• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.130-134
• /
• 2007

I present a novel curvature profilometer devised fur the profile measurement of aspheric and free-form surfaces on the nanometer scale. A profile is reconstructed from measuring the curvature of a test part of the surface at several locations along a line. For profile measurement of free-farm surfaces, methods based on local part curvature sensing have strong appeal. Unlike full-aperture interferometry they do not require customized null optics. The measurement accuracy of the curvature profilometer was assessed by comparison with a well-calibrated interferometer in NIST. Experimental results prove that the maximum discrepancy turns out to be 37 nm on the 28 mm measurement range for the spherical mirror.

• Journal of Veterinary Clinics
• /
• v.34 no.3
• /
• pp.213-217
• /
• 2017

A 1-year and 8-month-old male, thoroughbred horse showed fever ($39.8^{\circ}C$), cardiac murmur, tachycardia up to 80 beats/min, anorexia, depression and lameness for about 2 months. The dead horse was referred to pathology laboratory at the College of Veterinary Medicine in Jeju National University. At necropsy, Severe protruding multiple rough cauliflower-like yellowish red nodules ranged $5{\sim}6{\times}2{\sim}3cm$ in size were attached on the mitral valve of the left heart. A yellowish red long stick-shaped thrombus $15{\times}3.5{\times}1.5cm$ in size was also present inside the right ventricle. Multifocal infarcts were scattered in the myocardium and renal cortex. Histopathologic examination revealed that morphologic diagnosis were vegetative endocarditis, thrombus in right ventricle, infarcts in myocardium and kidney, pulmonary congestion and edema, and splenic congestion. The isolated bacteria from vegetative lesions and thrombus were confirmed as Escherichia (E.) coli based on the bacterial culture and VITEK 2 system. Based on the gross and histopathologic features, and bacterial test, this case was diagnosed as vegetative endocarditis with thrombus formation associated by E. coli in a thoroughbred horse.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.5
• /
• pp.1-11
• /
• 2017

A study on Nacelle Lidar (Light detection and ranging) measurement error and the data reliability verification was carried out at Haengwon wind farm on Jeju Island. For measurement data error processing, the characteristics of Nacelle Lidar measurements were analyzed by dividing into three parts, which are weather conditions (temperature, humidity, atmosphere, amount of precipitation), mechanical movement (rotation of wind turbine blades, tilt variation of Nacelle Lidar) and Nacelle Lidar data availability. After processing the measurement error, the reliability of Nacelle Lidar data was assessed by comparing with wind data by an anemometer on a met mast, which is located at a distance of 200m from the wind turbine with Nacelle Lidar. As a result, various weather conditions and mechanical movement did not disturb reliable data measurement. Nacelle Lidar data with availability of 95% or more could be used for checking Nacelle Lidar wind data reliability. The reliability of Nacelle Lidar data was very high with regression coefficient of 98% and coefficient of determination of 97%.

• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.24-31
• /
• 2021

Through 'The Renewable Energy 3020 Implementation Plan' for carbon neutrality, the government promised to raise the proportion of renewable energy generation to 20% and renewable energy installation capacity to 63.8% by 2030. Therefore, we plan to test a 5.5 MW offshore wind turbine near Maldo, Gunsan. In this project, we measure the level of public acceptance and perform ordinary least squares (OLS) regression analysis to show the determinants of public acceptance. The regression results are as followed. First, it is judged that the closer the distance to the offshore wind turbine, the more the economic effects considered by residents. Second, especially in Maldo, the experience of being discriminated from the Saemangeum project, is understood to have caused distrust in the surrounding fishing villages chief/Fisheries Cooperatives, converted into a local community effect. Finally, the policy implications are as follows. First, a bottom-up problem-solving method is required to improve public acceptance, based on the Living Lab. Second, the island community may be indifferent to the briefings or forums of outsiders. Therefore, a gradual approach is required through (in)formal channels based on reliability from a long-term perspective with nearby universities and research institutes using SamsØ Energy Academy.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.71-71
• /
• 2020

Xanthoceras sorbifolia Bunge, the sole species in the genus Xanthoceras, is a flowering plant in the family Sapindaceae. It is an important tree species being a source of edible oil and biodiesel with a capacity as a pioneer of degraded and desert land. Seeds of X. sorbifolia were collected from two plantations and two superior trees in Inner Mongolia; and one plantation and one superior tree in Liaoning, China. An inter simple sequence repeat (ISSR) analysis showed genetic variation among four artificial populations in China: two in Inner Mongolia (IM), one in Liaoning (LN), and one in Shandong (SD). The average percentage of polymorphic loci was 81.25 % for these four populations. Based on an analysis of molecular variance, 23 % of the total genetic variation was found among populations, and 77 % within populations. Traits of seeds varied considerably between and among areas, for example two trees produced quite different seeds in several traits although they are adjacent to each other in the same farm. As much attention has not been paid to the traits of seeds, there should be a genetic test to understand this variation. It is necessary to obtain information on seed characteristics first and then provide basic information for further research on the selection of superior trees and provenances.

• Korean Journal of Agricultural Science
• /
• v.45 no.1
• /
• pp.120-127
• /
• 2018

The rural labor force has gradually been decreasing due to the decrement of the farm population and the increment of the aging population. To solve these problems, it is necessary to develop and study autonomous agricultural machinery. Therefore, analyzing the dynamic behavior of vehicles in an autonomous agricultural environment is important. Until now, most studies on agricultural machinery, especially on ground vehicle dynamics, have been done by field tests. However, these field test methods are time consuming and costly with seasonal restrictions. A research method that can replace existing field test methods by using simulations is needed. In this study, we did basic research analyzing the effect of the travelling speed of a tractor on tire slip using simulation software. A tractor simulation model was developed based on field conditions following a straight path. The simulation was done for three ranges of speed: 20 - 30 km/h (considered the normal travelling speed range), 6 - 8 km/h (considered the plow tillage speed range) and 2 - 4 km/h (considered the rotary tillage speed range). The results of the simulation show that the slip ratio and slip angle values tended to increase as the traveling speed range of the tractor decreased. From the simulation results, it can be concluded that at low tractor speeds, it becomes more difficult to control the vehicle path. In future research, simulations will be done with various work environments such as a curved path as well as with various friction coefficient conditions, and the simulation results will be experimentally verified by applying them to an agricultural tractor.

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.88-93
• /
• 2009

In 2008, leaf rot and blight on pepper seeding ("Dokya-chungchung") occurred in a pepper farm at Hwaseong-si, Gyeonggi-do, Korea. The typical symptom is water-soaking and dark brown leaf blight at edges and tips of leaves. The fungal colonies isolated from infected tissues were pinkish at first and turned gradually to gray. Conidia were fusiform, non-septum, and $8.1-17.0{\times}2.0-3.8{\mu}m$ in size. Several specific PCR primers derived from the sequence of the internal transcribed spacer (ITS) region of the rDNA, such as CaINT, CgINT and CcINT were used for the identification of the fungal pathogen. The C. acutatum-specific primer CaINT was amplified single fragment of 496 bp that discriminated C. acutatum from the other species. The pathogenicity test was performed on seedlings and fruits of red pepper. On the basis of the morphological, molecular characteristics and pathogenicity test, we identified as Colletotrichum acutatum. This is the first report on leaf rot and blight on pepper seedling caused by C. acutatum in Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.274-279
• /
• 2005

Impact is one of the major cause of damage to fruits druing varios processes from the production on the farm to the consumer. The tissue of fruits are ruptured in a very short period time less than 10ms by impact loading. Mechanical behavior of fruits under impact loading can be analyzed better with high speed sampling data acquisition system and one of them is a digital storage oscilloscope. A impact test system was developed to test the physical properties of fruits including apple, pear, and peach which may lead to a better understanding of the physical laws. The test system consisted of a digital storage oscilloscope and simple mechanism which can apply impact force to fresh produce. Rupture force, energy, and deffrmation were measured at the five levels of drop heights from 4 to 24cm fur each internal and external tissues. Rupture forces for apple and pear were in the range of 72.9 to 87.7 N and 70.8 to 84.1 N for external and internal tissues, respectively. Rupture forces far peach external tissues were in the range of 43.4 to 65.0 N.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.759-766
• /
• 2023

Visual estrus observation can only be confirmed at a rate of 50%-60%, which is lower than that obtained using a biosensor. Thus, the use of biosensors provides more opportunities for artificial insemination because it is easier to confirm estrus than by visual observation. This study determines the accuracy of estrus prediction using a ruminoreticular biosensor by analyzing ruminoreticular temperature during the estrus cycle and measuring changes in body activity. One hundred and twenty-five Hanwoo cows (64 with a ruminal biosensor in the test group and 61 without biosensors in the control group) were studied. Ruminoreticular temperatures and body activities were measured every 10 min. The first service of artificial insemination used gonadotropin-releasing hormone (GnRH)-based fixed-time artificial insemination protocol in the control and test groups. The test group received artificial insemination based on the estrus prediction made by the biosensor, and the control group received artificial insemination according to visual estrus observation. Before artificial insemination, the ruminoreticular temperature was maintained at an average of 38.95 ± 0.05℃ for 13 h (-21 to -9 h), 0.73℃ higher than the average temperature observed at -48 h (38.22 ± 0.06℃). The body activity, measured using an indwelling 3-axis accelerometer, averaged 1502.57 ± 27.35 for approximately 21 h from -4 to -24 h before artificial insemination, showing 203 indexes higher body activity than -48 hours (1299 ± 9.72). Therefore, using an information and communication techonology (ICT)-based biosensor is highly effective because it can reduce the reproductive cost of a farm by accurately detecting estrus and increasing the rate of estrus confirmation in cattle.