• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.268-271
• /
• 2001

This paper presents observer-based on-line overload monitoring scheme for a PMSM(Permanent Magnet Synchronous Motor) drive system. Proposed scheme is to monitor overload status of motor drive system at remote place. The drive system is previously installed on main system and has no communication function. Proposed scheme consists of intelligent sensing head and monitoring part. Intelligent sensing head acquire motor 3-Phase currents and transmit data to monitoring part over serial communication interface. Monitoring part estimates motor speed using state observer. By comparing estimated speed with reference speed, we can detect motor fault. In this scheme observed information must coded and transmitted over a digital communication channel with finite capacity. We consider communication constraint as time delay and we design discrete-time observer. The proposed scheme is tested on the actual drive system.

• 한국정보시스템학회지:정보시스템연구
• /
• 제14권2호
• /
• pp.155-172
• /
• 2005

Securities companies which faced with severe competition should not only attract new customers but also retain their on-line customers. This study examines the factors affecting loyalty of on-line stock trading customers. The research model based on the previous studies was established and the research hypotheses were generated. The test results based on the data gathered from 87 users of on-line stock trading services show that user satisfaction, learning cost, transaction fees, and reputation influence customer loyalty. User satisfaction, learning cost and reputation are positively related to customer loyalty, whereas transaction fee is negatively related to customer loyalty. The results also support that information quality and system quality are positively related to user satisfaction. The hypothesis that transaction fee is related to user satisfaction is not supported. There is no significant information to say that security risk is related to user satisfaction. It is considered that the study results may help managers to increase customer retention.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.567-576
• /
• 2003

In this study, a robust controller to control pressure in a pneumatic pressure vessel with a long transmission line is proposed. Frequency response of transmission line using compressible fluid is changed by the flowing state of the fluid. So, it a fixed gain controller designed based on a model supposed the flowing state to a specific state, the performance of the control system could be degraded because of the modelling error. The controller designed in this study is composed of two parts. One is a feedback controller to improve a feedback characteristics and to compensate the influence of the variation of transfer characteristics of a transmission line owing to the change of flowing state and the other is a feedforward controller to regulate command fallowing performance. The experimental results with the designed controller show that the robustness of the control system is achieved regardless of the change of the model or the transmission line. Therefore, the designed controller can be utilized for the Performance improvement of a Pressure control system with a long transmission line using compressible fluid.

• Journal of Pharmaceutical Investigation
• /
• 제23권2호
• /
• pp.97-102
• /
• 1993

Hospital pharmacy services are divided into dispensing affairs for inpatients and outpatients, pharmaceutical service, stock control, intravenous admixture service, drug information service, pharmacokinetic consultation service, education and research work, etc. But among those affairs, dispensing affair for outpatient is perceived as the most important work in Korea, because it is linked directly with hospital service for patients. Therefore, total computer system for dispensing area was adopted from opening point of hospital in 1989 in Asan Medical Center. Utilization of computer system for outpatient dispensing area is as follows; 1) Order communication system of prescription by Total Hospital Information System, 2) Automatic print-out system of direction for use by sticker connected with on-line net work, 3) Use of automatic tablet counting and packaging machines connected with on-line net work. Those computer system resulted in curtailment of pharmacy manpower and shortening of waiting-time for outpatient.

• 전력전자학회논문지
• /
• 제13권4호
• /
• pp.247-256
• /
• 2008

직류철도의 회생제동 시 발생되는 회생에너지는 급전선로의 직류가선전압의 상승에 의해 시스템의 오동작이나 차량 정류기의 파손, 또는 급전 시스템의 전력변환 장치의 고장을 일으키는 원인이 될 수 있다. 슈퍼 커패시터를 이용한 회생에너지 저장장치는 직류가선전압을 안정화 하게하는 방법이다. 본 논문에서는 슈퍼 커패시터 뱅크를 이용하여 직류철도 시스템의 에너지 저장장치를 구현하였고, 지하철 2호선 N역과 S역의 실측값을 이용하여 가선전압이 전동차에 의한 회생에너지 발생에 따른 동작 특성과 슈퍼 커패시터의 충 방전 특성을 확인하였다. 본 논문을 통하여 직류철도 시스템에 설치된 회생에너지 저장시스템용 슈퍼 커패시터 뱅크의 동작 특성을 알 수 있고, 향 후 직류철도 모든 변전소의 직류 가선전압 실측 데이터를 이용한다면, 특정 직류철도 운행 구간에 대한 회생에너지 저장장치의 운전특성과 슈퍼커패시터의 용량 및 수명 예측으로 가격을 절감 할 수 있고 전체 시스템의 안정도 와 신뢰성을 향상시킬 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2306-2309
• /
• 2011

With the opening of 1st phase and 2nd phase in Gyeongbu High Speed Line, KTX(The Korea Train Express) and Sancheon(2nd generation of High Speed Train) are operating commercially on entire line. Gyeongbu High Speed Line can be separated as several sections. In this entire line, a few types of train has operating by it's own pattern. However, commercial speed of the line compared with the maximum speed of Train is rather slow. Through this study, I found the reason of the slow speed on the Catenary system and suggested a solution.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.693-702
• /
• 2009

액체로켓엔진의 구성품 중 하나인 산화제 라인 시스템의 3차원 모델과 유동해석을 수행하였다. 전체 시스템의 유동해석에 앞서 각 구성품들의 개별적인 유동해석과 단순화된 모델을 통해 최적의 위치를 결정하였다. 그 결과 가스발생기 라인의 입구는 압력보상이 필요하며 오리피스의 위치에 따라 출구 유동의 형태가 달라지는 것을 확인할 수 있었다. 전체적으로 해석된 라인 시스템은 주어진 요구조건을 만족하는 것으로 나타났으며 이는 실제 제품 제작과 시험을 통해 확인할 예정이다.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.218-221
• /
• 2009

This paper reports on measurement method for the fiber optic strain monitoring of overhead contact line systems of trains, We used FBG (Fiber Bragg Grating) sensors to measure the strain variation of overhead contact line. FBG sensors can sensitively measure the variation of strain and! or temperature by the shift wavelength of reflected wave according to the lattice variation during the measurement. FBG sensor were attached on the contact line and connected to the monitoring system with optical fibers. The monitering system with FBG sensors showed very good sensitivity to measuring strain variation and this system could be applied to the overhead contact line of KTX (Korea Train eXpress).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2017-2022
• /
• 2009

Sinbundang Line(SBL) Train moves the transition zone where is located between Jeongja station and Migeum station switched over from Communication Based Train Control (CBTC) system area to Automatic Train Control (ATC) system area and viceversa. The SBL train to move the between SBL and Bundang Line is needed to install the Specific Transmission Module (STM) on SBL Line for interface with Bundang Line; STM receives from speed code from Bundang Line. So we suggested the method to ensure mutual compatibility and reliability for train operation on each other signaling system.