• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1597-1610
• /
• 2005

The conventional computerized numerical controller (CNC) of machine tools has been increasingly replaced by a PC-based open architecture CNC (OAC) that is independent of a CNC vendor. The OAC and machine tools with an OAC have led to a convenient environment in which user-defined applications can be efficiently implemented within a CNC. This paper proposes a method of diagnosing the cause of operational faults. The method is based on the status of a programmable logic controller in machine tools with an OAC. An operational fault is defined as a disability that occurs during the normal operation of machine tools. Operational faults constitute more than 70 percent of all faults and are also unpredictable because most of them occur without any warning. To quickly and correctly diagnose the cause of an operational fault, two diagnostic models are proposed: the switching function and the step switching function. The cause of the fault is logically diagnosed through a fault diagnosis system using diagnostic models. A suitable interface environment between a CNC and developed application modules is constructed to implement the diagnostic functions in the CNC domain. The results of the diagnosis were displayed on a CNC monitor for machine operators and transmitted to a remote site through a Web browser. The proposed diagnostic method and its results were useful to unskilled machine operators and reduced the machine downtime.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.305-325
• /
• 2014

In cloud computing infrastructure, current virtual machine trust measurement methods have many shortcomings in dynamism, security and concurrency. In this paper, we present a new method to measure the trust of virtual machine. Firstly, we propose "behavior trace" to describe the state of virtual machine. Behavior trace is a sequence of behaviors. The measurement of behavior trace is conducted on the basis of anticipated trusted behavior, which not only ensures security of the virtual machine during runtime stage but also reduces complexity of the trust measurement. Based on the behavior trace, we present a Dynamic Tree Style Trust Measurement Model (DTSTM). In this model, the measurement of system domain and user domain is separated, which enhances the extensibility, security and concurrency of the measurement. Finally, based on System Call Interceptor (SCI) and Virtual Machine Introspection (VMI) technology, we implement a DTSTM prototype system for virtual machine trust measurement. Experimental results demonstrate that the system can effectively verify the trust of virtual machine and requires a relatively low performance overhead.

• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.37-44
• /
• 1998

The purpose of this study was to elucidate the effect of weight loss of polyethylene terephthalate(PET) fabrics on the mechanical properties such as bending and shear. In order to compare the effect of treatment machine on the mechanical properies of treated PET fabrics, PET fabrics were hydrolyzed with NaOH aqueous solution using Tank machine and Liquor flow machine, respectively. The results were as follows ： 1. The bending rigidity and shear stiffness of hydrolyzed PET fabric decreased markedly up to about 10％ weight loss regardless of treatment machines. At the above 10％ weight loss, the variation of these properties is nearly unchanged. In addition, the bending hysteresis and shear hysteresis also showed similar trend. 2. Weft density change of PET fabrics treated with Liquor flow machine decreased by 1pick/inch. It is assumed that this is attributed to the tension during the treatment of Liquor flow machine. On the other hand, the weft density change of PET fabrics treated with Tank machine is scarcely influeneced by the weight loss. While warp density of PET fabrics treated with Liquor flow machine had no change with weight loss, warp density of PET fabrics treated with Tank machine decreased by 6pick/inch due to the tension. 3. The bending rigidity and shear stiffness of PET fabrics hydrolyzed with liquor flow machine slightly higher than with Tank m/c at the above 10％ weight loss. It is assumed that this is caused by the increasement of the crossing pressure of warp and weft yarn and contact points of filaments in the yarns. Also, the bending and shear hysteresis of PET fabrics treated with Tank machine were higher than that of liquor flow machine.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.865-867
• /
• 2014

IoT is a kind of business means to maintain the scenario in aware of the situation with the user's through collaboration for M2M have intelligence to each appliance is of machine socializations. The existing IoT Progress from one situation one control of through a simple sensor data, mean from machine socialization is regulate and control on overall the flow of machine manager to solved a scenarios as the situation. In this paper, suggest schema for to apply the M2M of SNS of existing H2H, suggest is schema in information each appliance in solve scenario for machine manager.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.357-360
• /
• 2011

Machine tools of Gantry type have been performing machine work as a moving machinery. In a large machine tools, the machinery is moving with bed and it is structurally unstable. When the objects are processed, machine tools gets loads in the direction of Z-axis. In other words, the machine tools which become bigger was performed by the trend of complexation. It made that the increased machine weight can't be passed over. In order to enhance manufacturing precision, it needs to compensate Z-axis deflection of weight for machine tools. In this paper, Machine tools of Gantry type were miniaturized and deflection was measured by LVDT sensors. When deflection was measured, block mass weighted 50kg is moving on particular distance. Then, the displacement of fixed point and moving point is measured by recording telemeter.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.127-132
• /
• 2006

The present study deals with polishing machining of diamond for jewelry using developed automatic polishing machine that can cut diamond to have 58 facets in a brilliant cutting which has been hardly achieved by a conventional manually operating polishing machine. Upon the 3-dimensional Sarin M/C test and analysis on the machined diamond by the developed automatic polishing machine its proportion and finishing turned out to be better than the machined diamond by the conventional manually operating polishing machine.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.77-84
• /
• 2003

The properties of a machine tool greatly affect machining quality since a machine tool has large variance in its features. Machine tool makers want to find best machining condition with the one that they have built. Machine builders need to develop test specimen since it helps finding characteristics of machine tools when the machining properties of the specimen are analyzed. This paper develops test specimen to identify features of the main spindle, the feeding device, and the frame of a machine tool. The specimen is machined with a high speed machine and the features of the machine are analyzed with test items. They are surface roughness, overshoot in axial movement, errors in circular movement, feeding with small movement and compensational error. This work can improve usability for a machine tool in machining practice.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.4
• /
• pp.847-857
• /
• 2007

This paper provides a statistical algorithm which detects COD (chemical oxygen demand) measurement machine error on real-time. For this we propose to use regression model fitting and check its validity against the current observations. The main idea is that the normal regression relation between COD measurement and other parameters inside the machine will be violated when the machine is out of order.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1596-1603
• /
• 2018

This paper presents the new design and validation process of the linear transverse flux machine of the stelzer machine for hybrid vehicle application. A linear transverse flux machine is a novel electric machine that has higher force density and power than conventional electric machine. The process concentrates on 2-dimensional and 3-dimensional analysis using equivalent magnetic circuit method considering leakage elements and it is verified by finite element analysis. Besides the force characteristics of all axis of each direction are analyzed. The study is considered by dividing the transverse flux electric excited type and the transverse flux permanent magnet excited type. Additionally three-dimensional analysis in this machine is accomplished due to asymmetric structure with another three axes. Finally, it suggests the new design and validation process of linear transverse flux machine for stelzer machine.