• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.1-7
• /
• 2011

Cell Capacity and cell layout are strongly dependent on the up-link interference caused by out-of-cell mobiles. Accurate prediction of the propagation path loss from out-of-cell mobiles is essential to achieve system designs that minimize the infrastructure required for a given quality of service (QOS). Less accurate predictions can be expected to yield designs requiring the use of a greater number of base stations. In order to quantify the dependence of infrastructure on prediction accuracy, this paper considers the cellular systems, LOS (line of sight) cells along a road or highway.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.18-23
• /
• 2014

The BTEX contamination of soil around gas station in Korea was investigated in 53 gas stations in 2013 by official test method on soil pollution. Each gas station was divided into oil tank area, line area, and surrounding area. The concentration of BTEX in 1066 sites of 53 gas stations was N.D.~ 3437.36 mg/kg. The order of average concentration for area was as follows: line area ($20.91{\pm}144.79mg/kg$) > tank area ($15.11{\pm}110.08mg/kg$) > surrounding area ($10.79{\pm}111.40mg/kg$). It was the number of sampling site exceeding regulatory levels at surrounding area the most at all. The average concentration of xylene was the highest, while that of ethylbenzene was the lowest.

• Journal of Environmental Science International
• /
• v.24 no.3
• /
• pp.291-302
• /
• 2015

The seasonal variations of sea surface winds and significant wave heights were investigated using the data observed from the marine meteorological buoys (nine stations) and Automatic Weather Stations (AWSs) in lighthouse (nine stations) around the Korean Peninsula during 2010~2012. In summer, the prevailing sea surface winds over the East/West Sea and the South Sea were northerly/southerly and easterly/westerly winds due to both of southeast monsoon and the shape of Korean Peninsula. On the other hand, the strong northerly winds has been observed at most stations near Korean marginal seas under northwest monsoon in winter. However, the sea surface winds at some stations (e.g. Galmaeyeo, Haesuseo in the West Sea) have different characteristics due to topographic effects such as island or coastal line. The significant wave heights are the highest in winter and the lowest in summer at most stations. In case of some lighthouse AWSs surrounded by islands (e.g. Haesuseo, Seosudo) or close to coast (e.g. Gangan, Jigwido), very low significant wave heights (below 0.5 m) with low correlations between sea surface wind speeds and significant wave heights were observed.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.160-171
• /
• 1998

Express subway system is one of the effective systems adapting to improve service level. Express trains make fewer passenger stop, using a double track or a bypass track, than local trains which served all stations, Express service has been very popular with passengers who travel uninterrupted between terminals, but is has generated some dissatisfaction among passengers who experience longer waiting time on stations. This study aims at proposing the methodology to analyze changes of travel pattern in subway system adapting the express service and to estimate the time saving effects resulting from the installation of the express system. This methodology is evaluated in the fifth line under an assumpt ion that express subway system are adapted. Based on the results of the case study, the following conclusions are made: First, express system reduce a total travel time of 13% or above. Second, shorter headway of express trains increases the time saving effects on subway system. although it requests more waiting time to local train passenger. Third, an installation of Express system to Seoul subway system can augment subway demand in seoul metropolitan area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.793-799
• /
• 2023

This study classifies the types of urban railway stations that reflect the location characteristics of urban railway stations, the structure and form of station taxes, and the number of users, and the level of inconvenience in the transfer movement line for users by station type, the number and connectivity of transfer information, and the level of transfer convenience facilities. The number of installations, conflicts between users, and transfer information signs were analyzed. As a result of data analysis, it was found that the factors that cause the most inconvenience to urban rail users when transferring are the length and curvature of the transfer line, pedestrian density and number of passengers in the transfer passage, presence or absence of transportation convenience facilities, and the size and height of transfer information letters. These transfer inconveniences were objectified, quantified, and presented as evaluation indicators that can measure the transfer convenience of urban railway stations. Additionally, an evaluation scale was developed to measure the service level for each evaluation indicator. The evaluation scale for each indicator presented six levels by applying linear interpolation based on the maximum and minimum values of data derived through field surveys. However, it is judged that a comprehensive evaluation of transfer convenience that combines the importance and weight of each convenience evaluation indicator should be established through future research.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.160-170
• /
• 2008

This paper proposes a mathematical model for converting conveyor assembly line to cellular manufacturing in complex production environments. Complex production environments refer to the situations with multi-products, variant demand, different batch sizes and the worker abilities varying with work stations and products respectively. The model proposed in this paper aims to determine (1) how many cells should be formatted; (2) how many workers should be assigned in each cell; (3) and how many workers should be rested in shortened conveyor line when a conveyor assembly line should be converted, in order to optimize system performances which are defined as the total throughput time and total labor power. We refer the model to a new production system. Such model can be used as an evaluation tool in the cases of (i) when a company wants to change its production system (usually a belt conveyor line) to a new one (including cell manufacturing); (ii) when a company wants to evaluate the performance of its converted system. Simulation experiments based on the data collected from the previous documents are used to estimate the marginal impact that each factor change has had on the estimated performance improvement resulting from the conversion.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.831-835
• /
• 2005

In a signal control of the railway system, the first objective is to guarantee a safety of the train operation, and the second is to increase a frequency(a capability of the transportation) of the train operation. In order to express the capability of the transportation a terminology what is called a railroad line capacity is employed. The railroad line capacity means a maximum frequency of the train operation in a possible schedule of the one way operation for one day. During the last several years an improvement in the facilities of the train operation (railroad line extension, improvement in the stations, improvement in the signal facilities) has been achieved to increase the railroad line capacity. In this paper the authors deal with the case analysis which try to shorten headway and which has an impartible relation with increasing of the railroad capacity

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.47-53
• /
• 2018

VSC technology is now well established in HVDC and is, in many respects, complementary to the older Line Commutated Converter (LCC) technology. Despite the various advantages of VSC technology, VSC HVDC stations have higher power losses than LCC stations. Although the relative advantages and disadvantages are well known within the industry, there have been very few attempts to quantify these factors on an objective basis. This paper describes methods to determine the operating losses of every component in the valve of VSC-HVDC system. The losses of the valve, including both conduction losses and switching losses, are treated in detail.

• Journal of Environmental Health Sciences
• /
• v.19 no.1
• /
• pp.37-43
• /
• 1993

The airborne concentrations of Sulfur Dioxide and Total Suspended Particulates were investigated in 4 subway lines in Seoul at early summer, 1990 and early summer, 1991. The results of the study were as follows: 1. The airborne concentrations of SO$_2$ and TSP were 0.022 ppm, 445.7 $\mu$g/m$^3$ respectively. And percents of over annual air quality standard of WHO was that SO$_2$ and TSP were 41.7%, 100% respectively. 2. Airborne SO$_2$ concentrations by subway lines were that line 1 was 0.025 ppm, line 2 was 0.023 ppm, line 3 was 0.020 ppm, and line 4 was 0.017 ppm. And TSP concentrations by subway lines were that line 2 was 533.8 $\mu$g/m$^3$, line 1 was 516.5 $\mu$g/m$^3$, line 4 was 371.6 $\mu$g/m$^3$, and line 3 was 369.3 $\mu$g/m$^3$ 3. Annual variation of concentration of TSP was not significant statistically (t=0.327), and that of SO$_2$, in 1990 was slightly higher than that in 1991 (t=1.433, p<0.1). 4. Coefficients of correlation between TSP and SO$_2$ by years were that early summer, 1990 was r=0.277 (p>0.1), and early summer, 1991 was r=0.32 (p>0.1).