• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.102-108
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for NOx controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2$, NOx and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective back-pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing NOx emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.119-133
• /
• 1998

To implement full automation in pipe welding, it si most important to develop special sensors and their related systems which act like human operator when detecting irregular groove conditions. In this study, an automatic pipe Gas Metal Arc Welding (GMAW) system was proposed to full control pipe welding procedure with intelligent sensor systems. A five-axes manipulator was proposed for welding torch to automatically access to exact welding position when pipe size and welding angle were given. Pool status and torch position were measured by using a weld-pool image monitoring and processing technique in root-pass welding for weld seam tracking and weld pool control. To overcome the intensive arc light, pool image was captured at the instance of short circuit of welding power loop. Captured image was processed to determine weld pool shape. For weld seam tracking, the relative distance of a torch position from the pool center was calculated in the extracted pool shape to move torch just onto the groove center. To control penetration of root pas, gap was calculated in the extracted pool image, and then weld conditions were controlled for obtaining appropriate penetration. welding speed was determined with a fuzzy logic, and welding current and voltage were determined from a data base to correspond to the gap. For automatic fill-pass welding, the function of human operator of real time weld seam control can be substituted by a sensor system. In this study, an arc sensor system was proposed based on a fuzzy control logic. Using the proposed automatic system, root-pass welding of pipe which had gap variation was assured to be appropriately controlled in welding conditions and in torch position by showing sound welding result and good seam tracking capability. Fill-pass welding by the proposed system also showed very successful result by tracking along the offset welding line without any control of human operator.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.45-52
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 한국수산과학회지
• /
• 제49권3호
• /
• pp.367-375
• /
• 2016

Marbled flounder Pseudopleuronectes yokohamae is a commercially important flatfish in the coastal waters of the East Sea off Pohang, Korea. Maturity and spawning dynamics of P. yokohamae were investigated based on samples collected by gill net and long line in the coastal waters off Pohang from January 2013 to December 2014. We analyzed monthly changes in maturity stage, gonadosomatic index (GSI), egg diameter, fecundity, and total length at 50% group maturity. We found that the spawning period was December to February, wherein fecundity ranged from 55,760 eggs at 20.40 cm total length (TL) to 1,559,007 eggs at 46.6 cm TL. The relationship between TL and fecundity (F) was F = 0.0017 TL^3.5604 (R² = 0.6984), and F increased with increasing TL. We estimated the TL at 50% group maturity as 27.4 cm for female and 23.5 cm for male P. yokohamae, respectively. The results from this research will aid in the development of policies on season and minimum catch length for sustainable production of P. yokohamae. We propose that it is necessary to conduct long-term ecological monitoring for this species because biological properties such as spawning ecology and growth performance are being affected by climate change.

• 화약ㆍ발파
• /
• 제17권1호
• /
• pp.27-55
• /
• 1999

The excavation works for deep foundation in urban areas have recently increased complaints of blasting vibration and settlement of ground level. Foundation must be excavated approximately up to 24-28m depths from the surface. The roads and subway line pass through the excavation area. The Dae-chung station is also located at the nearest distance 5-35m from the working site. To protect subway station and adjacient some structures from blasting and settlement, the level of ground vibration, displacements and stress were monitored and analyzed. The results can be summarized as follows ; 1. An empirical particle velocity equation were obtained by test blasts at Nassan Missi 860 Office tel construction site. $V{\;}={\;}K(D/\sqrt{W})^{-n}$, where the values for n and k are estimated tobe 0.371 and 1.551. From this ground vibration equation, the max. charge weight per delay time against distance from blasting point is calculated. Detailed blasting method is also presented. 2. To measure the horizontal displacement in directions perpendicular to the borehole axis, 6 inclinometers installed around working sites. The displacement at the begining was comparatively high because the installation of struts was delayed, but after its installation the values showed a stable trend. Among them, the displacement by 3 inclinometers installed on a temporary parking area showed comparatively high values, for example, the displacement measured at hole No. IC-l recoded the max. 47.04mm for 6 months and at hole No. IC-2 recorded the max. 57.33mm for 7 months. So, all of these data was estimated below a safe standard value 103mm. 3. Seven strain gauge meter was installed of measure the magnitude and change of stress acted on structs. The measured value of maximum stress was $-465{\;}kgf/\textrm{cm}^2,{\;}-338.4{\;}kgf/\textrm{cm}^2,{\;}302.3{\;}kgf/\textrm{cm}^2$ respectively. In compareto the allowable stress level of steel, they are estimated to be safe.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.1-5
• /
• 2010

음향방출법은 압력용기 구조에서 존재하는 결함이나 누출을 탐지하거나 모니터링하는데 유용한 도구로 부상하였다. 본 연구에서는 브레그 격자에 근거한 음향방출센서 시스템이 개발되었다. 다양한 길이의 센싱부를 포함하는 다양한 형태의 광섬유 브레그 격자센서가 제작되었고 PZT 펄서와 연필심 파괴를 이용하여 시험되었다. 두 가지 형태의 센서부착법이 사용되었다. 첫째는 광섬유 브레그 격자센서가 접착제를 이용하여 표면에 완전히 부착되는 방법이고 둘째는 센서의 한쪽 부분만 표면에 부분적으로 고정하고 다른 쪽은 외팔보와 같이 작동하도록 하는 방법이다. 이렇게 함으로써 센싱부의 길이에 비례하는 고유진동수를 갖는 광섬유 브레그 격자센서를 구성할 수 있다. 본 연구에 사용된 센서 시스템의 최종 목적은 원자력발전소 상부 관통관의 균열이나 누출을 탐지하는 온라인 모니터링 시스템에 사용하는 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.436-437
• /
• 2012

Double patterning technology (DPT) has been suggested as a promising candidates of the next generation lithography technology in FLASH and DRAM manufacturing in sub-40nm technology node. DPT enables to overcome the physical limitation of optical lithography, and it is expected to be continued as long as e-beam lithography takes place in manufacturing. Several different processes for DPT are currently available in practice, and they are litho-litho-etch (LLE), litho-etch-litho-etch (LELE), litho-freeze-litho-etch (LFLE), and self-aligned double patterning (SADP) [1]. The self-aligned approach is regarded as more suitable for mass production, but it requires precise control of sidewall space etch profile for the exact definition of hard mask layer. In this paper, we propose etch end point detection (EPD) in spacer etching to precisely control sidewall profile in SADP. Conventional etch EPD notify the end point after or on-set of a layer being etched is removed, but the EPD in spacer etch should land-off exactly after surface removal while the spacer is still remained. Precise control of real-time in-situ EPD may help to control the size of spacer to realize desired pattern geometry. To demonstrate the capability of spacer-etch EPD, we fabricated metal line structure on silicon dioxide layer and spacer deposition layer with silicon nitride. While blanket etch of the spacer layer takes place in inductively coupled plasma-reactive ion etching (ICP-RIE), in-situ monitoring of plasma chemistry is performed using optical emission spectroscopy (OES), and the acquired data is stored in a local computer. Through offline analysis of the acquired OES data with respect to etch gas and by-product chemistry, a representative EPD time traces signal is derived. We found that the SE-EPD is useful for precise control of spacer etching in DPT, and we are continuously developing real-time SE-EPD methodology employing cumulative sum (CUSUM) control chart [2].

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.54-60
• /
• 2006

In this paper, we describe a bio-fluidic device for adaptive sample pretreatment, in order to optimize the conditions under which absorbance assays can be conducted. This device can be successfully applied to the measurement of Escherichia coli (E. coli) concentrations using adaptive dilution, with which the dilution ratio can be adjusted during the dilution. Although many attempts have been previously made to miniaturize complex biochemical analyses at the chip scale, very few sample pretreatment processes have actually been miniaturized or automated at this point. Due to the lack of currently available on-chip pretreatments, analytical instruments tend to suffer from a limited range of analysis. This occasionally hinders the direct and quantitative analysis of specific analyses obtained from real samples. In order to overcome these issues, we exploit two novel strategies: dilution with a programmable ratio, and to-and-fro mixing. The bio-fluidic device consists of a rectangular chamber constructed of poly(dimethylsiloxane) (PDMS). This chamber has four openings, an inlet, an outlet, an air control, and an air vent. Each of the dilution cycles is comprised of four steps: detection, liquid drain, buffer injection, and to-and-fro mixing. When using adaptive sample pretreatment, the range in which E. coli concentrations can be measured is broadened, to an optical density (O.D.) range of $0.3{\sim}30$. This device may prove useful in the on-line monitoring of cell concentrations, in both fermenter and aqueous environments.

• Archives of Pharmacal Research
• /
• 제29권1호
• /
• pp.80-87
• /
• 2006

Leukemias are common worldwide. Wilms'tumor1 (WT1) protein is highly expressed in leukemic blast cells of myeloid and lymphoid origin. Thus, WT1 mRNA serves as a tumor marker for leukemias detection and monitoring disease progression. Curcumin is well known for its anticancer property. The objective of this study was to investigate the effect of curcumin on WT1 gene expression in patient leukemic cells. The leukemic cells were collected from 70 childhood leukemia patients admitted at Maharaj Nakorn Chiang Mai Hospital, Chiang Mai, Thailand, in the period July 2003 to February 2005. There were 58 cases of acute lymphoblastic leukemia (ALL), 10 cases of acute myeloblastic leukemia (AML), and 2 cases of chronic myelocytic leukemia (CML). There were 41 males and 29 females ranging from 1 to 15 years old. Leukemic cells were cultured in the presence or absence of 10 mM curcumin for 48 h. WT1 mRNA levels were determined by RT-PCR. The result showed that curcumin reduced WT1 gene expression in the cells from 35 patients (50%). It affected the WT1 gene expression in 4 of 8 relapsed cases (50%), 12 of 24 cases of drug maintenance (50%), 7 of 16 cases of completed treatment (44%), and 12 of 22 cases of new patients (54%). The basal expression levels of WT1 gene in leukemic patient cells as compared to that of K562 cells were classified as low level (1-20%) in 6 of 20 cases (30%), medium level (21-60%) in 12 of 21 cases (57%), and high level (61-100%) in 17 of 23 cases (74%). In summary, curcumin decreased WT1 mRNA in patient leukemic cells. Thus, curcumin treatment may provide a lead for clinical treatment in leukemic patients in the future.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.70-76
• /
• 2015

본 논문은 FPGA 내부의 경계 스캔 체인을 자가 테스트 회로로써 재활용하기 위한 FPGA 자가 테스트 회로 설계 기술을 소개한다. FPGA의 경계 스캔 체인은 테스트나 디버깅 기능뿐만 아니라 각 셀에 연결되어 있는 입출력 핀의 기능을 설정하기 위해서도 사용되기 때문에 일반적인 칩의 경계 스캔 셀보다 매우 크다. 따라서, 본 논문에서는 FPGA 경계 스캔 셀의 구조를 분석하고 소수의 FPGA 로직과 함께 테스트 패턴 생성과 결과 분석이 가능하도록 설계한 BIST(built-in-self-test) 회로를 제시한다. FPGA의 경계 스캔 체인을 자가 테스트를 위하여 재사용함으로써 면적 오버헤드를 줄일 수 있고 보드상에서 프로세서를 사용한 온-라인(on-line) 테스트/모니터링도 가능하다. 실험을 통하여 오버헤드 증가량과 시뮬레이션 결과를 제시한다.