• KIEE International Transactions on Power Engineering
• /
• 제3A권4호
• /
• pp.181-190
• /
• 2003

This paper presents the design of a fuzzy power system stabilizer (FPSS) using an adaptive evolutionary algorithm (AEA). AEA consists of genetic algorithm (GA) for a global search capability and evolution strategy (ES) for a local search in an adaptive manner when the present generation evolves into the next generation. AEA is used to optimize the membership functions and scaling factors of the FPSS. To evaluate the usefulness of the FPSS, we applied it to a single-machine infinite bus system (SIBS) and a power system simulator at the Korea Electrotechnology Research Institute. The FPSS displays better control performance than the conventional power system stabilizer (CPSS) for a three-phase fault in heavy load, which is used when tuning FPSS. To show the robustness of the FPSS, it is applied with disturbances such as change of mechanical torque and three-phase fault in nominal and heavy load, etc. The FPSS also demonstrates better robustness than the CPSS. Experimental results indicate that the FPSS has good system damping under various disturbances such as one-line to ground faults, line parameter changes, transformer tap changes, etc.

• 천문학회보
• /
• 제38권2호
• /
• pp.42.2-42.2
• /
• 2013

We investigate the cosmic evolution of the black hole mass-bulge luminosity relation with a sample of 52 moderate-luminosity AGNs at $z{\simeq}0.36$ and $z{\simeq}0.57$, corresponding to look-back times of 4 and 6 Gyrs. By employing robust multi-component spectral and structural decomposition methods to the obtained high-quality Keck spectra and high-resolution HST images, black hole masses ($M_{BH}$) are estimated from the Hbeta broad emission line with the 5100A nuclear luminosity, and bulge luminosities ($L_{bul}$) are derived from the surface photometry. Based on these consistent measurements, we constrain the redshift evolution of the $M_{BH}-L_{bul}$ relation by performing the Monte Carlo simulations designed to account for selection effects. We provide implications of our results in terms of the black hole-galaxy co-evolution and discuss possible bulge growth mechanisms.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.1-10
• /
• 2007

In recent few years, low-power electronics has been a leading drive for technology developments nourished by rapidly growing market share. Mobile DRAM, as a fundamental block of hand-held devices, is now becoming a product developed by limitless competition. To support application specific mobile features, various new power-reduction schemes have been proposed and adopted by standardization. Tightened power budget in battery-operated systems makes conventional schemes not acceptable and increases difficulty of the circuit design. The mobile DRAM has successfully moved down to 1.5V era, and now it is about to move to 1.2V. Further voltage scaling, however, presents critical problems which must be overcome. This paper reviews critical issues in mobile DRAM design and various circuit schemes to solve the problems. Focused on analog circuits, bitline sensing, IO line sensing, refresh-related schemes, DC bias generation, and schemes for higher data rate are covered.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (B)
• /
• pp.211-213
• /
• 2002

데이터베이스의 활용도가 크게 증가되고 사용자가 증가되면서 데이터베이스의 가용성과 확장성이 중요시되고 있다. 이에 따라 확장 가능한 데이터베이스는 실시간 트랜잭션의 처리를 위해 온-라인 상태로 중단 없이 동작해야 한다. 사용자의 증가에 따른 질의의 집중 현상을 해결하기 위한 데이터베이스는 사용자의 질의를 처리하면서도 확장이 가능해야 한다. 또한, 온-라인 학장은 확장 가능한 고가용 데이터베이스에서 트랜잭션의 결과 응답 시간에 영향을 미치지 않고 트랜잭션의 처리량의 저하가 없어야 한다 본 논문에서는 질의 집중 현상을 해결하기 위해 기존의 데이터베이스에서 제안된 기법들을 살펴보고 온-라인 확장에 대한 기존 연구에서의 문제점을 보이며. 개선된 은-라인 확장 기법을 제안한다 제안되는 기법은 불필요한 확장 영역을 축소시키고 확장되는 노드에 대한 정책을 변형하여 내부 네트웍 사용을 줄임과 동시에, 데이터 복사의 병렬성을 향상시킨다. 본 연구를 통해 개선된 확장기법은 온-라인 확장 시 데이터베이스의 처리량과 트랜잭션 응답 속도를 향상시키고 확장성을 유지한다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2651-2654
• /
• 2000

In this paper, we re-analyzed the fuzzy controller as conventional PID controller structure, and proposed a self tuning fuzzy PID controller whose input output scaling factors were tuned automatically. At first stage, the tuning parameters of fuzzy controller were determined by Ziegler-Nichols tuning method and then they were adjusted as the delay time and process environment were changed. Proposed controller was simple in its structrue and computational burden was small so that on line adaptation was easy to apply to. The result of computer simulation and practical experiment showed the proposed controller's excellent performance

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.178-178
• /
• 2010

With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.379-391
• /
• 1992

This study was intended to identify the constructing factors and the evaluative dimensions of clothing images. A questionnaire consisted of 110 words expressing clothing images was developed, and eight clothing photographs were selected as stimuli. 298 female subjects aged between 22 to 37 responsed to the 110 words for two photographs during September in 1991. After survey, 110 words were reduced to 62 words based on their independence, then factor analysis was conducted. As a result of factor analysis,6 factors-grace, modernity, unattractive- ness, activeness, dressiness, and youthfulness were found out as constructing factors of clothing images. One additional interest was the effect of design line to the formation of clothing images. ANOVA identified that curved line designs were perceived to be more graceful, modern, dressy, and youthful, and straight line designs were perceived to be more unattractive and active. The other interest was the effect of image factors to the total evaluation. So, regression was used. Consequently, the most influential factor to the total evaluation was found out as grace, followed by unattractiveness, modernity, youthfulness and activeness in a descending order. To identify the evaluative dimensions of clothing images, nine words of unattractiveness image factor were eliminated, and multidimensional scaling analysis was employed. Here, three dimensions were judged to be appropriate to explain the result. The first dimension in the multidimensional space was the evaluation in 'mannish image versus feminine image'. The second was the evaluation in 'simple image versus decorative image'. The third was the evaluation in 'pastoral image versus urbane image'.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.605-616
• /
• 2014

본 연구는 우리나라 도시철도들의 수송효율성을 분석하여, 수익성 측면에 있어서의 효율성을 향상시키기 위한 정책방향을 제공하고자 수행되었다. 본 연구를 통해 우리나라 도시철도들의 상대적 효율성을 측정하고, 효율성이 부족한 도시철도 노선에 대해 구조적인 문제가 존재하는지를 분석하였다. 분석대상은 전국 공공기관이 운영하는 17개 도시철도 노선이며, 자료포락분석기법(DEA)으로 노선별 효율성을 분석하였다. 분석된 결과로부터 규모의 경제성을 도출하고, 외부요인으로서 무임 손실비용과 운임제도에 따른 운수수입에의 영향정도를 파악하였다. 이 때 분석을 위한 변수로는 다중회귀분석을 통해 도출된 차량수, 운행횟수 두 생산요소를 투입하여 운수수익을 산출하는 형태로 상정하였다. 마지막으로 자료포락분석기법으로 도출된 효율성값을 다차원척도법(MDS)에 적용하여 전국 도시철도에 대한 수익성 측면의 효율성 향상방안을 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권11호
• /
• pp.2893-2912
• /
• 2013

The design of geometrically invariant watermarking is one of the most challenging work in digital image watermarking research area. To achieve the robustness to geometrical attacks, the inherent characteristic of an image is usually used. In this paper, a geometrically invariant image watermarking scheme using connected objects and gravity center is proposed. First, the gray-scale image is converted into the binary one, and the connected objects according to the connectedness of binary image are obtained, then the coordinates of these connected objects are mapped to the gray-scale image, and the gravity centers of those bigger objects are chosen as the feature points for watermark embedding. After that, the line between each gravity center and the center of the whole image is rotated an angle to form a sector, and finally the same version of watermark is embedded into these sectors. Because the image connectedness is topologically invariant to geometrical attacks such as scaling and rotation, and the gravity center of the connected object as feature points is very stable, the watermark synchronization is realized successfully under the geometrical distortion. The proposed scheme can extract the watermark information without using the original image or template. The simulation results show the proposed scheme has a good invisibility for watermarking application, and stronger robustness than previous feature-based watermarking schemes against geometrical attacks such as rotation, scaling and cropping, and can also resist common image processing operations including JPEG compression, adding noise, median filtering, and histogram equalization, etc.

• 천문학회지
• /
• 제53권5호
• /
• pp.103-115
• /
• 2020

We analyze the spatially resolved kinematics of gas and stars for a sample of ten hidden type 1 AGNs in order to investigate the nature of their central sources and the scaling relation with host galaxy stellar velocity dispersion. We select our sample from a large number of hidden type 1 AGNs, which are identified based on the presence of a broad (full width at half maximum ≳1000 km s^-1) component in the Hα line profile and which are frequently mis-classified as type 2 AGNs because AGN continuum and broad emission lines are weak or obscured in the optical spectral range. We used the Blue Channel Spectrograph at the 6.5-m Multiple Mirror Telescope to obtain long-slit data with a spatial scale of 0.3 arcsec pixel^-1. We detected broad Hβ lines for only two targets; however, the presence of strong broad Hα lines indicates that the AGNs we selected are all low-luminosity type 1 AGNs. We measured the velocity, velocity dispersion, and flux of stellar continuum and gas emission lines (i.e., Hβ and [O III]) as a function of distance from the center. The spatially resolved gas kinematics traced by Hβ or [O III] are generally similar to the stellar kinematics except for the inner center, where signatures of gas outflows are detected. We compare the luminosity-weighted effective stellar velocity dispersions with the black hole masses and find that our hidden type 1 AGNs, which have relatively low back hole masses, follow the same scaling relation as reverberation-mapped type 1 AGN and more massive inactive galaxies.