 측정하였다. 평지(${\pm}0{\sim}2%$), 오르막(+2~5%), 내리막(-2~5%)의 세 가지 경사도로 구분하였으며 차량의 속도와 유류소모량을 변수로 하는 회귀모형을 이용하여 모형을 개발하였다. 승용차의 유류소모량은 내리막, 평지, 오르막 순으로 커지는 것을 확인할 수 있었다.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.233-248
• /
• 2012

The national emission from energy sector accounted for 84.7% of all domestic emissions in 2007. Of the energy-use emissions, the emission from mobile source as one of key categories accounted for 19.4% and further the road transport emission occupied the most dominant portion in the category. The road transport emissions can be estimated on the basis of either the fuel consumed (Tier 1) or the distance travelled by the vehicle types and road types (higher Tiers). The latter approach must be suitable for simultaneously estimating $CO_2$, $CH_4$, and $N_2O$ emissions in local administrative districts. The objective of this study was to estimate 31 municipal GHG emissions from road transportation in Gyeonggi Province, Korea. In 2008, the municipalities were consisted of 2,014 towns expressed as Dong and Ri, the smallest administrative district unit. Since mobile sources are moving across other city and province borders, the emission estimated by fuel sold is in fact impossible to ensure consistency between neighbouring cities and provinces. On the other hand, the emission estimated by distance travelled is also impossible to acquire key activity data such as traffic volume, vehicle type and model, and road type in small towns. To solve the problem, we applied a hierarchical cluster analysis to separate town-by-town road patterns (clusters) based on a priori activity information including traffic volume, population, area, and branch road length obtained from small 151 towns. After identifying 10 road patterns, a rule building expert system was developed by visual basic application (VBA) to assort various unknown road patterns into one of 10 known patterns. The expert system was self-verified with original reference information and then objects in each homogeneous pattern were used to regress traffic volume based on the variables of population, area, and branch road length. The program was then applied to assign all the unknown towns into a known pattern and to automatically estimate traffic volumes by regression equations for each town. Further VKT (vehicle kilometer travelled) for each vehicle type in each town was calculated to be mapped by GIS (geological information system) and road transport emission on the corresponding road section was estimated by multiplying emission factors for each vehicle type. Finally all emissions from local branch roads in Gyeonggi Province could be estimated by summing up emissions from 1,902 towns where road information was registered. As a result of the study, the GHG average emission rate by the branch road transport was 6,101 kilotons of $CO_2$ equivalent per year (kt-$CO_2$ Eq/yr) and the total emissions from both main and branch roads was 24,152 kt-$CO_2$ Eq/yr in Gyeonggi Province. The ratio of branch roads emission to the total was 0.28 in 2008.

• 한국시스템다이내믹스연구
• /
• 제12권1호
• /
• pp.75-87
• /
• 2011

Congestion problems can be approached from the viewpoint of system dynamics theory. The relationship between road capacity and congestion can be explained by the 'relative control' archetype among four system archetypes suggested by Wolstenholme. There is a balancing feedback loop between road capacity and road congestion. However, there is another balancing loop between road congestion and car traffic volume, which keeps disrupting the equilibrium of the former loop. A system dynamics model, which is based on a partial adjustment model of induced traffic in the literature, is built to simulate three road building scenarios: 'Expanding investment', 'Balancing investment' and 'Frozen road investment' scenarios. The 'Expanding investment' scenario manages to drop congestion levels by 9% over 30 years, however, causing much higher emissions of $CO_2$ than other scenarios. The trade-off relationship between congestion levels and environmental costs must be taken into consideration for road investment policies.

• 교통기술과정책
• /
• 제7권5호
• /
• pp.81-89
• /
• 2010