Estimation of Genetic Parameters for Finished and Furlong Times in Thoroughbred Racehorses
-
- Asian-Australasian Journal of Animal Sciences
- /
- v.22 no.12
- /
- pp.1609-1613
- /
- 2009
The objective of this study was to estimate genetic parameters for racing performance traits of thoroughbredracehorses, using a total of 58,124 racing records of 4,200 horses at Gwacheon Racing Park collected from January 2002 to December 2006. This study measured start one furlong time, last three and last one furlong times, and the resulting furlong time averages were 14.2 seconds, 39.9 seconds and 13.9 seconds, respectively. Furlong time means a split time measured based on a 1/8-mile (or approximately 201 m) distance and finished time means total racing time measured from start position to finish line. In the shortest distance races of 1,000 m, the average last three and last one furlong time was fastest at 38.7 seconds and 13.6 seconds, respectively. The correlation between finished time and start one furlong time decreased as the race distance increased, and the same trend was recognized from the correlation between finished time and last three furlong time. In short distance races of 1,400 m or less, the starting ability was found to be an important trait. The average speed was highest at 56 km/h for a 1,000 m race and lowest at 53.2 km/h for a 1,700 m race. Heritabilities of the start one furlong time, the last three and last one furlong time were estimated to be 0.337, 0.245 and 0.210, respectively; and repeatabilities for them were 0.452, 0.353 and 0.309, respectively. Phenotypic and genetic correlations between the start and the last one furlong time were negative at -0.141 and -0.155, respectively.
The conventional fixed gain PI controller is very sensitive to step change of command speed, parameter variation and load disturbances. The precise speed control of interior permanent magnet synchronous motor(IPMSM) drive becomes a complex issue due to nonlinear coupling among its winding currents and the rotor speed as well as the nonlinear electromagnetic developed torque. Therefore, there exists a need to tune the PI controller parameters on-line to ensure optimum drive performance over a wide range of operating conditions. This paper proposes hybrid intelligent-PI(HIPI) controller of IPMSM drive using adaptive learning mechanism(ALM) and fuzzy neural network(FNN). The proposed controller is developed to ensure accurate speed control of IPMSM drive under system disturbances and estimation of speed using artificial neural network(ANN) controller. The PI controller parameters are optimized by ALM-FNN at all possible operating condition in a closed loop vector control scheme, The validity of the proposed controller is verified by results at different dynamic operating conditions.
In this paper, the development of a simulator for the performance estimation and parameter optimization of an integrates voice/data packet communication network is described. The simulator implemented is capable of simulating the integrated voice/data network that handles packet voice terminals as well as data terminals and hosts operating under standard CCITT protocols. Of the three descrete event simulation approaches presently known, the process interaction method has been chose. With this approach one can implement a simulator that is related most Closely with the real system. The simulator has been implemented in PL/I and GPSS simulation languages, resulting in a software package of about 4,000 lines. To reduce the computer run time of the simulator, we have used a method of reducing conditional events based on a GPSS LINK block. We describe various aspects of the simulation model developed. We then investigate the performance of a 7-node network using the simulator, and present the results. For validation of the simulator developed, we construct a simulation model for a simple voice/ data multiplexer, and compare the results of simulation with those of an analytical model.
Records on 546 Korea native pigs for average daily gain (ADG), age at 70 kg (D70 kg) and backfat thickness (BF) made between 2001 and 2006 in herds on National Institutes of Animal Science in Korea were used to estimate genetic parameters. The data was analyzed by the DF-REML (Derivative-Free Restricted Maximum Likelihood) program of Boldman using a single-trait animal model. Heritabilities were 0.26, 0.09, and 0.29 for ADG, D70 kg and BF, respectively. The phenotypic correlations of ADG with D70 kg and BF were -0.71 and 0.30. The phenotypic correlation of D70 kg with BF was -0.15. The genetic correlations of ADG with D70 kg and BF were -0.11, 0.41, respectively. The genetic correlation of D70 kg with BF was -0.16. The data of weights and measurements on body length, body height and chest width after age at 11 months (days to 330) were shown scarcely less differences compare to data of age at 11 months.
This study was conducted to investigate the genetic relationships among four reproductive traits. Data for this study were 7616 records from 1910 Landrace (L) and 10,454 records from 2283 Yorkshire (Y) in a closed nucleus swine herd. Traits considered on this study were gestation length (GL), total number of piglets born (TNB), wean to first service (WFS), and number of stillborn per litter (NSB). Heritabilities and genetic correlations were estimated by using the Bayesian inferences via Gibbs sampling in a four trait linear-threshold repeatability animal mixed model by designating NSB as a categorical trait in the L and Y purebred populations. Effects on the statistical model were considered for parity, contemporary group as fixed and service sire, permanent environmental, animal additive genetic effects as random. Estimates of heritability were 0.21, 0.23, 0.16, and 0.09 for GL, WFS, TNB, and NSB in the L population and 0.35, 0.16, 0.14 and 0.10 for corresponding traits in the Y population, respectively. Genetic correlation for GL was -0.59 and -0.28 with TNB and -0.58 and -0.17 with NSB in the L and Y populations, respectively. The NSB was positively correlated with TNB in the L and Y populations in genetic and environmental aspects. Therefore, the NSB should be taken into account in selecting sows for improving prolificacy of dam line breeding swine stock.
One approach to improved image restoration methods has been the incorporation of additional source information via Gibbs priors that assume a source that is piecewise smooth. A natural Gibbs prior for expressing such constraints is an energy function defined on binary valued line processes as well as source intensities. However, the estimation of both continuous variables and binary variables is known to be a difficult problem. In this work, we consider the application of the deterministic annealing method. Unlike other methods, the deterministic annealing method offers a principled and efficient means of handling the problems associated with mixed continuous and binary variable objectives. The application of the deterministic annealing method results in a sequence of objective functions (defined only on the continuous variables) whose sequence of solutions approaches that of the original mixed variable objective function. The sequence is indexed by a control parameter (the temperature). The energy functions at high temperatures are smooth approximations of the energy functions at lower temperatures. Consequently, it is easier to minimize the energy functions at high temperatures and then track the minimum through the variation of the temperature. This is the essence of a continuation method. We show experimental results, which demonstrate the efficacy of the continuation method applied to a Bayesian restoration model.
Objective: This study was conducted to estimate the genetic parameters and breeding values of breast meat related traits of Pekin ducks. Selection response was also determined by using ultrasound breast muscle thickness (BMT) measurements in combination with bosom breadth (BB) and keel length (KL) values. Methods: The traits analyzed were breast meat weight (BMW), body weight (BW), breast meat percentage (BMP) and the three parameters of breast meat (BB, KL, and BMT). These measurements were derived from studying 15,781 Pekin ducks selected from 10 generations based on breast meat weight. Genetic parameters and breeding value were estimated for the analysis of the breeding process. Results: Estimated heritability of BMW and BMP were moderate (0.23 and 0.16, respectively), and heritability of BW was high (0.48). Other traits such as BB, KL, and BMT indicated moderate heritability ranging between 0.11 and 0.28. Significant phenotypic correlations of BMW with BW and BMP were discovered (p<0.05), and genetic correlations of BMW with BW and BMP were positive and high (0.83 and 0.66, respectively). It was noted that BMW had positive correlations with all the other traits. Generational average estimated breeding values of all traits increased substantially over the course of selection, which demonstrated that the ducks responded efficiently to increased breast meat yield after 10 generations of breeding. Conclusion: The results indicated that duck BMW had the potential to be increased through genetic selection with positive effects on BW and BMP. The ultrasound BMT, in combination with the measurement of BB and KL, is shown to be essential and effective in the process of high breast meat yield duck breeding.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70