• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.153-162
• /
• 2017

PURPOSES : This study was conducted to analyze the effects arising from extending the duration of nighttime road construction on improving road quality and durability. METHODS : Most previous studies estimating the social cost of various construction conditions did not consider road pavement cooling time as a factor in improving road pavement quality. This study investigated the feasibility of achieving higher road quality and durability by extending the duration of nighttime road construction time extension. For this investigation, the effects of such an extension on traffic conditions were analyzed based on micro-simulation studies and scenario-based cost-benefit analyses, using factors including traffic volume, delay, construction cost, and road pavement cooling time. RESULTS : The results of the traffic simulation studies and cost-benefit analyses indicate that the current road construction method that emphasizes completing nighttime road construction by 6 a.m. reduces pavement life while causing relatively little traffic delay. If the night construction time is instead extended to 2 p.m., road pavement lifetime is increased, reducing road re-construction cost. These savings are greater than the cost of congestion arising from extending the duration of nighttime construction. CONCLUSIONS : The current nighttime construction durations need to be extended in order to efficiently manage roads and reduce road management costs.

• Acta Via Serica
• /
• 제3권2호
• /
• pp.73-90
• /
• 2018

The Silk Road tied the globe together for the first time by producing an early globalization phenomenon. Some consider that the ancient Silk Road disintegrated around the $18^{th}$ century CE due to the fall of the Muslim empires and the kingdoms between Asia and Europe. However, the maritime trade among East Asia and the Spanish dominion on the American continent reactivated the ancient Silk Road on some levels, and maintained trade dynamics until the $19^{th}$ century. This was possible because of Mexican silver and trade spots. Notwithstanding its historical background, Mexico seems so far away from the new Silk Road, or the Belt and Road Initiative in the $21^{st}$ century. Thus, this paper analyzes Mexico's historic and current role concerning the Silk Road. First, I conceptualize and compare the ancient Silk Road and Belt and Road Initiative through the lens of complex interdependence theory. I propose that, unlike the ancient Silk Road, the Belt and Road Initiative is a case of an induced complex interdependence. Second, I study the Manila Galleons' dynamics in order to trace the ancient ties with the Silk Road. I emphasize Mexican silver's contribution to East Asian economies and the importance of Mexico's role in the East Asia-Spanish trade. Consequently, I analyze Mexico's position in the Belt and Road Initiative. Finally, I present some concluding remarks about Mexico's role in the Silk Road.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.115-120
• /
• 2006

A Korean Road Roughness Classification(KRC) method is proposed. Using a dynamic road profiling device equipped with the Accelerometer Established Inertial Profiling Reference(AEIPR) method, road profile measurement is performed on various types of public paved roads in Korea. The road profiling data are processed to classify the characteristics of Korean road roughness. The resultant Korean road roughness classification(KRC) is shown different characteristics compared to the road classification proposed by ISO, MIRA, and Wong. The proposed KRC is composed of 8 classes(A-H, very good-poor) based on the power spectral density and is in good agreements with the characteristics of Korean paved road roughness and can be used well in vehicle ride comfort simulation using domestic road profile.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.519-522
• /
• 2004

The purpose of this research is to design a road using digital photogrammatry method to generate DEM(digital elevation model) and digital ortho image based on GSIS which was applied to the road simulation. The example study area was the suburbs of Jeju city. To this study, 1/5,000 digital map and GSIS technique were used for optimum road design of the island based on Arc View software. Using this software we can Set an overlay map by combination of hill shade map, slope map, aspect map, and building buffer map. Based on this overlap map, we designed the best road line and along this line we performed three dimensional road simulation using Microstation CAD and Inroads road design programs. From the results, we found that the DEM and digital ortho image acquired from stereoairphoto using digital photogrammatry was satisfied for choosing the best roadline and the developed three dimensional road simulation technique using GSIS technique was very useful to estimate the reasonable road design before the real road construction works.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.93-101
• /
• 2013

PURPOSES : This study is to investigate the relationship of socioeconomic characteristics and road network structure with traffic growth patterns. The findings is to be used to tweak traffic forecast provided by traditional four step process using relevant socioeconomic and road network data. METHODS: Comprehensive statistical analysis is used to identify key explanatory variables using historical observations on traffic forecast, actual traffic counts and surrounding environments. Based on statistical results, a multiple regression model is developed to predict the effects of socioeconomic and road network attributes on traffic growth patterns. The validation of the proposed model is also performed using a different set of historical data. RESULTS : The statistical analysis results indicate that several socioeconomic characteristics and road network structure cleary affect the tendency of over- and under-estimation of road traffics. Among them, land use is a key factor which is revealed by a factor that traffic forecast for urban road tends to be under-estimated while rural road traffic prediction is generally over-estimated. The model application suggests that tweaking the traffic forecast using the proposed model can reduce the discrepancies between the predicted and actual traffic counts from 30.4% to 21.9%. CONCLUSIONS : Prediction of road traffic growth patterns based on surrounding socioeconomic and road network attributes can help develop the optimal strategy of road construction plan by enhancing reliability of traffic forecast as well as tendency of traffic growth.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.137-149
• /
• 2013

PURPOSES: This study is to suggest the Contribution of Road Capital in Industry and Optimal Level of Road Investment in South Korea METHODS: Based on the literature review, This research is empirically estimated using disaggregate and disaggregated data composed of 10-sectors covering the entire korea economy for the period 1970~2000. The relevant policy questions addressed in this report are : cost reduction and Scale elasticities of road, effect of road capital stock on demand for labor, capital and materials, marginal effect of road, industry TFP growth decomposition, Net Social Rates of Returns, optimal of road capital. RESULTS : The marginal benefits of the road capital at the industry level were calculated using the estimated cost elasticities. Demand for the road capital services varies across industries as do the marginal effects. The marginal benefits are positive for the principal industries. This suggests that for these industries the existing stock of road capital may be under supplied. CONCLUSIONS: This results emerges is that the ratio of the optimum to actual road capital, measured by road, was high at beginning of the period 1970s and declined 1990s. There appears to be evidence of under-investment in road capital. That is continuous and premeditated investment for road which lead to saving time and finance.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.631-636
• /
• 2009

This study has its intention to investigate the water quality of non-point source which is runoff from roads. We have classified and selected twelve sites as city road, industrial road, national road and mountain road by considering their traffic volume and surroundings. Water quality was analyzed based on BOD, COD, SS, T-N and T-P and the concentrations were measured by sampling after rainfall with the interval of 10 minutes, 20 minutes, and 30 minutes. BOD was the highest in city road with 57.6 mg/L and the lowest in mountain road with 45.0 mg/L. For COD, the highest concentration in industrial road was 146.5 mg/L and the lowest was in mountain road with 98.0 mg/L. The run off concentration of SS was up to maximum 630.0 mg/L (average 280.4 mg/L) which was remarkable compared to other types of road. It showed its lowest concentration in national road with 76.0 mg/L. T-N and T-P were the highest in industrial road and the lowest in mountain road. We found out that the runoff concentration was high with large amount of traffic volume and it seemed to be high in city road and industrial road where they were largely affected by their surroundings. Relatively, national road and mountain road seemed to show low concentration as they have less traffic volume and less affected by their surroundings.

• 대기
• /
• 제31권5호
• /
• pp.525-537
• /
• 2021

Black ices on road surfaces in winter tend to cause severe and terrible accidents. It is very difficult to detect black ice events in advance due to their localities as well as sensitivities to surface and upper meteorological variables. This study develops a methodology to detect the road sections vulnerable to black ice with the use of road surface temperature data obtained from a mobile road weather observation vehicle. The 7 experiments were conducted on the route from Nam-Wonju IC to Nam-Andong IC (132.5 km) on the Jungang Expressway during the period from December 2020 to February 2021. Firstly, temporal road surface temperature data were converted to the spatial data with a 50 m resolution. Then, the spatial road surface temperature was normalized with zero mean and one standard deviation using a simple normalization, a linear de-trend and normalization, and a low-pass filter and normalization. The resulting road thermal map was calculated in terms of road surface temperature differences. A road ice index was suggested using the normalized road temperatures and their horizontal differences. Road sections vulnerable to black ice were derived from road ice indices and verified with respect to road geometry and sky view, etc. It was found that black ice could occur not only over bridges, but also roads with a low sky view factor. These results are expected to be applicable to the alarm service for black ice to drivers.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.347-350
• /
• 2009

In this study, it was studied about the improved road light design for drivers and pedestrians using forward or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good road light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. It is superior than conventional road light ability such as 0.35 of luminance uniformity of 400 watts power consumption lamp. Finally, we suggested reflector design for 250 watts power consumption CDM Iight source.

• 한국환경복원기술학회지
• /
• 제4권2호
• /
• pp.1-10
• /
• 2001

The purpose of this study was to investigate factors and variables which have significant effects on landscape satisfaction of urban pedestrian road in Bun-dang new town and to suggest basic information for urban pedestrian road design. These works consist of two phase. First, we tested the Hye-Cheon college students' degree of landscape satisfaction for 37 spots of urban pedestrian road and then selected 10 sports slide by the Sturges' formula. Second, we analysed factors and variables on landscape satisfaction of urban pedestrian road using the semantic differential scale method and then processed using descriptive analysis, factor analysis and multiple linear regression analysis. The major findings of this study can be summarized as follows; 1) The difference of landscape adjectives between the highest score of landscape satisfaction slide and the lowest score landscape satisfaction slide were diversity of vegetation, plenty of the shade of a tree, naturalness and cleanness. 2) Diversity of vegetation, width of road, freedom of danger and diversity of environment can be significant variables of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. 3) Factors covering the landscape satisfaction of urban pedestrian road have been found to be Environment of urban pedestrian road and Constitution of urban pedestrian road. By using the Varimaxs' rotation factor analysis for the number of factors' cumulative percentage has been obtained as 64%. 4) Environment of urban pedestrian road and Constitution of urban pedestrian road can be significant factors of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. In conclusion, the landscape satisfaction factors and variables of urban pedestrian road need to be considered in plan or design the urban pedestrian road.