• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.69-78
• /
• 2022

Geotextile tubes are widely used to prevent erosion in coastal areas and to replace the backfill for shore slopes in the reclamation of land using dredged soil. In this study, The triaxial confining pressures were chosen as 10kPa, 50kPa, or 100kPa for the specimens reinforced with geotextile considering the condition in the site. The strain behavior under various compressive stresses was then identified. At strains 0% to 7%, the stress-strain behavior was the same due to the effect of initial strain hardening, in which the force was exerted according to the relaxation of the geotextile regardless of the confining pressure (≤100kPa). At strains of 7% or more, the specimen with the small confining pressure had smaller deformation under load, which increases the tensile resistance provided by the reinforcing geotextile. Brittle fracture was then observed due to strain softening and the deviator stress abruptly decreased. This is different from the phenomenon in which the shear strength increases as the confining pressure increases in general triaxial compression tests. In the geoxtile-confined tests, geotextiles are primarily subjected to tensile displacement. Thereafter, the modulus of elasticity increases rapidly, which exhibits the elastic behavior of the geotextile.

• Clean Technology
• /
• v.28 no.4
• /
• pp.278-284
• /
• 2022

This study presents an excellent planar heater based on low-dimensional composites. By optimizing the ratio of 1D carbon nanotubes (CNT) and 2D MXene (Ti₃C₂T_X), it is possible to create a planar heater that has superior electrical conductivity and high heat generation characteristics. Low-dimensional composites were prepared by mixing CNT paste and MXene solution with eco-friendly waterborne polyurethane (WPU). In order to find the optimal mixing ratio for the MXene-CNT-WPU composites, samples with MXene to CNT weight ratios of 3:1, 1:1, 1:3, 1:7, and 1:14 were investigated. In addition to these different weight ratios, 5 wt% WPU was equally applied to each sample. It was confirmed that the higher the weight ratio of CNT, the lower the sheet resistance and the higher the heating temperature. In particular, when the MXene-CNT-WPU planar heater was fabricated by mixing MXene and CNT at a weight ratio of 1:7 and 1:14, the heating temperature was higher than the heating temperature of a CNT-WPU planar heater. These characteristics are due to the optimized mixture of the 1D materials (CNT) and the 2D materials (MXene) causing the formation of a flat surface and a dense network structure. The low-dimensional composites manufactured with the optimized mixing ratios found in this study are expected to be applied in flexible electronic devices.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.36-44
• /
• 2023

Core-shell TiO₂/Ag nanoparticles were synthesized by a modified sol-gel process and the reverse micelle method using acetoxime as a reducing agent in water/dodecylbenzenesulfonic acid (DDBA)/cyclohexane. The structure, shape, and size of the TiO₂/Ag nanoparticles were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The size of TiO₂/Ag nanoparticles could be controlled by changing the [water]/[DDBA] molar ratio values. The size and the polydispersity of TiO₂/Ag nanoparticles increased when the [water]/[DDBA] molar ratio rose. The resultant Ag nanoparticles over the anatase crystal TiO₂ nanoparticles exhibited a strong surface plasmon resonance (SPR) peak at about 430 nm. The SPR peak shifted to the red side with the increase in nanoparticle size. Conductive pastes with 70 wt% TiO₂/Ag nanoparticles were prepared, and the pastes were coated on the PET films using a screen-printing method. The printed paste films of the TiO₂/Ag nanoparticles demonstrated greater surface resistance than conventional Ag paste in the range of 405~630 μΩ/sq.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.5-17
• /
• 2022

A pile is a type of medium for constructing superstructures in weak geotechnical conditions. A pretensioned spun high-strength concrete (PHC) pile is composed of high-strength concrete with a specified strength greater than 80 MPa. Therefore, it has advantages in resistance to axial and bending moments and quality control and management since it is manufactured in a factory. However, the skin friction of a pile, which accounts for a large portion of the pile bearing capacity, is only approximated using empirical equations or standard penetration test (SPT) N-values. Particularly, there are some poor research results on the pile-soil interface under the seismic loads in Korea. Additionally, some studies do not consider geoenvironmental elements, such as groundwater pH values. This study performs sets of cyclic simple shear tests using submerged concrete specimens for 1 month to consider pH values of groundwater and clay specimens composed of kaolinite to generate a pile-soil interface. 0.2 and 0.4 MPa of normal stress conditions are considered in the case of pH values. The disturbed state concept is employed to express the dynamic behavior of the interface, and the disturbed function parameters are newly suggested. Consequently, the largest disturbance increase under basic conditions is observed, and an early approach to the failure under low normal stress conditions is presented. The disturbance function parameters are also suggested to express this disposition quantitatively.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.85-89
• /
• 2021

AlGaN-based UV-C light-emitting diodes (LEDs) were applied for p-type activation by electrochemical potentiostatic activation (EPA). The p-type activation efficiency was increased by removing hydrogen atoms through EPA treatment using a neutral Mg-H complex that causes high resistance and low conductivity. A neutral Mg-H complex is decomposed into Mg^- and H⁺ depending on the key parameters of solution, voltage, and time. The improved hole carrier concentration was confirmed by secondary ion mass spectroscopy (SIMS) analysis. This mechanism eventually improved the internal quantum efficiency (IQE), the light extraction efficiency, the leakage current value in the reverse current region, and junction temperature, resulting in better UV-C LED lifetime. For systematic analysis, SIMS, Etamax IQE system, integrating sphere, and current-voltage measurement system were used, and the results were compared with the existing N₂-annealing method.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.956-961
• /
• 2022

Plant Chloroplast have several advantages as an expression platform of biopharmaceuticals over conventional expression platforms such as mammalian cells, yeast and bacteria. First, plants do not serve as a host for mammalian infectious virus and have endotoxin like bacteria which can cause anaphylactic shock. In addition, high copy number of chloroplast genome allows for chloroplast transformants to reach the high level of expression of heterologous genes. Moreover, the integration of transgenes into specific region of chloroplast genomes makes chloroplast transformants unaffected by positional effect which can be frequently observed from nuclear transformants, resulting in loss of transgene expressions. Antimicrobial peptides (AMPs) are a kind of innate immunity which is found from bacteria to humans. Unlike conventional antibiotics, very less dosage of AMPs can have catastrophic effect on bacterial survival. Further, the repeated use of AMPs does not trigger the development of bacterial resistance. Moricin, one of the AMPs, was isolated from Bombyx mori, a silkworm moth. The C-terminal of moricin consists largely of basic amino acids, and the N-terminal has an α-helix structure. Moricin was chosen and expressed in a SUMO/SUMOase without leaving any unwanted amino acids which could potentially affect the anti-bacterial activity of the moricin. The transformation vector used in this study has already been created in this lab for the expression in both prokaryotic systems such as E. coli and chloroplast. The expressed moricin was purified using Ni columns and SUMOase, and the antibacterial activity of the purified moricin was confirmed using an agar diffusion assay.

• Journal of Life Science
• /
• v.32 no.9
• /
• pp.734-741
• /
• 2022

Currently, around 40 million people worldwide are living with human immunodeficiency virus (HIV) infection making HIV a critical global health risk. Present therapies for HIV infection consist of drug cocktails that target different steps of the HIV life cycle to prevent infection, replication, and release of the virus. Due to its mutating nature, drug resistance coupled with side-effects of long-term drug use, novel strategies, and pharmaceuticals to treat and manage HIV infection are constant needs and continuously being studied. Plants allocate a major repertoire of chemical diversity and are therefore regarded as an important source of new bioactive agents that can be utilized against HIV. Since the early 1990s, upon recommendations of the World Health Organization, numerous studies reported phytochemicals from different structural classes such as flavonoids, coumarins, tannins and terpenes with strong inhibitory effects against HIV infection. The present review gathered and presented recent research (2021-present) on plant extracts and phytochemicals that exhibit anti-HIV properties with the aim of providing insights into future studies where ethnomedical and underutilized plant sources may yield important natural products against HIV. Considering the relation and importance of HIV treatment with current viral infection risks such as SARS-CoV-2, screening plants for anti-HIV agents is an important step towards the discovery of novel antivirals.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.3
• /
• pp.7-22
• /
• 2022

Objectives : This study was a systematic review of tongue movements in stroke patients with dysphagia. This study aimed to provide a basis for verifying the effects of tongue movement and identifying the tendency of tongue movement. Methods : A systematic review was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses checklist and flow chart. PubMed, MEDLINE, CINAHL, RISS, and e-articles databases were searched. A total of six documents were investigated, and the PEDro scale was used to evaluate the quality of the papers. Results : Three intervention methods were included in the six papers analyzed. Regarding the type of tongue exercise, three TPRT (Tongue to Palate Resistance Trainings) and two TSAT (Tongue Strength and Accuracy Training) were mediated through the IOPI (Iowa Oral Performance Instrument), and only one study applied TSE (Tongue Stretching Exercise). The treatment effects for each intervention implemented in the literature were confirmed to be effective. However, generalizability of findings is difficult because of the small sample size. Further, no significant difference was found between the experimental and control groups. Conclusions : This study can help occupational therapists provide efficient swallowing rehabilitation treatment by applying tongue exercises to stroke patients with dysphagia. More research should be conducted to determine the effects of tongue exercise.

• Clean Technology
• /
• v.28 no.3
• /
• pp.227-231
• /
• 2022

The demand for high-voltage power devices is rising in various industries, but especially in the transportation industry due to autonomous driving and electric vehicles. IGBT module parts of 3.3 kV or more are used in the power propulsion control device of electric vehicles, and the procurement of these parts for new construction and maintenance is increasing every year. In addition, research to optimize high-voltage IGBT parts is urgently required to overcome their very high technology entry barrier. For the development of high-voltage IGBT devices over 3.3 kV, the resistivity range setting of the wafer and the optimal conditions for major unit processes are important variables. Among the manufacturing processes to secure the optimal junction depth, the optimization of the diffusion process, which is one step of the unit process, was examined. In the diffusion process, the type of gas injected, the injection time, and the injection temperature are the main variables. In this study, the range of wafer resistance (Ω cm) was set for the development of high voltage IGBT devices through unit process simulation. Additionally, the well drive in (WDR) condition optimization of the diffusion process according to temperature was studied. The junction depth was 7.4 to7.5 ㎛ for a ring pattern width of 23.5 to25.87 ㎛, which can be optimized for supporting 3.3 kV high voltage power devices.

• Journal of Powder Materials
• /
• v.29 no.5
• /
• pp.411-417
• /
• 2022

Environmental issues such as global warming due to fossil fuel use are now major worldwide concerns, and interest in renewable and clean energy is growing. Of the various types of renewable energy, green hydrogen energy has recently attracted attention because of its eco-friendly and high-energy density. Electrochemical water splitting is considered a pollution-free means of producing clean hydrogen and oxygen and in large quantities. The development of non-noble electrocatalysts with low cost and high performance in water splitting has also attracted considerable attention. In this study, we successfully synthesized a NiCo₂O₄/NF electrode for an oxygen evolution reaction in alkaline water splitting using a hydrothermal method, which was followed by post-heat treatment. The effects of heat treatment on the electrochemical performance of the electrodes were evaluated under different heat-treatment conditions. The optimized NCO/NF-300 electrode showed an overpotential of 416 mV at a high current density of 50 mA/cm² and a low Tafel slope (49.06 mV dec^-1). It also showed excellent stability (due to the large surface area) and the lowest charge transfer resistance (12.59 Ω). The results suggested that our noble-metal free electrodes have great potential for use in developing alkaline electrolysis systems.