• Physical Therapy Rehabilitation Science
• /
• 제5권3호
• /
• pp.143-148
• /
• 2016

Objective: This study aimed to quantify one of the useful upper extremity movements to evaluate motor control abilities between the groups of people with mild and moderate arm impairments performing a door handling task. Design: Cross-sectional study. Methods: Twenty-one healthy participants and twenty-one persons with chronic stroke (9 mild stroke and 12 moderate stroke) were recruited for this study. Stroke participants were divided into 2 groups based on Fugle-Meyer Assessment scores of 58-65 (mild arm) and 38-57 (moderate arm). All they performed door handling task including the pronation and supination phases 3 times. We measured some movement factors which were reaction time, movement time, hand of peak velocity, hand of movement units to perform door handling task using the three-dimensional motion analysis. Results: The majority of kinematic variables showed significant differences among study groups (p<0.05). The reaction time, total and phase of movement time, hand of peak velocity, the number of movement units discriminated between healthy participants and persons with moderate upper limb stroke (p<0.05). In addition, reaction time, total and phase of movement time, the number of movement units discriminated between those with moderate and mild upper limbs of stroke patients (p<0.05). Conclusions: Three-dimensional kinematic motion analysis in this study was a useful tool for assessing the upper extremity function in different subgroups of people with stroke during the door handling task. These kinematic variables may help clinicians understand the arm movements in door handling task and consist of discriminative therapeutic interventions for stroke patients on upper extremity rehabilitation.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.176-183
• /
• 2001

It is difficult to find out the kinematic characteristics of a vehicle suspension without the usage of CAE software. The application of CAE software into suspension kinematics and dynamics yields the more precise knowledge on the chassis design. In this study, the influence of the suspension geometry on the handling performances of a large-sized bus is investigated using the DADS software. The front and rear suspension of a large-sized bus are a rigid axle suspension with the four control links. The elastokinematic analysis is performed to evaluate the roll characteristics of the front and rear suspension. The elastokinematic responses are evaluated in terms of the roll center height and roll steer for various geometric parameters. The roll center height is mainly dependent on the vertical displacement of a panhard rod and the vertical displacements of lower control links affect the roll steer of a rear suspension. The parameter study with the change of rear suspension geometry is conducted to investigate the vehicle handling performances. This parameter study shows that the vertical displacement and orientation of a panhard rod influence the handling performances of a large-sized bus significantly.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.364-367
• /
• 2004

This paper presents the flight software of KoDSat (KSLV-l Demonstration Satellite) which performs demonstrating the KSLV-l (Korea Space Launch Vehicle-l)'s satellite launch capability. The KoDSat Flight Software executes in a single-processor, multi-function flight computer on the spacecraft, the OBC (On Board Computer). The flight software running on the single processor is responsible for all real-time processing associated with: processor startup and hardware initialization, task scheduling, RS422 handling function, command and data handling including uplink command and down-link telemetry, attitude determination and control, battery state of charge monitoring and control, thermal control processing.

• 한국시뮬레이션학회논문지
• /
• 제11권4호
• /
• pp.81-89
• /
• 2002

Several full mission simulators have been installed since about 10 years ago in Korea. The newly established Marine Simulation Training and Research Center at Korea Maritime University has played a key role for education and training of both cadets and in-service officers trainees, and for research on Korea ports such as Jeju international cruise port, Ulsan SBM and Kwangyang container port and many others. This study mainly focuses maritime education and training on the ship handling simulation and the bridge resource management conducted by Korea Maritime University.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.85-93
• /
• 2005

평택항은 2001년 ‘평택항 종합개발 기간계획 정비용역’ 에서 선박의 내항 이용 방법이 갑문식에서 감조식으로 변경됨에 따라 기 건설된 서해대교 입구의 남측호안을 철거하여 선박이 상시 내항을 이용할 수 있도록 계획중이다. 이에 이 연구에서는 남측호안이 철거된 후 평택항을 고려하여 서해대교 하부를 통항하여 내항에 안전하게 입출항이 가능한지를 이론적 고찰 및 풀미션시뮬레이터를 이용하여 평가하고 문제점 발생시 대안을 제시한다.

• 종양간호연구
• /
• 제4권2호
• /
• pp.154-165
• /
• 2004

Purpose : To provide basic data for establishing the policy of safe handling of cytotoxic drugs and for building training materials and clinical guidelines for nurses handling cytotoxic drugs. Methods: 255 nurses in Seoul and 257 nurses in D metropolitan area participated in the study. Questionnaires were based on the safe handling guideline for cytotoxic drugs issued by OSHA and ONA. Results: Nurses in Seoul scored higher in the cognition for safe handling guidelines of cytotoxic drugs in preparation, administration. as well as total score compared with nurses in D metropolitan area. The practical score also showed higher in nurses in Seoul in administration, disposal and total score. But both groups showed low level of practical score. The answers why they could not follow the guideline for cytotoxic drugs were "don't have", "busy", and "don't know", etc Conclusion: Handling of the cytotoxic drug is very common and important. The study findings suggest that hospitals especially in D metropolitan area should educate the nurses and supply equipments for safe handling of cytotoxic drugs. Thus, repetitive and continual education of all nurses including experts is needed. In addition, it is necessary to supply enough protective equipment for preventing exposure to the cytotoxic drugs.

• 오토저널
• /
• 제12권3호
• /
• pp.21-29
• /
• 1990

Equipments of passenger cars with modern technologies are gaining their importance. Related with such developments, the four-wheel steering system (4WS) was introduced recently to a few passenger cars in the market. The most important research goal on this new steering system is improvement of active safety, in other words, improvement of handling characteristics of vehicle stability and maneuverability. This paper presents a computer-based study about the effects of 4WS system on the vehicle handling characteristics. A simple bicycle model of 2 d.o.f. is used for the development of four wheel control algorithms of 4WS system, and the rear wheel control strategies are applied to a complex vehicle model of 16 d.o.f. for simulation of selected ISO-driving tests. The 4WS systems, which reduce the sideslip angle at the mass center of vehicle to almost zero, show much improved handling characteristics compared to that of the conventional 2WS system. These 4WS systems, however, result in vehicles with eigen-steer characteristics of extreme understeer behaviour.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.661-667
• /
• 2003

There are certain guidelines on the channel design such as domestic guidelines（Korean and japanese, etc.）and international guideline known as PIANC Rules（Permanent International Association of Navigation Congresses Rules）, in the world These rules have considered many factors such as natural conditions, ship maneuverability and geographical features etc. But it is contented toot the area of these rules toot are meant to facilitate the ease of ship-handling is insufficient. To satisfy this point in design process, it is necessary to take into account the difficulties encountered in ship-handling within these inland waterways. Because many vessels are navigating at the same time within these waterways, the specific navigable traffic volume should be considered with regard to the standard process of route designing. It must also be considered with regard to the volume of navigable traffic bemuse of ship-handling difficulty toot arises within the same waterway with varying amounts of traffic volume because toot ship-handling/manueverability is directly influenced by these factors. This paper aims to propose a new approach to the design of standard inland water route considering the traffic volume and the shape of waterway. Also consider the relationship among these factors may affect to the ship-handling difficulties.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.186-193
• /
• 2014

On-center handling feel indices are the important numerical factors that meaning performance of manuability and stability felt by drivers. They should be considered to suspension design. The major factor that affect to these indices is the shape of assist torque curve. This paper presents the variables that meaning the shape of the assist torque curve and analyze the effect of each variables. And using interaction formulas, it is proposed that the method to extract the variables that satisfy the goal indices. The result of simulation that applied assist torque curve extracted by the method demonstrate the capability of this method with error under 8%.