• The Journal of Information Systems
• /
• v.27 no.3
• /
• pp.81-102
• /
• 2018

Purpose The purpose of this study is to investigate the reason why smartphone users do not use mobile banking based on Status Quo Bias and to find out whether there is a difference between passive resistance and active resistance. Design/methodology/approach This study made a design of the research model based on Status Quo Bias. SPSS 23.0 and SmartPLS 2.0 were used for the analysis. Multiple group analysis was performed to identify differences between groups. Findings According to the empirical analysis result, this study confirmed that inertia and perceived risk affected smartphone users who do not use mobile banking. According to the type of resistance, the active resistance group(64.2%) was more than the passive resistance group(35.8%), and it was confirmed that there was a difference in the reasons for not using mobile banking between passive and active resistance group. That is, the greatest difference between passive and active resistance groups was found to be perceived risk, which is an assessment of risk.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1070-1077
• /
• 1998

Effect of current collecting layer on the cathode was characterized by AC impedance spectroscopy at 800$^{\circ}C$ under flowing air. LSM-YSZ composite cathode showed lower polarization resistance due to the in-crease of triple phase (LSM/YSZ/Pore) boundary length by incorporation of YSZ. Ohmic resistance {{{{ {R }_{1 } }} of LSM-YSZ was higher than that of pure LSM however because in-plane resistance of the cathode was fair-ly high due to its high specific resistivity. To reduce the in-plane resistance of LSM-YSZ cathode cathode side current collecting layer was required. Ohmic resistance {{{{ {R }_{1 } }} was reduced after forming LSM current col-lecting layer on the LSM-YSZ cathode. In case of pure LSM cathode the formation of Pt, or LSCO current collecting layer reduced polarization resistance {{{{ {R }_{p } }} but ohmic resistance {{{{ {R }_{1 } }} was relatively constant. After annealing of LSM cathode with Pt current collector at higher temperature polarization resistance {{{{ {R }_{p } }} was in-creased but ohmic resistance {{{{ {R }_{1 } }} was constant. These phenomena indicate that Pt or LSCo current col-lecting layers act as a catalytic layer for oxygen reduction of pure LSM cathode. LSCO current collector was effective in reducing the ohmic and polarization resistance of LSM-YSZ cathode.

• Korean Journal of Veterinary Service
• /
• v.32 no.1
• /
• pp.93-102
• /
• 2009

In this study, antimicrobial resistance of E. coli isolated from domestic beef on sale in Busan and Gyeongnam province was investigated from March to October 2008. A total of 400 beef samples were collected for the monitoring of antimicrobial resistance, and 39 (9.8%) strains of E. coli were isolated. Antimicrobial resistance test was carried out by agar disc diffusion method with 17 antimicrobials. In general, E. coli isolates showed the highest antimicrobial resistance to tetracycline (85.3%), followed by doxycycline (76.5%), streptomycin (61.8%) and sulfamethoxazole/trimethoprim (61.8%). Then they showed higher resistance to several antimicrobials like kanamycin and neomycin (55.9%). However, They had low antimicrobial resistance to amikacin (8.8%), amoxicillin/clavulanic acid (2.9%). Of 39 isolates, 31 (79.5%) were resistant to more than 2 antimicrobials. Among 17 antimicrobials examined, tetracyclines were the most resistant, followed by aminoglycosides, sulfonamides. The resistance was seemed to be correlated to amounts of antimicrobial use. In the result of this study, we suggest that there be need to regulate the abuse of antimicrobial on food-producing animals in Korea because the concern on antimicrobial resistant is gradually increased worldwide.

• Geomechanics and Engineering
• /
• v.33 no.5
• /
• pp.519-528
• /
• 2023

In this paper, we present the results of an experimental study on the effect of polymer support fluid on shaft resistance of offshore bored piles. A series of pullout tests were performed on bored piles installed under various boundary conditions considering different types of grounds and support fluids, and a range of support fluid exposure times. Contrary to previous studies concerning onshore bored piles, a time dependent effect of polymer fluid on shaft resistance was observed in all ground types. The adverse effect of polymer support fluid on the shaft resistance, however, was considerably less than bentonite support fluid for a given exposure time. No significant reduction in shaft resistance was evident when limiting the exposure time of the polymer support fluid to the side wall of the borehole within 2-3 hours. The degree to which the polymer fluid affects shaft resistance seemed to vary with the ground type. A proper consideration should be given to the time dependent effect of polymer fluid on shaft resistance of bored piles installed in offshore construction environment to limit its adverse effect on the pile performance. The practical implications of the findings are discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.661-669
• /
• 1986

In this study, the resistance spot welding process of an aluminum alloy was analyzed through the numerical simulation including the electric contact resistance and the heat generation in the electrode. The finite element model was used to solve the electro-thermal responses in weld cycles. The resistance of the contact area was represented as the contact element modeling, but the thermal resistance between the contact surfaces was neglected. Welding tests of Alclad 2024-T3 aluminum alloy were made not only to get the input data for the numerical simulation, but also to compare the numerical results. The contact resistance was determined initially by the contact resistance tests and assumed to decay exponentially up to the solidus temperature. The temperature distributions and dynamic resistance obtained numerically were in good agreement with the experimental results. Numerical results revealed that nugget growth depends mainly on the heat generated in the workpiece and its contact area. The heat generated in the electrode has, however, only a little effect on the nugget growth, and the heat generation in the electrode-workpiece interface is initially high but decrease repidly.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.315-325
• /
• 2017

The purpose of the paper is to determine the influence of two widely used steel fibers and polypropylene fibers on the sulphate crystallization resistance, freeze-thaw resistance and surface wettability of ultra-high performance concrete (UHPC). Tests were carried out on cubes and cylinders of plain UHPC and fiber reinforced UHPC with varying contents ranging from 0.25 to 1% steel fibers and/or polypropylene fibers. Extensive data from the salt resistance test, frost resistance test, dynamic modulus of elasticity test before and after freezing-thawing, as well as the contact angle test were recorded and analyzed. Fiber hybridization relatively increased the resistance to salt crystallization and freeze-thaw resistance of UHPC in comparison with a single type of fiber in UHPC at the same fiber volume fraction. The experimental results indicate that hybrid fibers can significantly improve the adhesion properties and reduce the wettability of the UHPC surface.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.71-72
• /
• 2007

The insulation is a important part of cable. In thisb paper, measured the insulation resistance for analysing of change of insulation resistance by filler on low voltage multicore cables. The insulation resistance is not effected by only insulation material, but also filler material. The insulation resistance is different with measuring before filling and after filling by filler. When develope the new filler or cable, the volume resistance of filler must be considered.

• Steel and Composite Structures
• /
• v.8 no.6
• /
• pp.491-510
• /
• 2008

This paper presents a plan and guidelines that were drawn for Korean based research carried out on the fire-resistance of CFT columns. This research was carried out by reviewing the Korean regulations related to the fire-resistance of CFT columns and examining studies which had been made in Korea as well as overseas. The first phase of the study plan was to compare the fire-resistance of square CFT columns without fire protection (obtained through fire-resistance tests and numerical analyses) with estimated values (obtained through fire-resistance design formulas proposed in Korea and overseas). This comparison provided conclusions as outlined below. Fire-resistance tests conducted in this study proved that, when the actual design load is taken into consideration, square CFT columns without fire protection are able to resist a fire for more than one hour. A comparison was made of test and analysis results with the fire-resistance time based on the AIJ code, the AISC design formula and the estimation formula suggested for Korea. The results of this comparison showed that the test and analysis results for specimens SAH1, SAH2-1, SAH2-2 and SAH3 were almost identical with the AIJ code, the AISC design formula and estimation formula. For specimens SAH4 and SAH5, the estimation formula was more conservative than the AIJ code and the AISC design formula. It was necessary to identify the factors that have an influence on the fire-resistance of CFT columns without fire protection and to draw fire-resistance design formulas for these columns. To achieve this, it is proposed that numerical analyses and tests be conducted in order to evaluate the fire-resistance of circular CFT columns, the influence of eccentricity existing as an additional factor and the influence of the slenderness ratio of the columns. It is also suggested that the overall behavior of CFT structures without fire protection within a fire be evaluated through analysis simulation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.25
• /
• pp.211-241
• /
• 2005

Innovation resistance toward technology products such as e-Marketplace is an important concept in business to business marketing. But most of researches and literatures have not been focused on innovation resistance. Therefore, the objective of this paper is to confirm key factors that effects on the innovation resistance. Additionally this study will be revealed the factors affecting the innovation resistance to information technology of trade according to adopting stage. Based on the past literatures, the innovation resistance of users can be viewed as dependent on two sets of factors came from the study of Innovation Resistance Model(Ram, 1987):perceived innovation(e-Marketplace) characteristics and user(trading company) characteristics. Perceived innovation characteristics consists of relative advantage, compatibility, perceived risk, complexity, inhibitory effect on the adoption of profitable innovation. The user characteristics consist of innovativeness, beliefs and attitude toward existing trade method. And user adoption stage came from the study of Innovation Diffusion(Roger, 1995). To make it simple, this study divides group1(knowledge/persuasion/decision) and group2(implementation/confirmation). In the result of the empirical study, the hypothesis 1, hypothesis 2, hypothesis 4 were supported partially and hypothesis 3 was completely supported.