• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.2
• /
• pp.142-151
• /
• 1991

In the present investigation, it has been proposed to utilize a direct contact heat exchanger as an evaporator to solve the difficulties such as scaling, corrosion and law thermal efficiencies, associated with the conventional evaporator. Liquified nitrozen was utilized as a working fluid to investigate basic natures of bubble dynamics in the evaporator, and spray nozzles were adopted to inject liquified nitrozen into the spray column with varying flow rates of dispersed phase fluids. Experimentations were carried out in the range of $6.54{\times}10^{-4}kg/s$ - 0.030 kg/s for dispersed phase flow rates with one, three and five nozzle holes. Observing the bubble dynamics for the evaporator the feasibility of utilizing a direct contact heat exchanger as a LNG evaporator has been evaluated. The results show that no eruption phenomena was observed in the present investigation with $LN_2$ and the interface between $N_2$ bubbles and water was fully turbulent. It is believed that the high injection velocity of $LN_2$ through the spray nozzles provide good mixing effects for both heat and mass transfers between water and $N_2$ bubbles. Ice was formed on the surface of the spray nozzle for higher $LN_2$ flow rates. However, even in this case, it is observed that the ice was detached as soon as it was formed. Under the present experimental conditions, the shapes of $LN_2$ bubbles were in the spherical-cap region according to the Clift, Grace and Weber Graphs. The height of foam region caused by the breakup of larger bubbles keeps increasing with high injection velocities until it reaches it's maximum height.

• Proceedings of the Ginseng society Conference
• /
• 1978.09a
• /
• pp.43-49
• /
• 1978

This study was devised to observe the cytotoxic activity of extracts of Panax ginseng root against some cancer cells and to purify the crude extract. Three kinds of cancer cells(leukemic cells L5178Y, HeLa cells and Sarcoma 180 cells) and mouse embryo cells (as normal cells) were used for this study. The ginseng roots were extracted with petroleum ether in soxhlet apparatus, and the crude extracts were purified by the silicic acid column chromatography and thin-layer chromatography methods. The results obtained are summarized as follows; 1. Eight to ten mg of the petroleum ether extract (crude extract) were obtained from 1 g of Panax ginseng root, and its activities per mg were about 1,000 units. 2. Doubling time of the L5178Y cells was increased to two fold by 24 hours incubation in culture medium containing about one ${\mu}g$ of extract per ml, and eight and ten folds higher concentration of ginseng extract were required for the Sarcoma 180 cells and HeLa cells, respectively, than for the leukemic cells(L5178Y) to inhibit the cellular growth to the same degree. 3. When the L5178Y cells were exposed to medium containing various concentration of the extract for 24 hours before initiation of the soft agar cloning procedure, about $99\%$ of the L5178Y cells were killed at concentration of 8 units per ml. 4. The growth rate of mouse embryo cell (as normal cell) was not affected by the culture with media containing various amounts (1.45 to 30.0 ${\mu}g/ml$) of the extract. 5. The crude extract could be purified about four times by silicic acid column chromatography using several solvent systems, and one spot of active compound could be obtained on the thin-layer chromatogram. 6. In the Swiss mice inoculated with Sarcoma 180 cells, a survival time of the experimental group (injection group of active compound) was extended more. 1.5 to 2.0 times than the control group's(no injection group).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.87-92
• /
• 2008

The breakup processes and spray plume characteristics of liquid jets injected in subsonic air cross-flows were experimentally studied. The behaviors of column, penetration, breakup of plain liquid jet and droplet sizes, velocities have been studied in non-swirling cross-flow of air. Nozzle has a 1.0 mm diameter and Lid ratio=5. Experimental results indicate that the breakup point is delayed by increasing air momentum, the penetration decreases by increasing Weber number and the split angle is increased by increasing air velocity or decreasing injection velocity. SMD increases according as increasing height or decreases in accordance with increasing air velocity. This phenomenon is related to the momentum exchange between column waves and cross-flow stream. Droplet vector velocities were varied from 11.5 to 33 m/s. A higher-velocity region can be identified in down edge region at Z/d=40, 70 and 100. Lower-velocity region were observed on bottom position of the spray plume.

• Korean Journal of Pharmacognosy
• /
• v.47 no.3
• /
• pp.237-245
• /
• 2016

In present study, we conducted quantification analysis of phenolic compound (paeonol), monoterpene glycoside (paeoniflorin), and tannin ((+)-catechin in the 70% ethanol extracts of non-processed Moutan Radicis Cortex (MRC) and processed MRC by roasting using a high-performance liquid chromatography coupled with photodiode array detector. Three marker components were separated on Gemini $C_{18}$ analytical column and the column was maintained at $40^{\circ}C$ using two mobile phase system consisting of 1.0% (v/v) aqueous acetic acid and 1.0% (v/v) acetic acid in acetonitrile. The flow rate and injection volume were 1.0 mL/min and 10 mL. In non-processed MRC sample, the concentrations of three marker compounds, (+)-catechin, paeoniflorin, and paeonol were 0.20, 1.18, and 2.12%, respectively. On the other hand, the concentrations of the three compounds in processed MRC samples were 0.03-0.24, not detected-1.08, and 0.76-1.82%, respectively.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.456-460
• /
• 2005

To enforce the maximum residue limit for residual hexane (0.005 g/kg) in commercially available Korean vegetable oil, convenient and accurate quantification methods were investigated. Using dual surrogate standards, pentane and heptane were dissolved in ethanol, and then added to hexane-tree sunflower oil for setting up the calibration curve. Gas Chromatograph-Flame Ionization Detector with a porous layer open tubular column, indicated good chromatographic separation of hexane from other inhibiting matrix components. The lowest calibration level was $0.5\;{\mu}g/g$, not exceeding a relative standard deviation of 10% (RSD%), and 1.0\;{\mu}g/g$ not exceeding a deviation of 22% RSD% using heptane as an internal standard for the Static headspace analysis by using a headspace auto-sampler and manual injection, respectively. The residual hexane was detected in nine of the samples among 87 vegetable oil samples purchased on the local market.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.803-813
• /
• 2017

This study discussed the possible optimization of enzyme-mediated calcite precipitation (EMCP) as a soil-improvement technique. Magnesium chloride was added to the injection solution to delay the reaction rate and to improve the homogenous distribution of precipitated minerals within soil sample. Soil specimens were prepared in 1-m PVC cylinders and treated with the obtained solutions composed of urease, urea, calcium, and magnesium chloride, and the mineral distribution within the sand specimens was examined. The effects of the precipitated minerals on the mechanical and hydraulic properties were evaluated by unconfined compressive strength (UCS) and permeability tests, respectively. The addition of magnesium was found to be effective in delaying the reaction rate by more than one hour. The uniform distribution of the precipitated minerals within a 1-m sand column was obtained when 0.1 mol/L and 0.4 mol/L of magnesium and calcium, respectively, were injected. The strength increased gradually as the mineral content was further increased. The permeability test results showed that the hydraulic conductivity was approximately constant in the presence of a 6% mineral mass. Thus, it was revealed that it is possible to control the strength of treated sand by adjusting the amount of precipitated minerals.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.7-13
• /
• 2005

In the case of fabricating micro pole structures such as column, square-pole and gear shaft by the micro end-milling process, it can be useful in the fields of industry, for example, micro parts, electrode for electrical discharge machining and micro mold for injection molding. In this study, machining factors and the process were analyzed. Machining experiments of various micro pole configurations were performed. Analysis of the change and effect of the cutting force according to the machining conditions was carried out. An analytical study of the deformation of the micro pole caused cutting conditions and cutting force through the finite element method and ANSYS program was carried out. As a result, this research presented a method of fabricating the column pole of below $100{\mu}m$ diameter with high aspect ratio by using micro end-milling process, and based on that, a method of fabricating a variety of applicable structures. Also the minimum size of the pole capable of fabricating through theory and experiment were demonstrated.

• Natural Product Sciences
• /
• v.5 no.1
• /
• pp.1-6
• /
• 1999

This study was devised to observe the antitumor activity of mugwort (Artemisia princeps Pampan.) against ICR mice inoculated with sarcoma-180 cells. The antitumor compounds were partially purified from petroleum ether extract of mugwort by silicic acid column chromatography. The active fraction used in in vivo test was obtained under the elution with acetone in silicic acid column chromatography. When the acetone fraction was intraperitoneally injected to the mice which had been subcutaneously inoculated on the left groin with sarcoma-180, the growth rate of tumor (sarcoma-180 mass) was inhibited by 30%. In case the acetone fraction was injected to the mice which had been inoculated intraperitoneally with sarcoma-180, the average life span was prolonged by 20%. After the injection of the active fraction, the spleen index and ${\gamma}-globulin$ ratio (%) were increased significantly (p<0.05). The administration of acetone fraction did not cause any abnormality in the body and the homeostasis of mice. Those observations suggest that the acetone fraction of mugwort extract has an antitumor effect in vivo.

• Natural Product Sciences
• /
• v.20 no.3
• /
• pp.182-190
• /
• 2014

An ultra-performance liquid chromatography (UPLC) coupled with electrospray ionization (ESI) tandem mass spectrometry (MS) method was established for quantitative analysis of twelve components, allantoin (1), morroniside (2), 5-hydroxymethyl-2-furfural (5-HMF) (3), loganin (4), coumarin (5), cinnamic acid (6), mesaconitine (7), cinnamaldehyde (8), hypaconitine (9), aconitine (10), alisol B (11), and alisol B acetate (12) in a Palmijihwang-hwan decoction. The twelve constituents were separated on a UPLC BEH C18 column ($2.1{\times}100mm$, $1.7{\mu}m$) at a column temperature of $40^{\circ}C$ by gradient elution with 0.1% (v/v) formic acid in water and acetonitrile as the mobile phase. The flow rate was 0.3 mL/min and the injection volume was $2.0{\mu}L$. Calibration curves of all compounds were acquired with values of the correlation coefficient ${\geq}0.99$ within the test ranges. The limits of detection and quantification for all analytes were 0.01 - 4.53 ng/mL and 0.03 - 13.60 ng/mL, respectively. The concentrations of the compounds 1 - 9 and 12 were 72.83, 4389.00, 4859.00, 3155.17, 223.67, 33.50, 1.97, 518.00, 2.25, and $25.00{\mu}g/g$, respectively. However, compounds 10 and 11 were not detected.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.900-906
• /
• 2004

An RPLC-postcolumn detection method has been developed for the fluorimetric determination of dichloroacetamide (DCAD) in water. After ammonia and DCAD were separated on a $C_{18}$ nonpolar stationary phase with 2.5% methanol-0.02 M phosphate buffer at pH 3, the column eluant was reacted with post column reagents, o-phthaldialdehyde (OPA) and sulfite ion at pH 11.5, to produce a highly fluorescent isoindole fluorophore, which was measured with a fluorescence detector ( ${\lambda}_{ex}$ = 363 nm, ${\lambda}_{em}$ = 425 nm). With the optimized conditions for RPLC and the postcolumn derivatization, the calibration curve was found to be linear in the concentration ranges of 0.5 and 20 ${\mu}$M for DCAD, and the detection limit for DCAD was 0.18 ${\mu}$M (23${\mu}$g/L). This corresponded to 18 pmol per 100 ${\mu}$L injection volume for a signal-to-noise ratio of 3, and the repeatability and reproducibility of this method were 1.0% and 2.5% for five replicate analyzes of 2 ${\mu}$M DCAD, respectively. The degradation yields DCAD to ammonia were 94 and 99%, and the percent recoveries of DCAD from 4 and 6 ${\mu}$M DCAD-spiked tap water were shown mean more than 97%.