• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.6
• /
• pp.1431-1436
• /
• 2007

In order to optimize the extract condition and improve physiological activity of the extract form Tricholoma matsutake, experiments related to extraction methods, totale yield, content of total soluble polysaccharide, SOD-like activity, total polyphenol amount, and volatile flavor compound and the others were carried out, results were obtained as following: Compare with traditional hydrothermal extraction method (Hot water extraction : HWEW), it illustrates that the low temperature extraction method which combines a supersonic waves and microwave (Supersonic microwave extraction : SMEW) causes of increasing the total yield, total soluble polysaccharide. As to the anti-oxident effect, SMEW method leds to increasing of the SOD-like activity, total polyphenol amount as well. Also, cytotoxic effect and growth inhibitory effect against cancer cell line are much higher in SMEW method than HWEW method, especially SMEW5 extracts treated by supersonic 15 min. and microwave 120W, 3 min. and 2 times. The main volatile flavor compound and infinitesimal volatile flavor compound both increase significantly by SMEW method. It is concluded the main components of the volatile flavor compounds extracted from Tricholoma matsutake are 1-octen-3-0l, Methyl cinnamate, 2-octeno1 et al. alcohol typies. Consequently, SMEW5 method is considered as the most effective one for anti-oxidant and is prior to any other methods. And the optimun conditions of this method are : supersonic waves (supersonic, 25KHz, 50W) 15 minutes, microwave spectroscopy (microwave, 2,450MHz, 120W) 3 minutes, and every treatment is performed once followed twice repeats.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.465-468
• /
• 2008

Recently, VOD market is getting increased and most of public, educational organization, enterprises are providing service as content managing system of WMV standard subordinated to Window OS of Microsoft company. VOD CMS of WMV standard have problem that frequent cut-off, small-size of screen, and image quality which is also chronic problem. In order to solve this problem, technology solving the problem has developed through minimization of buffering time, screen size, high quality sound, and high quality image by image codec and streaming engine which is H. 264. But there are still a problem that systematic management of contents or distribution is difficult. This study expected that there would be a effect preoccupying significant stand of world wide H.264 high quality image mobile VOD managing market by securing domestic on-line VOD contents integrated managing technology by designing system for image VOD contents management having a limit in wmv market and combining H.264 which is new technology.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.589-594
• /
• 2002

Natural clonal stock of triploid crucian carp, Carassius aurahs was identified and its cytogenetic, molecular genetic and morphological traits were studied. Cytogenetic analysis of the clonal crucian carp revealed that they were natural triploidy, evidenced by 1.5-fold increases of cell size, DNA content, and chromosome number. Multi-locus DNA fingerprinting using $(GATA)_4$ probe showed that they had an identical fingerprint profile, indicating the clonal propagation of the population. External morphology and morphometric characteristics of triploid individuals were much uniform compared to those of diploids. Natural triploid crucian carp was proven to be all-female in this study.

• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.455-462
• /
• 2012

Al-Si coated boron steel and Zn coated DP steel plates were laser-welded to manufacture a Tailor Welded Blank (TWB) for a car body frame. Hot-stamping heat treatment ($900^{\circ}C$, 5 min) was applied to the TWB weld, and the microstructural change and transformation mechanism were investigated in the Al-rich area near the bond line of the Al-Si coated steel side. There was Al-rich area with a single phase, $Fe_3(Al,Si)$, which was transformed to ${\alpha}-Fe$ (Ferrite) after the heat treatment. It could be explained that the $Fe_3(Al,Si)$ phase was transformed to ${\alpha}-Fe$ during heat treatment at $900^{\circ}C$ for 5 min and the resultant ${\alpha}-Fe$ phase was not transformed by rapid cooling. Before the heat treatment, the microstructures around the $Fe_3(Al,Si)$ phase consisted of martensite, bainite and ${\alpha}-Fe$ while they were transformed to martensite and ${\delta}-Fe$ after the heat treatment. Due to the heat treatment, Al was diffused to the $Fe_3(Al,Si)$ and this resulted in an increase of Al content to 0.7 wt% around the Al-rich area. If the weld was held at $900^{\circ}C$ for 5 min it was transformed to a mixture of austenite (${\gamma}$) and ${\delta}-Fe$, and only ${\gamma}$ was transformed to the martensite by water cooling while the ${\delta}-Fe$ was remained unchanged.

• Journal of Korean Clinical Nursing Research
• /
• v.17 no.3
• /
• pp.307-318
• /
• 2011

Purpose: This study was to identify topics for evidence-based clinical nursing practice guidelines in Korea. Methods: Data were collected from 330 staff nurses from 10 general hospitals and 53 nurses in charge of nursing education in 110 hospitals with over 500 beds. Using open questions, the nurses identified activities which could not be verified, which lacked consistency among nurses, clinical units and/or hospitals, which were not based on the up-to-date knowledge and which needed reform. The data were analysed by content analysis using a qualitative methodology. Results: Collected data consisted of 1882 clinical topics, which were classified into 50 topics, 207 mid-categories, and 456 sub-categories. The most frequent topics in order of frequency were medications, central line management, intravenous injections, urinary catheterization, perioperative nursing care, skin tests, pressure ulcer care, blood transfusions, laboratory examination-culture, respiratory care which were performed routinely in clinical setting by staff nurses. Conclusion: The research findings indicate the urgent need to develop evidence-based clinical nursing practice guidelines related to these research findings. Further research is needed to identify topics related to health promotion, and symptom/management of health problem.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.283-288
• /
• 2019

We propose a method to search for similar images by using outline lines and viewpoints. In the first test, the three-dimensional image, which can't control the motion, has lower search accuracy than the static flat image. For the cause analysis, six specific tropical fish data were selected. We made a 3D graphics of tropical fishes of each kind, and we made 144 image outline lines with 12 stage viewpoints of top, bottom, left and right. Tropical fish by type were collected and sorted by time of search through similar search. Studies have shown that there are many unique viewpoints for each species of tropical fish. To increase the accuracy of the search, a User Interface was created to select the user's point of view. When the user selects the viewpoint of the image, a method of showing the result in consideration of the range of the related viewpoint is proposed.

• New & Renewable Energy
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2022

This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.103-113
• /
• 2022

As globalization progresses and localization takes place, interest in local culture is increasing. In line with this trend, the Cultural Heritage Administration has been promoting the Cultural Heritage Night Tour Project as a night-type cultural property tourism content since 2016. Cultural property nightlife, part of the regional regeneration project, creates new added value by converging and combining various historical and cultural-related contents centered on local cultural heritage. Although the "cultural nightlife" has been greatly activated, it is judged that changes are needed to continue. This is because fixed nightlife programs are positive in terms of establishing a nationwide network, but there is a limitation in that they cannot be standardized and expanded to various forms. Therefore, in this study, the meaning and limitations of nightlife programs were identified, and cognitive theory applicable to nightlife programs was considered. Through this process, it was confirmed that cognitive poetry's 'circular for dynamic semantic composition', 'surreal foreground', and 'adventures in time and space' can be applied to nightlife programs. As a result of combining cognitive poetry with nightlife programs, it was possible to present a strategy for implementing nightlife programs differentiated from existing nightlife programs.

• Asia pacific journal of information systems
• /
• v.30 no.3
• /
• pp.568-589
• /
• 2020

Recently, Social media has become a concern for businesses, including Small and Medium Enterprises (SMEs). SMEs began to adopt social media to support their performance. To benefit from the application of social media, SMEs must implement the right strategy. This study aims to analyze the factors that influence the use of social media in SMEs. Furthermore, alignment between social media functionalities and strategies and their effect on SME's performance are investigated. A case study is conducted in Gymi, a garment SMEs in East Java, Indonesia. The data collection includes interviews with the owner of SMEs, observations, and document analysis. Data analysis is performed by pattern matching, which matches the patterns from the literature with data from the case study. The results of this study show that cost-effectiveness, interactivity, and compatibility are factors that influence the use of social media in Gymi. The social media used by Gymi are Instagram, Facebook, YouTube, WhatsApp, and LINE. However, the main social media used to support Gymi's functions is Instagram. Gymi has a relatively good social media strategy as it has defined a specific goal, target audience, and channel selection for social media (Instagram). It also has specific resources and policies to handle social media. Gymi monitors and evaluates their social media content activities. These strategies are aligned with the Instagram feature used to support Gymi's function, particularly marketing, sales, customer service, and to some extent, internal operation. The alignment contributes to Gymi's performance measured by the increase in reputation (number of Instagram followers) and sales.