• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.193-204
• /
• 2013

The growing logistics strategy of a company is to optimize their vehicle route scheduling in their supply chain system. It is very important to analyze for continuous pickups and delivery vehicle scheduling. This paper is a computational study to investigate the effectiveness of continuous pickups and delivery vehicle routing problems. These scheduling problems have 3 subproblems; Inbound Vehicle Routing Problem with Makespan and Pickup, Line-haul Network Problem, and Outbound Vehicle Routing Problem with Delivery. In this paper, we propose 5 heuristic Algorithms; Selecting Routing Node, Routing Scheduling, Determining Vehicle Type with Number and Quantity, and Modification Selecting Routing Node. We apply these Algorithms to S vehicle company. The results of computational experiments demonstrate that proposed methods perform well and have better solutions than other methods considering the basic time and due-date.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.432-440
• /
• 2015

UGVs(Unmanned Ground Vehicles) are robots that can substitute humans in reconnaissance operations of potentially dangerous and contaminated sites. Currently, there have been active research on utilizing UGVs in military environments. Much resrach has been focused on exploiting the weakness of topology-based routing and instead utilize location-based routing for the networking of UGVs. It is generally assumed that location-based routing methods can fully utilize the location information gained from GPS. However, this may not be possible in tactical environments due to enemy GPS jamming and LOS(Line of Sight) limitations. To solve this problem, we propose a location-based routing scheme utilizing low control message that can calibrate the location information using GPS information as well as location of neighboring UGV, movement direct and speed information. Also utilizing topology-based routing scheme to solve incorrect location information in GPS jamming region.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.127-139
• /
• 1998

The objectives of this study is at the development of the channel routing model which can be used for flood prediction. Among the routing models, the hydraulic technique of the implicit scheme in the dynamic equation is selected to route the unsteady varied flow in the open channel. The channel routing model is catchment runoff which computed by the conceptual and transfer function model. The conceptual and transfer function model can simulate the catchment runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor ${\theta}$ which fixes two points between time line is chosen, and also, the optimal error tolerance which satisfies computing time and converge of solution is determined in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2231-2252
• /
• 2012

With the prevalence of diverse services-oriented applications, such as IPTV systems and on-line games, the current underlying communication networks face more and more challenges on the aspects of flexibility and adaptability. Therefore, an effective and efficient multicast routing mechanism, which can fulfill different requirements of different personalized services, is critical and significant. In this paper, we first define the neighbor gradient, which is calculated based on the weighted sum of attributes such as residual link capacity, normalized hop count, etc. Then two distributed multicast routing algorithms which are neighbor Gradient-based Multicast Routing for Static multicast membership (GMR-S) and neighbor Gradient-based Multicast Routing for Dynamic multicast membership (GMR-D), are proposed. GMR-S is suitable for static membership situation, while GMR-D can be used for the dynamic membership network environment. Experimental results demonstrate the effectiveness and efficiency of our proposed methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.939-955
• /
• 2010

With the progress of IT and mobile positioning technologies, various types of location-based services (LBS) have been proposed and implemented. Finding a shortest path between two nodes is one of the most fundamental tasks in many LBS related applications. So far, there have been many research efforts on the shortest path finding problem. For instance, $A^*$ algorithm estimates neighboring nodes using a heuristic function and selects minimum cost node as the closest one to the destination. Pruning method, which is known to outperform the A* algorithm, improves its routing performance by avoiding unnecessary exploration in the search space. For pruning, shortest paths for all node pairs in a map need to be pre-computed, from which a shortest path container is generated for each edge. The container for an edge consists of all the destination nodes whose shortest path passes through the edge and possibly some unnecessary nodes. These containers are used during routing to prune unnecessary node visits. However, this method shows poor performance as the number of unnecessary nodes included in the container increases. In this paper, we focus on this problem and propose a new border line-based pruning scheme for path routing which can reduce the number of unnecessary node visits significantly. Through extensive experiments on randomly-generated, various complexity of maps, we empirically find out optimal number of border lines for clipping containers and compare its performance with other methods.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.11-19
• /
• 2011

In this paper, Service Boundary Line approximation method is proposed to improve the accuracy of aggregated link state information for source routing in transport networks that conduct hierarchical QoS routing. The proposed method is especially useful for aggregating links that have both delay and bandwidth as their QoS parameters. This method selects the main path weight in the network and transports the data to the external networks together with the aggregation information, reducing information distortion caused from the loss of some path weight during aggregation process. In this paper, the main path weight is defined as outlier. Service Boundary Line has 2k+5parameters. k is the number of outliers. The number of storage spaces of Service Boundary Line changes according to the number of outliers. Simulation results show that our approximation method requires a storage space that 1.5-2 times larger than those in other known techniques depending on outlier selection method, but its information accuracy of proposed method in the ratio between storage space and information accuracy is higher.

• Nuclear Engineering and Technology
• /
• v.28 no.4
• /
• pp.390-396
• /
• 1996

Piping Systems are usually designed for thermal expansion loads based on uniform temperatures at each cross section. However, in lines with low flow rates such as surge lines and spray lines, large transverse temperature gradients have been observed, resulting in too types of additional thermal stresses : (1) local thermal gradient stresses which are independent of routing and supports and (2) gross bending stresses due to induced pipe curvature which are routing and support system dependent. This paper presents a simplified method for analyzing a PER surge line for stratified flow.

• IE interfaces
• /
• v.15 no.4
• /
• pp.374-381
• /
• 2002

In this paper, we design and implement a real-time route guidance system(RGS) in large-scale networks. Coupled with the well-known mathematical routing algorithms, we devise an RGS for knowledge aquisition and self-learning ability within the framework of the expert system. Through off-line construction of database, on-line treatment of unexpected traffic accidents, etc., the developed RGS can provide drivers with good quality real-time routing information. The practical effectiveness of the proposed system is demonstrated in terms of response time and route appropriateness.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.261-267
• /
• 2016

In this paper, we studied the range-free localization algorithm between sensor nodes based on the Radical Line for sensor networks. Routing in wireless sensor networks should reduce the overall energy consumption of the sensor network, or induce equivalent energy consumption of all the sensor nodes. In particular, when the amount of data to send more data, the energy consumption becomes worse. New methods have been proposed to address this. So as to allow evenly control the overall energy consumption. For this, the paper covers designing a localization algorithm that can obtain the location information of the peripheral nodes with fewer operations. For the operation of the algorithm is applicable Radical Line. The experimental environment is windows 7, the Visual C ++ 2010, MSSQL 2008. The experimental results could be localized to perform an error rate of 0.1837.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1879-1884
• /
• 2007

In the electric power industry, it is important that the supply of energy must be guaranteed. Many power utilities control and supervise the transmission line to avoid power failures. In case of underground tunnel, some troubles are reported in cable joint. To stabilize the power, it is needed to monitor the cable joint. Many researches of cable joint monitoring have been going on by partial discharge measurement and temperature measurement using optical cable. These methods need much cost to install and maintain, so it is only used in critical transmission line. In this research, we use wireless sensor technology, because of its low cost and easy installation. We develop the temperature monitoring system for cable joint. Temperature sensor is installed on the surface of cable joint and sends data to server through router node using wireless network. Generally Ad hoc routing is searched in wireless network. However, in this research, we design the static linear routing mechanism, which is suitable for electric power line monitoring and analyze the life time of the sensor node by measuring the amount of the battery consumption.