• Tribology and Lubricants
• /
• v.22 no.2
• /
• pp.73-78
• /
• 2006

The surface modification of automobile parts is of great technological importance for the improvement of corrosion resistance, wear resistance, fatigue strength and so on. Recently, research on the development of the technology of surface modification substituting 6-balance chrome process has progressively been achieved in automobile parts. Although the innovation technology for the improvement of the corrosion-resisting and wear resistant properties through post oxidation after nitrocarburising process had attracted a great attention. For this, anodically potentiodynamic polarisation testing was carried out to corrosion resistance and friction and wear experiment according to applied load and sliding distance was carried out to evaluate the wear resistance of machine structural steel with nitrocarburising and non-nitrocarburising SM45C. The presumed wear volume was calculated with the image processing far evaluation of wear resistance of two materials. The results show that the nitrocarburising had a distinguished corrosion resistance and wear resistance than non-nitrocarburising.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.387-393
• /
• 2020

Frictional resistance comprises more than 60% of the total resistance for most merchant ships. Active and passive devices have been used to reduce frictional resistance, but the most effective and practical device is an air lubrication system. Such systems have been applied in several ships, and their effects have been verified in sea trials. On the other hand, there are some differences between the results predicted in model tests and those measured in sea trials. In this study, numerical analyses were carried out for a model and a full-scale ship. A new extrapolation method was proposed to improve the estimation of the full-scale resistance of a ship with an air lubrication system. The volume of fluid (VOF) method was considered for the numerical models of the air layer. The numerical method was validated by comparing the experimental data on the air layer pattern and the total resistance.

• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.497-517
• /
• 2015

This study evaluates behavior of the Y-type perfobond rib shear connector proposed by Kim et al. (2013). In addition, an empirical shear resistance formula is developed based on push-out tests. Various types of the proposed Y-type perfobond rib shear connectors are examined to evaluate the effects of design variables such as concrete strength, number of transverse rebars, and thickness of rib. It is verified that higher concrete strength increases shear resistance but decreases ductility. Placing transverse rebars significantly increases both the shear resistance and ductility. As the thickness of the ribs increases, the shear resistance increases but the ductility decreases. The experimental results indicate that a Y-type perfobond rib shear connector has higher shear resistance and ductility than the conventional stud shear connector. The effects of the end bearing resistance, resistance by transverse rebars, concrete dowel resistance by holes, and concrete dowel resistance by Y-shape ribs on the shear resistance are estimated empirically based on the push-out test results and the additional push-out test results by Kim et al. (2013). An empirical shear resistance formula is suggested to estimate the shear resistance of a Y-type perfobond shear connector for design purposes. The newly developed shear resistance formula is in reasonable agreement with the experimental results because the average ratio of measured shear resistance to estimated shear resistance is 1.024.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.169-176
• /
• 2016

In this paper, further research is carried out to investigate the resistance encountered by an icebreaking vessel travelling through level ice and channel ice at low speed range. The present paper focuses on experimental and calculated ice resistances by some empirical formulas in both level ice and channel ice. In order to achieve the research, extra model tests have been done in an ice basin. Based on the measurements from model test, it is found that there exists a relationship between ice resistance, minimum ice load, maximum ice load and the standard deviation of ice load for head on operation in level ice. In addition, both level ice resistance and channel ice resistance are calculated and compared with model test results.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.539-544
• /
• 2007

People tend to resist changing their software even alternatives are better then the current one. This study examines the resistance to change in the use of software from the switching costs perspective based on status quo bias theory. For this study, we select Web Browsers as software. Based on the classification of switching costs into three groups (psychological, procedural, and loss), this study identifies six types of switching costs (uncertainty, commitment, learning, setup, lost performance, and sunk costs). This study tests the effects of six switching costs on user resistance to change based on the survey of 204 web browser users. The results indicate that lost performance costs and emotional costs have significant effects on user resistance to change. This research contributes towards understanding of switching costs and the effects on user resistance to change. This study also offers suggestions to software vendors for retaining their users and to organizations for managing user resistance in switching and adopting software.

• Journal of Information Technology Applications and Management
• /
• v.16 no.2
• /
• pp.65-77
• /
• 2009

This study explores the major factors that are likely to affect the acceptance and resistance of innovative products and services. The TAM (Technology Acceptance Model) has been widely used for understanding consumer acceptance of new technology. This model displays perceived usefulness and perceived ease of use as antecedents of intention to adopt and use. However, research has reported a variety of preceding variables for technology acceptance. In addition, considering paradoxes of technology, research regarding both acceptance and resistance in an integrated model can explain consumer perception and behavior in detail. The results of this study states that relative benefits, degree of innovation in technology, perceived usefulness and perceived ease of use have had positive influence on the intention to adopt but negative impact on that of resistance. However, alterations of usage and perceived risk positively affects resistance, but also have negative effects on the intention to adopt. Finally, intention to adopt has comparatively greater influence than that of resistance on intention to use. Theoretical and managerial implications of the results are also discussed.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.110-118
• /
• 2024

This study examines factors influencing nonusers' resistance to the adoption of the metaverse, focusing on propagation mechanisms. It elucidates the role of innovation resistance within the metaverse adoption process. We applied the Innovation Resistance Model in the context of the metaverse and considers three major groups of factors influencing resistance to the metaverse: innovation characteristics (perceived usefulness, compatibility, perceived risk, and complexity), consumer characteristics (personal innovativeness), and propagation mechanisms (mass media, online media, and personal communication). An online survey of college students who do not use the metaverse revealed that perceived usefulness, compatibility, personal innovativeness, and online media were negative predictors of resistance to the metaverse. Conversely, perceived risk, mass media, and personal communication were positive predictors of resistance to the metaverse. Furthermore, innovation resistance was found to play a mediating role in the metaverse adoption process. Drawing upon the findings, we suggested marketing strategies to decrease resistance to the metaverse.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.3
• /
• pp.258-266
• /
• 2017

Numerical simulations of turbulent two phase flows around KCS have been performed to investigate effects of trim conditions on ship resistance of KCS in short waves by utilizing waves2foam. The wave lengths of LPP/2 and LPP/4 with 1m and 2m wave heights were imposed at inlet boundary. The resistance reduction at 2m trim by head and the increase of resistance at trims by stern were observed regardless of wave lengths and wave heights. The hull pressure on fore-and-aft rather than wave patterns around bulbous bows was mainly responsible for the total resistance coefficients of KCS in short waves. A phase diagram of contribution of hull pressure to the total resistance coefficients disclosed that the phase of representing the maximum resistance in time history played an important role in the effect of trim conditions on ship resistance of KCS in short waves.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.240-245
• /
• 2015

In this study, experiments were performed using a model of a very large crude oil carrier (VLCC), which is a typical blunt ship, in a wave-making towing tank. The aim of the experiments was to determine the effect of added resistance in waves on the various operating conditions of a VLCC. An analysis of the results was conducted to determine the characteristics of resistance performance in waves. In addition, the characteristics of added resistance on a tanker were analyzed under irregular waves based upon the above result. The experimental results showed that added resistance was the highest around ${\lambda}/L=1.0$, and the added resistance increased with the increase of the ship speed. Furthermore, under even keel conditions, the added resistance was higher than that under the trim changes, and the smallest added resistance was measured at the trim by the stern. Based on the experimental results, this study proposes effective operating conditions by analyzing the characteristics of the mean added resistance and the expected extreme response in irregular waves.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2014

PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.