• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권2호
• /
• pp.53-60
• /
• 2003

This paper deals with steady-state analysis of a single-phase line-start permanent magnet synchronous motor. In order to analyze the steady-state characteristics, the asymmetric single-phase line-start synchronous motor is converted to the symmetric two-phase synchronous motor, that is, the asymmetric magnetic field is separated from the positive and the negative symmetric components using symmetrical-component theory. The analysis method of the synchronous motor on the d-q axis coordinates is used for the positive component and the equivalent circuit of the induction motor is applied for the negative component analysis. Moreover, d-q axis inductance considering current phase angle is applied to positive component analysis for precise characteristic analysis. In order to validate the proposed analysis method, the analysis results are compared with the experimental results.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.51-58
• /
• 2012

As a basic study to improve hooking ability of long line fishing gear, which is widely used around Jeju-do coast, the researcher performed hooking experiment of parrot fish by manufacturing and installing 7 kinds of model long line fishing gears, whose thickness of branch line are different and 8 kinds of model long line fishing gear, whose length of branch line are different, in indoor circular aquarium, which is installed for the model experiment of thickness and length of branch line that are various by fishing implement and improper. The hooking rate depending on thickness and length of branch line was calculated and the effect of thickness and length of branch line on hooking rate was analyzed. Its results are as follows. When branch line was thin and long, high hooking rate appeared. In the scope of value setting, the relationship between thickness ($B_t$) of branch line and total hooking rate ($Th_r$) can be shown as following formula as. In the scope of value setting, the relationship between length ($B_t$) of branch line and total hooking rate ($B_t$) can be shown as $Th_r=-20.83B_t+26.04$. Through Pearson correlation analysis, the coefficient of correlation between thickness of branch line and hooking rate was -0.718. Therefore it showed significance in 0.01 significance level. Through Pearson correlation analysis, the coefficient of correlation between length of branch line and hooking rate was 0.431. Therefore it showed significance in 0.01 significance level.

• 대한간호
• /
• 제37권1호
• /
• pp.107-115
• /
• 1998

There is an important concern regarding the First-line nurse manager's leadership because of the recognition that effectiveness of Leadership in this position results in benefits for the whole health care organization. So knowledge and practice of effective leadership behavior are now more essential to nursing than ever before. First-line Nurse Managers must be effective leaders to meet today's challenge because staff nurse, patient are affected by them. So the purpose of this study was to identify and to analyse the need for Leadership program of First-Line nurse managers in university hospitals. There were three major purposes of this study. First, identify First-line nurse managers general characteristic, second, identify their experience of leadership training, third, identify and analysis their demands for leadership training program. The subjects for this study was 167 First-line nurse manager randomly from 18 university hospitals in Korea. The data were collected through questionnaires from Oct. 13th to Nov. 20th, 1997, data was analysed using frequencies and percentages. Especially the steps of analysis of descriptions were as follows: Initial analysis centered on the identification of the demands of first-line nurse managers. Later analysis collapsed the demands into broad categories. From the collect data, 283 demands of first-line nurse managers were identified. These demands were then sorted into 3 broad categories that included : Self development as first-line nurse managers, relationship with others, and practice. The result of the study were as follows ; 1) Most of nurse managers(79.6%) had leadership training course and had good experience to improve self leadership. 2) Their demands of leadership training course are as follows First, for self as first-line nurse managers, they want to learn leadership theory, identify their leadership style and then develop their leadership skill. Second, for others as first-line nurse managers, they want to improve their communication skill, empowering others, relationship with others. Third, for patients as first-line nurse managers, improve their knowledge of practice. From the above finding, this study can be suggested the following; 1. Develope a leadership training course to improve first- line nurse manager's leadership skill according to their demands, so they will be better able to lead staff nurses for organization purposes. 2. When develope leadership training program, it must be contained the factors which first-line nurse managers want to learn.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권9호
• /
• pp.467-473
• /
• 2002

In this paper, a fault location algorithm is suggested for line to line faults in distribution networks. Conventional fault location algorithms use the symmetrical component transformation, a very useful tool for transmission network analysis. However, its application is restricted to balanced network only. Distribution networks are, in general, operated in unbalanced manners, therefore, conventional methods cannot be applied directly, which is the reason why there are few research results on fault location in distribution networks. Especially, the line to line fault is considered as a more difficult subject. The proposed algorithm uses direct 3-phase circuit analysis, which means it can be applied not only to balanced networks but also to unbalanced networks like distribution a network. The comparisons of simulation results between one of conventional methods and the suggested method are presented to show its effectiveness and accuracy.

• 경영정보학연구
• /
• 제10권2호
• /
• pp.21-48
• /
• 2008

본 연구는 온라인 게임 산업의 구조적인 변화와 IPTV 환경변화에 초점을 두고 IPTV 도입에 따른 게임 산업의 변화를 시나리오 플래닝을 통해 제시해 보았다. 분석의 절차는 IPTV 도입과 관련하여 온라인 게임 산업에서 제기 되고 있는 핵심이슈들을 선별하고 각 이슈 별로 주요 추세와 불확실성요인들을 분석하여 IPTV 도입에 따른 온라인 게임 산업의 변화 양상을 논리적인 시나리오들로 제시하였다. 그리고 미래 발생 가능한 시나리오에 따른 온라인 게임 업체들의 전략적 대응 방안의 방향성을 제시하였다. 시나리오 수립에 앞서 온라인 게임 산업의 디지털 콘텐츠로써 고유한 특성과 IPTV 환경변화에 따른 산업 구조적인 변화를 반영하기 위해 디지털 콘텐츠 가치사슬 분석을 실시하였다. 분석을 통해 시나리오의 핵심이슈를 도출하고 각각에 영향을 미치는 영향요인들을 도출하였으며, 영향력과 불확실성 정도에 따라 이들 영향요인을 각각 주요추세와 불확실성 요인으로 분류할 수 있었다. 이중 불확실성이 크고 영향력이 높은 요인들을 핵심문제로 정의하였다. 이들 분석 결과를 바탕으로 형태학적 분석기법을 통해 시나리오를 수립하였다. 수립된 시나리오를 바탕으로 최종적으로 IPTV 도입에 따른 온라인 게임 환경 변화 상황에서 기업이 선택 가능한 전략적 대안의 방향을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.616-619
• /
• 1995

This paper describes developement of on-line system for vibration signal analysis. In the power system, the main reason of transformer fault is due to a large amount of current by a short-circuit and a ground-fault. The electromagnetic force caused by fault-current deforms transformer windings and results in vibration pattern change. Therefore if the continuous on-line vibration monitoring on transformer is performed, an incipient failure can be detected. The developed system is composed of data acquisition devices, user interface program, signal processing program, diagnosis and trend analysis program, self diagnosis program and communication program.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1121-1124
• /
• 2004

Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. The diagnosis methods in off-line most are the method for virgin and last aged sample. However, the diagnosis method in on-line is method that can be evaluate sample state as progressing continuously aging test in beginning, The diagnosis method in on-line is arranged as following: leakage current measurement, electric field, surface state investigation, thermal image, emitting light measurement and then so. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.165-173
• /
• 2014

This study is about determination of fire origin by using analysis of shadow that was recorded CCTV data at the fire scene. This analysis is based on straight and radiate nature of light. At fire experiment with about 1m flame, we conformed that 2-dimensional extension line is focused at the bottom of the fire. If the fire is burning at the same level with shadow, it indicate the point of origin exactly. In 3-dimensional analysis that connect extensional line between distinctive points the shadow and the objet, the line focused in the ${\emptyset}$ 50cm-circle. We estimate the reason of that is because of the character of combustion of gases. The line indicate not the point of origin but the flame that is over the point of origin. thus, you have to consider the line indicate the flame when you do 3-dimensional analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권11호
• /
• pp.4567-4570
• /
• 2014

Background: This systemic analysis was conducted to evaluate the efficacy and safety of pemetrexed based chemotherapy in treating patients with metastatic breast cancer as first or second line chemotherapy. Methods: Clinical studies evaluating the efficacy and safety of pemetrexed based regimens on response and safety for patients with breast cancer were identified using a predefined search strategy. Pooled response rate (RR) of treatment were calculated. Results: In first line pemetrexed based regimens, 10 clinical studies which including 513 patients with advanced breast cancer were considered eligible for inclusion. For second line pemetrexed based chemotherapy, 5 clinical studies which including 281 patients with advanced breast cancer were considered eligible. Systemic analysis suggested that, in all patients, pooled RR was 32.6% (167/513) in pemetrexed based first line regimens, and 13.9 % (39/281) in pemetrexed based second line regimens. Major adverse effects were neutropenia, leukopenia, fatigue, and anemia in pemetrexed based first line treatment; and lymphopenia, neutropenia, leukopenia, as well as anemia in second line chemotherapy. One treatment related death occurred with pemetrexed based second line treatment. Conclusion: This systemic analysis suggests that pemetrexed based first line regimens are associated with a reasonable response rate and acceptable toxicity, however with low response rate for treating patients with metastatic breast cancer when is used in the second line.

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.69-80
• /
• 2002

선박의 곡외판은 냉간가공과 열간가공(선상가열) 과정을 거쳐 제작된다. 선상가열의 자동화 및 기계화에 대한 연구가 다양하게 수행되어 오고 있다. 특히 가열조건과 잔류 변형 사이의 관계규명은 자동화 및 기계화를 위한 주요 요소로 생각된다. 본 연구는 그러한 관계를 규명하기 위하여 일련의 체계적인 과정을 제시하고 관계식을 제안하였다. 선상가열에 의한 변형은 3차원 열탄소성 변형현상으로 정식화될 수 있으며, 열탄소성 변형현상을 유한요소해석을 이용하여 다양한 가열조건에 대한 수치해석을 수행하였다. 유한요소법의 유용성을 검증하기 위하여 실험을 수행하였고 그 유용성을 확인하였다 변형관계식에 사용된 입력변수는 차원해석을 통하여 선정하였다. 유한요소법을 이용하여 얻어진 결과를 활용하여 선상가열에 의한 변형관계식을 추정하기 위하여 다변수해석과 다차원 보관과정을 예시하였다. 일련의 과정을 통하여 본 연구는 선상가열의 가열조건과 잔류 변형 사이의 관계식을 선정하기 위한 방법을 제안하였다.